Overland Roof Rack Build for Roof Top Tents. Ultimate Land Rover Discovery Build Episode 2.

Рет қаралды 303,963

4 жыл бұрын

Today on Dirt Lifestyle, I'm building an Overland roof rack! I'm building this specifically to mount my roof top tent on my Land rover Discovery 2.
This video isn't necessary a full diy but I intended it to be helpful for those of you that are new to fabrication or looking for inspiration.
I know the overlanding world is full of do it yourselfers that want to start building projects like this. I hope this video can help some of you get going in the right direction! These are very expensive. Building a roof rack yourself is rewarding and can save you money.
Enjoy the video!
AMAZON ITEMS!!! www.amazon.com/shop/dirtlifes...
(Amazon Affiliate Links)
BARNES 4WD COUPON CODE: "dirtlifestyle" 10% off
NORTH RIDGE 4X4 CODE: "dirtlifestyle" up to 20% off www.northridge4x4.com
EMPIRE ABRASIVE CODE: "dirtlifestyle" 10% off lddy.no/qf79
YANKUM ROPES CODE: "dirtlifestyle" bit.ly/yankumDL
ONX MAPS: webmap.onxmaps.com/account-pu...
MIDLAND RADIOS: bit.ly/2IjmlZD
STEP 22:
EVOLUTION POWER TOOLS CODE: "dirtlifestyle" store.evolutionpowertools.com/
JOOLCA HOT WATER HEATER: bit.ly/37qLgEp
Shirts & Hats on our website!!
www.thedirtlifestyle.com
Support us on Patreon! / dirtlifestyle
Follow me on social media!!
Instagram: / dirtlifestylenate
Facebook: / dirtlifestylenate
DISCLAIMER:
Due to factors out of the control of Dirt Lifestyle, we cannot guarantee against improper use or unauthorized modifications of this information. Dirt Lifestyle assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Dirt Lifestyle recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Dirt Lifestyle. Be safe!
This video and description contains affiliate links, which means that if you click on one of the product links, I'll receive a small commission.
#overland #overlanding #overlander

Пікірлер: 505

@scottzarkos3466 4 жыл бұрын

13 mins in im like hes not gonna dimple anything? whaaaaat? and then 15 seconds later i laughed haha thanks in these hard times. nate you da man.

@DirtLifestyle 4 жыл бұрын

Lol thanks man

@southernmudder2 4 жыл бұрын

Please do a build/assembly video of your pipe bender explaining parts and a how-to

@JoeGarofaloII 4 жыл бұрын

This has got to be the most underrated channel on KZfaq...I hope that the success catches up to what you deserve Nate!

@DirtLifestyle 4 жыл бұрын

Thanks man! That's a big ass compliment 👊

@JoeGarofaloII 4 жыл бұрын

@@DirtLifestyle Of course! I know to some extent the hours upon hours of work behind the scenes you do for planning, editing etc. Plus the amazing videography, content, skills and personality you display. Then you invested in yourself to build a legacy for your family and it seems like it's starting to pay off. This is just the tip of the iceberg for you man. Keep doing your thing and you're gonna be unstoppable! Congratulations, you earned it and I'm just happy to watch and learn!

@VistaViews 3 жыл бұрын

While I don't agree with 100% of Nate's @dirt lifestyle ideas, this channel IS certainly underrated. I think the main places I disagree on most points are PURELY more along the artistic side of things, but that doesn't mean he wrong, it just means we have different methods or like different looks... Nothing wrong with that either. I personally love this channel!

@jsmcdon1 2 жыл бұрын

Joe, I agree 100%. Nate has sooo much talent and he’s really great at making these videos. Very fun to watch and great design ideas. I just can’t get enough of Nates videos.

@henrikm4657 4 жыл бұрын

Only thing that bugs the hell out of me are the KZfaq trolls that give the thumbs down to every awesome video I’ve ever watched. They must be really sorry ass individuals.

@DirtLifestyle 4 жыл бұрын

I couldn't agree more. I've never given a thumbs down on a video. If I don't like the video I just keep it to myself and move along lol.

@jacobenglish2062 4 жыл бұрын

Your Chanel has grown to be my favorite thing to watch. I’ve learned so much from you as a beginner fabricator

@DirtLifestyle 4 жыл бұрын

Thank you!

