Overhauling Engine from $400 Jet Ski | 1995 SeaDoo XP 720 | Part 2
Рет қаралды 45,971
3 жыл бұрынThis video is mostly photos of the insides of an old jet ski engine. There are a few attempts at humorous commentary, but realistically you're just looking at oily old aluminum and steel bits. Is that really how you want to spend 7 minutes of your life?
Check out Part 1 for more context and pictures of dirty things:
• $400 Jet Ski COMPLETE ...
▶ This is a link: bit.ly/kobrahamson_sub
Music by Epidemic Sound
epidemicsound.com
@reed.k.h 3 жыл бұрын
MY GOD the sheer amount of KNOWLEDGE in this video is astounding! How is it even possible for someone to be so hilarious and so smart at the same time?!?!
@djdodgejason01 3 жыл бұрын
Just to let you know I have the same motor and the four bolt holding in the exhaust pipe to the exhaust manifold will vibrate out in less you have a exhaust mount under the pipe It’s a two piece mount so make sure you have both pieces in there
@reed.k.h 3 жыл бұрын
@@djdodgejason01 I appreciate the heads up!
@djdodgejason01 3 жыл бұрын
@@reed.k.h yeah it took me for ever to figure out. I tried red loctite on the lm and they still wiggled out and water filled up the bottom of the jet ski
@reed.k.h 3 жыл бұрын
@@djdodgejason01 You're talking about the 4 studs in the exhaust manifold that the tuned pipe mounts to?
@xxblackwhitex 2 жыл бұрын
I was literally thinking the same thing! Glad someone else is a fan
@joeyhilliard9263 3 жыл бұрын
I came here for guidance on how to rebuild my own sea doo. I left laughing my ass off. Thank you sir.
@reed.k.h 3 жыл бұрын
I may not be able to provide any guidance, but at least I can provide some mediocre humor.
@xwrench4242 Ай бұрын
The best humour 😂
@Jetskianguy 3 жыл бұрын
Ok, but let's be honest here that carb montage was dope.
@reed.k.h 3 жыл бұрын
"Things people never say"
@trofazz 2 жыл бұрын
Lesbianist.... Damnit... look what the op is doing to our minds....
@yorkbrick 2 ай бұрын
"Empty Nip Receptacle's" FUNNY....I look foward to the rest of the rebuild series.
@reed.k.h 2 ай бұрын
It only gets weirder.
@lawrencefranck9417 3 ай бұрын
An old painter once told me “if the old paint is that stuck boy why are you removing it.”
@chadimerhi9957 3 жыл бұрын
If you keep up this quality of videos your gonna go viral man for real. Super funny and underrated. Subbed!
@reed.k.h 3 жыл бұрын
Woah yeah that would be pretty cool
@MechInvent 2 ай бұрын
I can't tell if i learned more or less from this video about rebuilding my 440. Lol
@reed.k.h 2 ай бұрын
I don’t blame you, this rambling hurts the brain
@TheStephenspann27 3 жыл бұрын
Hilarious video. The dark piston tops actually indicate a lean condition. When the engine is rich the piston tops will be clean near the it wor ports, this is called “piston wash.” You want some piston wash.
@reed.k.h 3 жыл бұрын
I'm glad someone knows what they're talking about. Why would a lean condition leave carbon buildup?
@wkualum3194 3 жыл бұрын
Just got yourself a new sub. Awesome editing! Can't wait for part 3.
@reed.k.h 3 жыл бұрын
Hell yeah, that means a lot, thanks!
@mikeeastmond1020 Жыл бұрын
The commentary 🤣🤣🤣.....Priceless!!!
@wesleyhernandez62 3 жыл бұрын
Im literally in tears right now! Hahaha This is gold !! Keep up the great work !
@reed.k.h 3 жыл бұрын
Yeah I cried a little bit while editing this also... wait, what kind of tears did you mean?
@dugbug123 3 жыл бұрын
Dude this gold like a golden shower
@LakeOasis88721 3 жыл бұрын
Just subscribed. Your content is awesome. A mix of humor while watching a cool project and what looks to be like some quality work.
@reed.k.h 3 жыл бұрын
Glad you're into it!
@michelangeloficarro8347 3 жыл бұрын
Ill never stop watching these great videos
@reed.k.h 3 жыл бұрын
Never? Damn, you're dedicated
@michelangeloficarro8347 3 жыл бұрын
Dedication that spilled over into watching you paddle around a pond and oogling moose which got me through lunch and late back to work. 🐌
@reed.k.h 3 жыл бұрын
@@michelangeloficarro8347 Sounds like a well-rounded lunch break.
