Just a quick video on my fun on the rotary table and share my bozos.... Hopefully you enjoy and learn from my fun!!!
Пікірлер: 45
@TangentJim5 ай бұрын
Chuck - Like the Carpenter said -- " I cut this board 6 Times and it's still to short " -- Jim
@outsidescrewball5 ай бұрын
thanks for viewing Jim...
@johnmcanulty73415 ай бұрын
'We're all Bozo's on this Bus' Good catch!
@outsidescrewball5 ай бұрын
LOL...thanks for viewing and you speak the truth....
@DudleyToolwright5 ай бұрын
We all have days like that, Chuck. Nicely, done.
@outsidescrewball5 ай бұрын
thanks for viewing and your supportive comment...
@swanvalleymachineshop5 ай бұрын
Good one Chuck . You got there in the end ! 👍
@outsidescrewball5 ай бұрын
thanks for viewing and your supportive comment...
@hersch_tool5 ай бұрын
That milling machine is so flappin' cool!
@outsidescrewball5 ай бұрын
thanks for viewing and it is an awesome machine, want to finish this and then find some reason to use the horizontal setup soon!
@Preso585 ай бұрын
Walking time is the best thinking time. Lots of problems can be resolved that way. Regards, Preso
@outsidescrewball5 ай бұрын
Thanks for viewing, I agree but with all of my problems I am going to need new sneakers....LOL
@MicksWorkshop5 ай бұрын
Nice, that's what I like about this hobby, figuring out how to make a part and fixing what went wrong with it. It's cool that you did this video talking about the problems you encountered. Great idea on 3d printing one first. I'm going to have to get better at CAD.
@outsidescrewball5 ай бұрын
Mick...I agree, I really like problem solving along with setups on the machines....thanks for viewing
@tilliesinabottle5 ай бұрын
getin' it done! You can do some great stuff on the rotary table, the trick is getting it right. I learned some complicated methods, but still haven't found a simple way to position the part on the table to get an accurate radius cut. If the feature is just cosmetic, then drawing scribe lines and drifting the part around until the cutter is close is good enough.
@outsidescrewball5 ай бұрын
thanks for viewing, suggestion what Joe Pie as he has some very good rotary table videos that explain position
@rexmyers9915 ай бұрын
May the best team win! (I hope it’s the 49ers)
@outsidescrewball5 ай бұрын
thanks for viewing...well we almost won....lol
@CameronMcCreary5 ай бұрын
I would have used an ER Collet attachment on the rotary table; it would keep the part low to the table and give the part more supported. KC Chiefs won the Super Bowl.
@outsidescrewball5 ай бұрын
thanks for viewing and congrats to KC!..I did look at using an ER32, but due to the size of the table, clamping became the issue....
@TheAyrCaveShop5 ай бұрын
I've had the tunnel vision issue many times. Leave it for a few days, or have a buddy come by and point to the problem in couple minutes. LOL Glad see you got it ! The whole clan is coming over for the game today, I'm on barbeque duty... Enjoy all....
@outsidescrewball5 ай бұрын
thanks for viewing Dean....
@tates115 ай бұрын
Maybe you could pop a couple of holes in a piece of round scrap to hold the parts on the correct pcd for the center of the part & turn & bore the rads on the lathe.
@outsidescrewball5 ай бұрын
thanks for viewing and your interesting comment, I did consider using the lathe...
@Rustinox5 ай бұрын
The most important is that you figured it out. And of course also the you had fun with it.
@outsidescrewball5 ай бұрын
Thanks for viewing and as you know we do it for the enjoyment
@bearsrodshop70675 ай бұрын
Burrr 40 in SF is cold. Betting the walk was cut shot ???
@AmateurRedneckWorkshop5 ай бұрын
You are a great trouble shooter Chuck. Did you bet on your team? Thanks for the video keep on keeping on.
@outsidescrewball5 ай бұрын
thanks for viewing and good thing I didn't bet
@royreynolds1085 ай бұрын
A question, please. The centers of the 2 radii are at the same point, correct? Then the outside radius will be the inside radius plus the thickness of the head on the centerline for the proper radius, correct? In that case, the part will need to be moved out the thickness of the head to swing on the new radius, correct? I hope I understand what you are making; I think I do.
@outsidescrewball5 ай бұрын
thanks for viewing and you are correct, that is what I showed on the Fusion drawing....
@terrylarotonda7845 ай бұрын
Super Bowl yep. Just remember My friend second place is still respectable. Setting here in Kansas City, enjoy the game. Still enjoy your channel
@outsidescrewball5 ай бұрын
thank you for viewing and the support of my channel, well we almost won....lol
@ronodowd57245 ай бұрын
Have a great weekend from Windsor Ontario lions should be in not 49ers lol it will be interesting
@outsidescrewball5 ай бұрын
thanks for viewing...congrats to the Chiefs
@richardellis31415 ай бұрын
good one
@outsidescrewball5 ай бұрын
thanks for viewing and your supportive comment
@MyLilMule5 ай бұрын
I do the same thing in Fusion. Let it do the math for me. That "49er's are gonna win" prediction didn't age well. ;)
@outsidescrewball5 ай бұрын
thanks for viewing....hmmmm, did I jinx them....lol, yes Fusion is great and I need to spend more time on learning the software....
@petemclinc5 ай бұрын
What brand DRO will you chose, glass or magnetic scales, 1u or 5u?
@outsidescrewball5 ай бұрын
thanks for viewing, I am thinking of the Airkron, I have talked with them in the past....all selections TBD
@mjwint5 ай бұрын
Chuck, when you made the call for the 49ers did you know Bozo had escaped the shop?
@outsidescrewball5 ай бұрын
yes, I think he made it to the 49ers locker room...LOL
@waynefitch9905 ай бұрын
I miss Howie
@outsidescrewball5 ай бұрын
thanks for viewing, Howie says "woof" to you, I will get him so screen time, this coming Sunday he will get his chance of becoming a daddy...