@clydetracy77 4 жыл бұрын

I welded and fabricated for 10 years on other people's dime but when it comes to doing my own stuff I find it very difficult. Every time I watch your videosIt makes me want to run outside and start fabing on my own Jeep. You also make me feel silly for just wanting to buy something. Lol. And your work is better than 90% of the "Professionals" I have worked with. No joke, and that includes me.

@DirtLifestyle 4 жыл бұрын

Damn thanks man! This is a huge compliment and really appreciate it 👍

@davidsinclair6977 4 жыл бұрын

In the bagining of the video you said you liked the double layer of tubing I agree and think if you fallow the same angle and line of the bottom light holder tube and and add a second layer to the back top portion it will come out looking pretty darn nice but like the project anyways thanks for sharing it with us

@MotivxTools 4 жыл бұрын

Those new lights look sweet

@DirtLifestyle 4 жыл бұрын

Thanks!

@dextonbrock2754 4 жыл бұрын

Not gonna lie. I've never even given a second glance at Land Rovers. But you've got me thinking about it. Love the content.

@DirtLifestyle 4 жыл бұрын

I never considered them either but my family has fallen in love with this thing 👍

@Gettinbentoffroad 4 жыл бұрын

Just got me a bunch of scrap steel about to start making me my new full size roof rack on my 3rd gen 4Runner

@jraddd3477 3 жыл бұрын

I just got done building 2 for the wife and I's runners, came out pretty heavy at 120lbs each but expanded steel at the bottom, 1.5" pipe at the bottom with 1" pipe for the top basket, if you want photos of what they look like done for ideas lemme know

@WeBleedGreen1 4 жыл бұрын

Theres a gentleman in Tigard Oregon that specializes in racks for roof top tents. Look into rack attack and they should be able to set you up with a roof top tent that will go nicely on that build

@EvanMoon 4 жыл бұрын

Looks like something to be following dinosaurs in Jurassic Park, Super cool

@DirtLifestyle 4 жыл бұрын

Lol yes it does

@PaulKaiser42 4 жыл бұрын

Nice rack Nate!!! Lol!!! I’m surprised your mailman did not say the pipe bender was to heavy....🤣😂 like last time you ordered from swag!!

@DirtLifestyle 4 жыл бұрын

Lol thanks! They sent it through a different courier this time 😂

@Payton_The_Cook 4 жыл бұрын

Thank you for making Land Rover content that isn't a repair video. The D2 is so under appreciated. Started watching because of the Disco but now enjoy all your work👍🏻

@DirtLifestyle 4 жыл бұрын

Thank you! I'm suprised more people don't build these!

@dreamassassin2689 4 жыл бұрын

great video.. put your amps high enough to cause a puddle quickly.. 2-3 seconds or so to start puddeling. Keep your torch as strait as you can, to your material that you are working on. and hold your welding rod closer .you will get better control of the rod when you are closer to the material, just dont toast your hand by getting too close. 1/8 inch or so each dab and keep your material clean clean clean, and as close together as you can get it.. tig does not like gaps,

@erichicks2840 4 жыл бұрын

I love it. Cut it and snug that bar next to the lights, if you do it give yourself room to pull the lights out. Either way it looks Awesome

@StephenHarristnt 2 жыл бұрын

Bro, I love your work. Your "okay" is 1000% better than what I normally get from 'experts'. And you have a great eye for design. Keep up the great work.

@mrdrprof99 4 жыл бұрын

Gonna use these ideas for a bull bar on my Frontier

@travel-warrior 4 жыл бұрын

Great video, i love all the extra attention to detail. The difference between a cowboy and a true craftsman. Good job

@DirtLifestyle 4 жыл бұрын

Thank you!

@gdazey1 4 жыл бұрын

Yes more Overlanding please.

@maijhiselemani458 4 жыл бұрын

Thank you for the lesson... you're a huge inspiration...

@DirtLifestyle 4 жыл бұрын

Thank you very much 👊

@michaelhalstead64 4 жыл бұрын

4 LP6 is gonna be baller!!! Nice.

@Datsuntech 4 жыл бұрын

Looks great! Only one small thing I would have done differently. I would have ovaled the tube at the end where you attached the bar stock. It would have given it more symetry and made the attachment stronger. Of course this would have necessitated reworking the clamps.....Just my opinion.