@SpenserPetersonVT 3 жыл бұрын
That’s a thorough refurb! That takes a lot of patience, especially with such a thoroughly dirty machine. I especially enjoyed the part where you put the stuff on the engine and the stuff didn’t come off so you put the other stuff on the engine and the stuff still didn’t really come off and now I don’t even know what to think. Looking forward to summer when you will venture out to the islands with me and my canoe in tow.
@reed.k.h 3 жыл бұрын
Well you know what they say, sometimes stuff comes off and other times it doesn't. It will just require an extra thick coating of paint. I'll gladly tow you out to the islands, as long as you serenade me with rousing sea shanties in a cappella.
@jochute 2 жыл бұрын
great videos thanks
@trofazz 2 жыл бұрын
Great stuff, thanks for the info. and entertainment... Subscribed...
@reed.k.h 2 жыл бұрын
Awesome, thank you!
@teabag1680 3 жыл бұрын
You edited out the most best and satisfying parts of a rebuild video! Pressure washing, wire replacements, hose replacements, etc etc... all you did was show us a photo album. Ughh
@reed.k.h 3 жыл бұрын
2:15 I know, I know... that's my excuse
@jedidiahdyer2093 3 жыл бұрын
Finally! A youtuber that is a smart a$$ too! What an awesome series. Glad to have found this. Subbed!
@reed.k.h 3 жыл бұрын
You just get me.
@samcole129 2 жыл бұрын
I have not laughed this hard in forever. And IM ONLY ON VIDEO 2!!!!
@MTOhRyan 3 жыл бұрын
Bro buy Toys like this, fix them up, and you are likely to grow in the ranks of youtubers. Commentary is funny af and enjoy learning new things too and watching things be fixed.
@reed.k.h 3 жыл бұрын
🤘🏻 👊🏻 💯
@3mteers 3 жыл бұрын
Freakin hilarious! So glad I stumbled across your channel! Planning to do a more half-@$$ed version of this to my skis this spring. Awesome work!
@reed.k.h 3 жыл бұрын
Hey thanks! I do love some external validation.
@justinlapoint 3 жыл бұрын
Where are the jet ski babes? Give the people what they want!!
@reed.k.h 3 жыл бұрын
I'm working on it. If you have any babe leads, let me know.
@victorbergersen 3 жыл бұрын
All the good jokes just earned you a subscriber
@reed.k.h 3 жыл бұрын
What about all the bad ones?
@jasminerodrigues4716 3 жыл бұрын
Can you please do a detailed video regarding the wiring/fuse box rewiring.
@reed.k.h 3 жыл бұрын
That will be coming in Part 3!
@cookiesfdd 3 жыл бұрын
I'm a fan!
@reed.k.h 3 жыл бұрын
Thanks, me too
@zanetrumpold8287 2 жыл бұрын
You have the jokes of a dad that just found what memes are
@reed.k.h 2 жыл бұрын
What's a meme?
@jeraldobermudez6216 3 жыл бұрын
Plz keep the videos coming I’m rebuilding my 99 Yamaha gp800r engine too
@reed.k.h 3 жыл бұрын
Part 3 in a week or so!
@arturpiatek6186 23 күн бұрын
I subbed at "I strapped an engine to a tree"
@reed.k.h 22 күн бұрын
That's the best spot to sub
@imdefinitly18now Жыл бұрын
I wish I knew what purple paint you used on your exhaust, came out awesome!
@reed.k.h Жыл бұрын
www.amazon.com/Dupli-Color-DE1640-Ceramic-Purple-Engine/dp/B00295T6V8
@imdefinitly18now Жыл бұрын
@@reed.k.h honestly thank you, cheers
@Sabs90 2 жыл бұрын
Bro… the fucking into music 😂😂😂
@danielaragon6058 3 жыл бұрын
😎 funny video bro like your videos😅😅😎👍💯💯💯
@reed.k.h 3 жыл бұрын
😍
@phaslon77 3 жыл бұрын
My god you are gold sir!! Came here for insights for working on my own old seadoo but gave up on it, its at the shop now. I was wondering though, are you a mechanic by trade or just a hobby?
@reed.k.h 3 жыл бұрын
Mechanic might be a strong word. I take things apart and put them back together as a hobby.
@retodd4259 3 жыл бұрын
Ive found my long lost child, I think.
