Our Request has been answered - LEDBlinky 7.0.2.0 - UPDATED!
Рет қаралды 2,611
4 жыл бұрынUPDATE: In the original ending of this video I couldn't get more than 3 LED's to light per MAME output. Arzoo provided me the information and I've updated the video to reflect his response... and I couldn't be happier, the ability to light as many LED's as I want is AWESOME!
I made a note at 7:50 to make sure to get all three port numbers for the LED's when programming an RGB LED, and otherwise the major update begins at 14:55
------------------------------------------------------------
We requested a new feature from Arzoo at LEDBlinky and he delivered! On with the crazy cabinet police lights!!!! Previously we could only light one LED at a time per LAMP/LED from the MAME Output. We requested that Arzoo allow us more LED's per lamp/LED in MAME, and he provided that feature! Check it out! Now, the machine deliberately looks dull until the siren brings the machine to life!
@WingburenArcade 4 жыл бұрын
Holy crap! This is awesome! ARZOO is great! Now we need to do a list with games to use this cool feature with 📃☺️ thanks for the struggle pal! Not all heroes weare capes ❤️
@MavericksArcade 8 ай бұрын
Thank you sir :-) I definitely like Arzoo, open to suggestions and easy to work with.
@pipmick2775 3 жыл бұрын
Freakin' awesome - I love it. Definitely going to get myself LED Blinky - what LED board do you use? Ultimarc I/O or PACLED64? Also, what RGB LEDs can you recommend too?
@MavericksArcade 3 жыл бұрын
I use the Ultimate IO board, and I have Goldleaf buttons, ultralux buttons (chrome and translucent), the joysticks and trackball light up, and hacked ikea lights in my Marquee :-)
@garethwood6587 Жыл бұрын
This is incredible and exactly what I've been searching for!! Can you tell me how your marquee light is built please? I want to get this working for Chase HQ using LEDBlinky and the Pac-Drive unit. How did you set up the file for Chase HQ?
@MavericksArcade Жыл бұрын
Sorry, this is an older comment, but in my earlier videos you can see. When I'm talking about the I/O Ultimate I show how the higher power lights are connected. My old marquee was two IKEA Dioder LED Strips connected to that higher power output.
@rushNbust 3 жыл бұрын
cool stuff, keep thinking to myself "isnt there some prebuilt files for this out there" but of course with the dependencies of button/wire configs would need to match so that makes it tough. wish there was a way to streamline this so that we could have a repository of available files instead of everyone having to reinvent the wheel (or is there some of that already out there? i'm new to this part of the arcade emu scene of LED coolness)
@MavericksArcade 3 жыл бұрын
There are some out there, but if you map weird it could be an issue. If you keep to the standard mappings and default button commands, it should work pretty well, the problem would be that many people through trial and error (including myself) changed their default mappings when they build their machine. Also, the layout may not always be button 1 in the same position for everyone... If you stay close to the standard it should work though.
@remingtonA123 4 жыл бұрын
Hey looking for some input on my four player pedestal arcade I just built I’m using an iPac 4 and for some reason my bottom second to the right is causing player 3 to move right along with activating it’s own move for player 2 I’ve tried everything I could think of any advice would be much appreciated
@MavericksArcade 3 жыл бұрын
First thing I would check would be to verify that they are different keyboard inputs, open notepad, and press each button and make sure they have different inputs. Then in the game, make sure that the input isn't selected twice between the two controls, finally make sure all the mappings between Ultimarc, LEDBlinky, and Mame sync up.
@Quantumchaos_ 4 жыл бұрын
Is there a way to just light the LEDs from the Ultimarc Ultimate I/O without using Led Blinky?
@MavericksArcade 3 жыл бұрын
You can use commands directly per the documentation from Ultimarc, but that would be a bit of a pain :-)
@sgawnmiller3958 4 жыл бұрын
I have an arcade I want to have 2strips light up And do stuff what do I need for this to happen?? Just ledblinky and ledwiz???
@MavericksArcade 3 жыл бұрын
I just use LEDBlinky, I have not tried LEDWiz.
@DiegoSanchez-pl9eh 4 жыл бұрын
hi! did you really need the update or were you just doing it wrong before?
@MavericksArcade 3 жыл бұрын
There were some inaccuracies that I noticed so I wanted to be correct :-)
@advidrunner5104 3 жыл бұрын
Maverick, any chance I can pay you to get file on my thumbdrive to just upload it? Or pay you to set mine up???
@MavericksArcade 2 жыл бұрын
I could help you set yours up, but I don't provide images, ROMS, or any files. You would have to have everything yourself and I could potentially assist you.
@advidrunner5104 2 жыл бұрын
@@MavericksArcade , I have LEDBLINKY already installed and everything mapped. I just don’t know how to setup the red and blue on my marquee and buttons to do what you done. I am happy to pay you for your time. Please let me know when would be a good time for you sir. Thank you in advance.
@MavericksArcade 2 жыл бұрын
@@advidrunner5104 Shoot me an email on my gmail account :-) it's simply mavericksarcade at gmail :-) We can figure something out... This is for a game that runs on MAME and is made to send that output information correct? Which game are you trying to do this with?
@advidrunner5104 2 жыл бұрын
@@MavericksArcade will do boss. Yes, MAME arcade game. The game you showed on your Channel. The Chase HQ one with the blue and Red flashing on buttons and Marquee.
@sgawnmiller3958 4 жыл бұрын
Can I pay you to do the code???
@MavericksArcade 3 жыл бұрын
LOL, depends on which coding you need done :-)
Action C Mini
Рет қаралды 101 МЛН
Сейчас
Рет қаралды 130 М.