@thethepete731 4 жыл бұрын

I would add some type of gusset to those light tabs. The vibration with the weight of the lights on them is going to guarantee a fatigue failure. Any small amount of vertical reinforcement will make a significant difference.

@thethepete731 4 жыл бұрын

The rack is gorgeous, btw. Love the design, and BD lights are the best. I'd just hate to see all your hard work come crashing down into the windshield as you're getting your overlander on.

@onetruebob_tj 4 жыл бұрын

Bad ass! The lights look great on the front. You can tell you've worked a job that required you to troubleshoot problems and solve them. When you have to change your plans, I can almost see the wheels turning. Keep the videos coming!

@DirtLifestyle 4 жыл бұрын

Thank you! 15 years of being a plumber taught me alot!

@kirklynschultz4184 4 жыл бұрын

Really workin them REDs into the video. 🤣 I dig it man. You gonna get up that boat ramp hell or high water. 🤘

@DirtLifestyle 4 жыл бұрын

Damn right I will!

@kirklynschultz4184 4 жыл бұрын

Hell yeah man 👊

@stronghandranch5227 4 жыл бұрын

Best looking DIY rack on KZfaq. Seriously great work. Roof racks can get ugly real quick and this is a piece of art.

@DirtLifestyle 4 жыл бұрын

Thank you!

@Stefoshark 4 жыл бұрын

Hi from Canada, nice job, very nice job friend ,a true masterpiece

@DirtLifestyle 4 жыл бұрын

Thank you!

@Carman-2012 4 жыл бұрын

Nice finished product Nate 👍

@phillippearce9680 4 жыл бұрын

As expected, another great video!

@mightysnafu 3 жыл бұрын

The way you put things makes a lot of projects less intimidating. Well done and thank you for the great content and info.

@wyattoneable 4 жыл бұрын

Ah man that came out great. I just finished binge watching Ian Johnson on Extreme Off Road via a streaming service on my TV and I was about burned out of watching tubing get bent and welded. Nope. I was wrong. I found this very interesting and entertaining. 30 minutes flew by.

@DirtLifestyle 4 жыл бұрын

Lol thanks man!

@williamdomey7584 4 жыл бұрын

Your Chanel is one of my favorite ones. That rack came out great. I wish I was as talented. That rack would look good on my Cherokee.

@ZJ_Rubicon 4 жыл бұрын

That design is awesome! Can't wait to see it all painted up with a tent on it.

@jimferguson602 4 жыл бұрын

You were the beat on bleepin Jeep and your still the best now. Love your huge shop btw

@DirtLifestyle 4 жыл бұрын

Thank you!

@JoeGarofaloII 4 жыл бұрын

Ah hell yea, I've been wanting to build one of those for my suburban!!

@andrewcgillespie 4 жыл бұрын

One word only - AWESOME!

@HowardR911 3 жыл бұрын

I appreciate your attention to detail, and the music was extra good this time.

@jeremyweathersbee2733 4 жыл бұрын

Sweet project it turned out way better that I saw in my head. Those lights are going to be like cannons.

@fatalfromabove8943 4 жыл бұрын

Brother get you a battery powered leaf blower just for dust, open the garage door and blow the dust out! Not for bigger projects tho.

@Adrian-rn1ym 4 жыл бұрын

U can’t show big sticky tires on a off road channel and not tell us what’s going on with em !!! Lol awesome video sir !! Amazing work

@DirtLifestyle 4 жыл бұрын

Lol these will be the reason I upgrade the axles on my TJ!😂

@cole33333333 4 жыл бұрын

That is one good looking roof rack.

@boondock54x4 4 жыл бұрын

Good evening, Sir I definitely was sceptical about this, as I believe you were, in the beginning. It turned out fabulous! Keep up the good work! :)

@mattcobb1937 4 жыл бұрын

Love this build. Going to do this for my JKU!!! Thank for sharing

@4runner4wd79 4 жыл бұрын

What...another great video? So spoiled here, thanks for sharing this.

@DirtLifestyle 4 жыл бұрын

Thanks!

@MultiDodgedude 4 жыл бұрын

That is a sweet looking rack, the dimple die plates and attaching tubes make it POP!!