@reed.k.h 3 жыл бұрын
Dad?
@tylermcguirl8342 3 жыл бұрын
Hey man I literally just bought the same exact jet ski as a project an was wondering if you could give me some help
@reed.k.h 3 жыл бұрын
What sort of help do you need?
@crankitup9904 3 жыл бұрын
I’ve got a question. Have you replaced to oil on it yet? If so do you have to drain it from the back by the impeller or is that just the gear oil? Or is it the same?
@reed.k.h 3 жыл бұрын
Check out Part 4! The oil in the impeller cone is gear oil for lubricating the impeller bearings, different from the injection oil that lubricates the engine. The injection oil tank is the small one on top of the gas tank.
@crankitup9904 3 жыл бұрын
@@reed.k.h so where does that mean the drain plug for the injection oil for an oil change? Because I took off the cone thinking all that oil was injection oil and not filling it back up with gear oil, instead I just filled it up with injection oil.
@reed.k.h 3 жыл бұрын
@@crankitup9904 There's no drain plug for the injection oil. You just have to pull one of the hoses off the bottom of the tank and try to catch all the oil as it drains. It's not designed to be changed, just topped off as it's burned in the engine. BUT if the ski has been sitting for a long time or you know the oil somehow got dirty, definitely change it.
@benover227 2 жыл бұрын
I got a 1996 Xp in 2022 I still can make her 12 o'clock on your new shit
@salvykc1379 3 жыл бұрын
Expect longer wait times then what they told you from full bore
@reed.k.h 3 жыл бұрын
Yeah, that's what I've heard. I sent the cylinders out in November in the hopes that they'd be done by April-ish.
@vancouverreefing 2 жыл бұрын
Can someone tell me what the name of the song that starts at minute 4 is? Or link to it?
@reed.k.h 2 жыл бұрын
Ooyy - Come 2gether
@vancouverreefing 2 жыл бұрын
@@reed.k.h YES!!!!!! I've wanted to know the name of this song for months! Thank you!
@vakkifn9814 2 жыл бұрын
Love the jokes🤙
@BellyUpFish 3 жыл бұрын
Oof sent to FullBore.. Do you have your cylinders back yet?
@reed.k.h 3 жыл бұрын
Haha I learned my lesson... got 'em back after 6 months.
@BellyUpFish 3 жыл бұрын
KobraHamson Did they actually do the work?
@reed.k.h 3 жыл бұрын
@BellyUpFish Yep, it was actually a quality boring/honing job, if you don’t mind waiting half a year for a job that takes an hour.
@BellyUpFish 3 жыл бұрын
KobraHamson Wow. I know a guy who has been waiting 11 months.. 😆 Still has nothing back. I have heard when they show back up it’s quality work.
@reed.k.h 3 жыл бұрын
@@BellyUpFish I bugged them pretty relentlessly until they got my shit done. They do good work, but I still wouldn't use them again.
@boklevie1570 3 жыл бұрын
When’s the new vid coming
@reed.k.h 3 жыл бұрын
Ha who knows. Sometime in the next couple of weeks, I hope. Hang in there, it's gonna be worth it.
@erikhansen5172 3 жыл бұрын
Dead funny!
@suckmyfnballs 3 жыл бұрын
Spline tool? There's another needed link.
@reed.k.h 3 жыл бұрын
bayareapowersports.com/i-2057-seadoo-kawasaki-impeller-removal-install-installation-tool-2-stroke.html
@intotheadventure2592 2 жыл бұрын
We have 2 skis liek this and the top end blew up. We rebuilt and honed It and 2 years later rod bearing blew
@reed.k.h 2 жыл бұрын
Damn, that's a bummer
@rocaley 2 жыл бұрын
wait! are you Benjamin?
@skateerjesus3991 3 жыл бұрын
I don't know why you didn't try to start it first
@reed.k.h 3 жыл бұрын
It's a secret
@ernie-xg6vr 2 ай бұрын
Interesting video but it would be much better if you could level out the music to your voice or just not use music. Thanks.
@reed.k.h 2 ай бұрын
Agreed, I annoy myself when I rewatch these videos
@denisgomezdevarona1415 2 жыл бұрын
🤣🤣🤣🤣🤣🤣🤣
Erickson Machine & Performance
Рет қаралды 14 М.
Garage 54
Рет қаралды 4,1 МЛН
ENZO
Рет қаралды 1,8 МЛН
Остаться в живых
Рет қаралды 3,3 МЛН