Overspray Removal: from clear coat only

  Рет қаралды 215,812

Apex Auto Detail

Apex Auto Detail

Күн бұрын

This video shows over spray removal from clear coat. Different ideas, methods, chemicals, tools. Overspray can be almost ANYTHING! Epoxy ,paint, tar, road paint, etc. I show where I always start to remove the mess on clear coat.
Rapid Remover:www.sears.com/rapidtac-rapid-r...
Clay bar:www.autogeek.net/detailing-cla...
Angelwax compounds:angelwaxnortheast.com/
nano skin:www.autogeek.net/nanoskin-car-...
3M wet sand products:www.3m.com/3M/en_US/home-impro...
apexautodetail.com apexautodetail.com
#apexdetail #overspray #autodetailing

Пікірлер: 156
@orvillespooner1
@orvillespooner1 4 жыл бұрын
I was clear coating some brackets outdoors and it was windy. Later I found that the clear coat had blown around the outside of my garage and landed on my brand new white Dodge Caravan with 400 miles on odometer. 2/3 of the vehicle had a fine cured rough mist including headlights and taillights. I panicked. bought an expensive Groits buffer and it hardly touched it. I couldn’t find Rapid Remover so I tried Goof Off as someone recommended. Didn’t touch it. Then I got a fine cut clay bar and with a detailing spray as lube. Amazing- it took it all off including from the light lenses and the glass. This video was a lifesaver.
@stevepoole6830
@stevepoole6830 4 жыл бұрын
Thanks so much for this video. Attempted my own driveway rattle can paint repair that turned out to be a mess. After watching your video - I opted for the acetone removal method. Worked like a charm ! Removed both clear coat and paint over spray. Used microfiber cloth. Front fender and half of hood. After removal - everything was reset to factory finish... or at least to a used car paint finish.
@nickmakris2971
@nickmakris2971 6 жыл бұрын
Dude!!! I had lacquer over spray on a 2000$ vanity tile and fixtures, that rapid removal is amazing! Thanks jenifer @ TG Graphics
@ArthurElizondo
@ArthurElizondo 4 жыл бұрын
Thanks for showing us multiple methods. I have an Acousticn Guitar that a previous owner painted a 3 leaf red clover on the body. Then the front of the guitar body was badly painted with Laquer. I used Laquer Thinner to remove the overspray on the bottom fretboard keys. I continued with it for the rest of the keys. It was a quick job. I also used Laquer Thinner on the pick guard. It worked as well. I started using it on small areas of the guitar body and it worked with a little damage. Your video suggested Rapid Remover. I have Goo Gone and that didn't work but it shinned up the pick guard a little. Your video also mentioned Acitone. That worked much better than Laquer Thinner on the guitar body. I tried a small area and will now clean the overspray that is underneath the guitar strings. Yea, the guitar was Laquered with strings on. Who knows maybe the laquer will give the guitar a majic sound. At least the strings won't rust for a while. :)
@lindafoxwood78
@lindafoxwood78 4 жыл бұрын
Great video guys!! I used a spray can paint on my 11 year old car and the color did not match. It was horrible what I did to my car, I was getting ready to have the entire car painted by professionals when I came across your video. I tried so nail polish remover with good results, but had a quart of M.E.K. thinner out in the barn; that worked great. Cleaned all the spray paint off the car in under an hour.
@ridered7262
@ridered7262 5 жыл бұрын
Thank you, I'm going through this right now trying to remove overspray from hood and door because quarter panel on truck got fixed. I have a orbital polisher but I just have #4 ultra finishing polish and took some overspray off but still rough. I'm thinking just get a cut compound.
@luisfernandoparramartinez81
@luisfernandoparramartinez81 5 жыл бұрын
Hello Brian and thanks again for another great video. Since you have used citrol on other cases and videos which one works better?, Is there any difference?
@AnthonyChew
@AnthonyChew Жыл бұрын
Definitely wet sanding, the result after polish and waxing is superb!
@berghuisbs
@berghuisbs 5 жыл бұрын
Excellent video! One of the best how-tos.
@cr4zym3x1c4n
@cr4zym3x1c4n 2 жыл бұрын
Great! Just re did my whole carbon fiber hood, and got tons of overspray (first time) I got 3,000 grit and plenty of different compounds for my orbital machine. Practice makes perfect