@sfkeygrip 4 жыл бұрын

thanks for the inspiration. I have been wanting to build a rack for my jeep JL and you gave me some good ideas to start working on it

@jeshuaoffroad9791 4 жыл бұрын

Love it man! Looks awesome

@Jack_of_the_Trade 4 жыл бұрын

Something to consider, if you haven't got a name for the discovery I think you should name it the "Disco rhino". Lil cheesy but it fits so well. Love the channel, keep on with the dream.

@DirtLifestyle 4 жыл бұрын

Lol thanks brother

@nickt9968 4 жыл бұрын

Good job as always, can`t wait for the paint video!!

@larrysmith2137 4 жыл бұрын

Nate your skills are amazing. Can’t wait to see more TJ build.

@DirtLifestyle 4 жыл бұрын

Thanks!

@bryonw.1446 4 жыл бұрын

Looks awesome!! Love the lines you came up with. Your works shows in the details. Favorite quote out of this one: “I have the oversized nuts”. 😂😜 Sorry the kid in me....

@DirtLifestyle 4 жыл бұрын

Lol 👍

@MonkeyWithAWrench 3 жыл бұрын

holy crap, i'm doing a cargo rack integrated into an exocage on my wifes 4 door tracker, when you flipped your rack over upside down it gave me an idea of how i want to build it! i need to buy a tube roller now!

@charlesreynolds1619 4 жыл бұрын

Turned out awesome! I agree the bar above the lights would look better a tad lower, but it still looks great

@robertmills794 3 жыл бұрын

Your work is simply dope! WOW!

@JustJeep_It 3 жыл бұрын

Awesome job. Love your fabrication style.

@stevenadelhoch6811 4 жыл бұрын

Great guy, very skilled fabricator!

@DirtLifestyle 4 жыл бұрын

Thanks buddy 👍

@cway444 4 жыл бұрын

That's a work of art. Good job. Thumbs up

@DirtLifestyle 4 жыл бұрын

Thanks!

@thatmand4542 4 жыл бұрын

Man i just love that dimple/gusset plate on the rack ive always loved the dimple die look :D

@tropicalco2339 4 жыл бұрын

Do it for Dale!

@mikehoffman3690 4 жыл бұрын

Love the look of the build.

@DirtLifestyle 4 жыл бұрын

Thanks buddy!

@shanes_bs2659 4 жыл бұрын

I love your fab videos. I was a welder fabricator for 5 years (i miss it)and you have inspired me to expand my skills on my truck projects.

@jrchambon4746 4 жыл бұрын

Such a badass! Such a big brain! Thanks for your effort.

@dvonehrlich 4 жыл бұрын

I like the high bar front of the rack on the Discovery, it’s like a crown for the British off-roader. Slap some fake jewelry and finials on it. I really enjoy these fabrication videos, even though I doubt I will ever get a chance to do anything like your projects.

@DirtLifestyle 4 жыл бұрын

Lol thanks man! Your right, it is like a crown 😂

@bgnoggin 3 жыл бұрын

You've inspired me for a rack for my early Bronco. Been working on it the past several days. Wish I could post a pic. Great video!

@jsmcdon1 2 жыл бұрын

Nate, I can’t than you enough for all the work you put into these videos. The filming, actual fab, editing, etc., has to be a huge about of your time. You are doing the fab community such an incredible service with your talent and these videos. You deserve all the kudo’s in the world. Thank you soooo much!! Jeff

@user-ch1vu8bk2k 3 жыл бұрын

The channel I was looking for!

@independentcontractor1633 4 жыл бұрын

Looks awesome , Getting ready planning one for my 87 Burb.

@amdviperxd98b 4 жыл бұрын

Looks good on the Disco.

@constructiontech1970 4 жыл бұрын

Nice Nate, look's great!!

@ericmillier6652 4 жыл бұрын

Wasn’t sure what to expect with this topic, roof rack, being it’s not really something I’m thinking about building or have built in the past. Turns out I learned a lot. Thanks for the video and keep it up! Oh yeah and those lights are gonna be amazing!!!

@yaelrodriguez8322 4 жыл бұрын

You hit it!!! Awesome work sir 👍🏻

@4570levergun 4 жыл бұрын

Very clean looking. A true craftsman.

@DirtLifestyle 4 жыл бұрын

Thank you!

@matth4069 4 жыл бұрын

Love the discovery videos. Gives me a lot of ideas for mine. I actually have an 03 Jetta TDI big turbo so I like the motor swap idea.

@jacobroloff8930 4 жыл бұрын

Looks awesome! Keep up the good work!

@jayjaybarff847 4 жыл бұрын

3M welding paper is great stuff. Sticks like tape and is nearly as good as a welding blanket. It's a bit spendy but it lasts a little while.

@juniorvazquez9000 2 жыл бұрын

Beautiful work. 👍

@SWBCrawler 4 жыл бұрын

Awesome work man, as always. great looking rack, great editing, and great explanations.

@landergoni5730 3 жыл бұрын

It is absolutely amazing!! Would fit great in my silver Disco2!! 🤩🤩

@vgullotta 4 жыл бұрын

Man, that rack looks awesome!!! I love the rounded bar in front, and i love the round lights!! I think personally, I would have done one or two square tube supports between those two bars in the front, instead of the plate with dimple dies, but it wouldn't really be dirt lifestyle if it didn't have some dimple dies in it lol

@patrickjamesmcb 4 жыл бұрын

Killed it!

@Dutch1951x 4 жыл бұрын

Great video! Learned a lot, thanks!

@bill1.4all8 4 жыл бұрын

Looks gnarly 👍🏼

@tdmallet 3 жыл бұрын

Man, great work. Really wanted a close up look at the final piece that you fabled to cinch it down to the top. Great channel

@WalterCook-wh2ue Жыл бұрын

As a fellow fabricator and tube bender, it looks great

@YankumRopes 4 жыл бұрын

Nate, you read my mind, I’m gearing up to start my roof rack build 👊🏻😎 your work is just beautiful.

@DirtLifestyle 4 жыл бұрын

Nice! That will be a fun project on the yota 👍

@FoamSquatch 4 жыл бұрын

Thanks for this video Nate, last thing I need is a rover, but seeing you mess with this one thinks it would make a good family rig once I start going overboard with my TJ.

@erik3079 2 жыл бұрын

Bro this is outstanding.

@adamaldinger6960 4 жыл бұрын

Looks awesome!

@jujubaism 4 жыл бұрын

Such amazing work

@JBM-yr3xw 4 жыл бұрын

Your videos just get better and better. Keep them coming, your one of the few channels I look forward to watching when new videos come out!!!

@DirtLifestyle 4 жыл бұрын

Thanks man! I really appreciate it!

@crashtke 2 жыл бұрын

Really enjoyed this one and the finished product looks amazing.

@TYRONICAL23 4 жыл бұрын

Amazing content always on point!!

@normlenhart9565 4 жыл бұрын

Good job! I like it. The added height on the upper bar is a good thing IMO, just in case something really big whacks the top. Granted, it'd have to be tree sized, but since it's there, it's good to go.

@DirtLifestyle 4 жыл бұрын

Thanks brother 👍

@comingtofull-ageinchrist6736 2 жыл бұрын

great idea on the rack fastener too, and I agree, it will make a huge difference on the appearance of the rack. No matter how the rest of it looks, you're right, one little thing like that can take a lot away from it!

@erichughes9098 4 жыл бұрын

Nate, you continue to make great videos thank you.😎👍

@rafaelrene1968 4 жыл бұрын

This roof rack looks amazing , man you are so talented.

@DirtLifestyle 4 жыл бұрын

I really appreciate it brother 🤘

@mrwilly66 4 жыл бұрын

Just a thought on the mounting and clamps... Over bend the legs and tapper the inside edge with plate. Same outside look and narrow the mount to fit nicely. Great job as always. Really enjoy watching your channel and remembering the good ole days in the shop!

@Kevintherubiconjeep 4 жыл бұрын

You videos are the best produced and info packed how to I have seen. Storing info for when I have time and materials some day.

@DirtLifestyle 4 жыл бұрын

Thank you!

@grn9209 4 жыл бұрын

Love the channel 👏🏼. Love the craftsmanship

@tomohawk5567 4 жыл бұрын

That's the best roof rack iv seen in a long time ,not just a mass production piece crap, perfect fit. Great video thanks for sharing new subscriber 👍🇬🇧

@DirtLifestyle 4 жыл бұрын

Thank you very much! Welcome aboard 👍