@dwad9162
@dwad9162 2 жыл бұрын
I’m frustrated with my carbon fiber hood right now. Can you tell me what you did? I wet sanded mine then clear coated, tried sanding down the clear coat but it did not work. Did you use a machine to sand yours or by hand? What compounds did you use. I’m really in need of help.
@joshgore8256
@joshgore8256 4 жыл бұрын
You're my new hero, dont tell my dog
@jhorge62
@jhorge62 2 жыл бұрын
Thank you Thank Thank you! This is exactly what i've been looking for in a demo/ solution.
@tandemmatt
@tandemmatt 3 жыл бұрын
Hey Brian, thank you for all your help through these videos. I've got a friend that sprayed can clear coat on her hood after a waxing she did that she didn't like how it came out. 🙄 how would you go about removing that? I have Gyeon tar remover, could I try that in place of Rapid remover? Would Rapid remover be effective on a layer of can clear coat? Is this a job I should go straight to compounding? Thanks for help.
@bobbobby1987
@bobbobby1987 4 жыл бұрын
When you use an aerosol can and you spray paint a base coat, usually you also apply a clear coat which would also overspray. So can't think of many situations where only paint would land on unintended surface, I would think both base coat and clear coat would land. So how would we get rid of that?
@franckraymond6245
@franckraymond6245 6 жыл бұрын
Bonjour,very intresting. Many solutions Given to remove overspray : thanks sir. Merci from Montauban FRANCE
@apexdetail85
@apexdetail85 6 жыл бұрын
Welcome to the channel Franck!!
@S197Bryan
@S197Bryan 4 жыл бұрын
Do you do this when it's completely dry? Or how long after spraying can I do it?
@h-townfishing1382
@h-townfishing1382 4 жыл бұрын
what grit should we use to get overspray off? mine sounded just like yours in that video.
@dwad9162
@dwad9162 2 жыл бұрын
So what do you recommend for a carbon fiber hood with sun damage ? I wet sanded it and added clear coat already but the over spray is baaaaad. Still looks better than what it was but I need to know what polish and what compound to use to get the overspray off best for carbon.
@steve-en8hm
@steve-en8hm 4 жыл бұрын
What would you use for house paint as bought a car with little white paints spots all over. It’s dried on. I did concourse for 4 years but haven’t come across paint spots like this. Any advise ? Thanks
@jj629ful
@jj629ful 4 жыл бұрын
Can you answer my comment please. I since I have a quick question anyways. Recently painted my truck with a cheap spray gun from harbor freight I used dupli color paint shop paint I put 2 coats of clear on it with dupli color same cans as the quarts of base coat I wondering if I can redo it with over spray on the paint job can I just spray over the over spray with the same clear or do I have to wet sand it off with a 1000 grit?
@jeffcarson424
@jeffcarson424 7 жыл бұрын
Brian, who sells the rapid remover? was also wondering how big of an air compressor you have. I think I'm about caught up on your videos. thanks
@thejoseandresshow
@thejoseandresshow 2 жыл бұрын
I have overspray all around the car. On every single inch. It's very small dots of white paint. It won't come off with alcohol, not even with a DA polisher using a Velvet pad from Car Pro paired with Meguiar's M100. Any help is appreciated. I have to take it off from the paint, taillights, headlights, trim, everything. Could you recommend using lacquer thinner or acetone in this case?
@jeffarnold4791
@jeffarnold4791 3 жыл бұрын
I’m also a full time detailer, what do you charge to do a complete wetsand then go back and buff and complete job, I don’t wanna undercut myself on prices, thanks
@codywade9687
@codywade9687 2 жыл бұрын
great video. I work at a metal finishing shop and my 2021black kia forte started getting rough on the hood, roof, and trunk. didnt seem to have this issue w my previous car. able to fix bcuz of ur video. ty
@NitZ83
@NitZ83 6 жыл бұрын
Not sure if I understood the grit using correctly for the wet sanding, can you tell me wich one you used ? Also I did a touch up on my front door and the clear coat is all blury, do you think this will help? thanks!
@apexdetail85
@apexdetail85 6 жыл бұрын
3000 to 5000 depending on the texture. Use 4000 grit on that area.
@rightsideoffreedom8004
@rightsideoffreedom8004 2 жыл бұрын
What is the best stuff to use for polishing for a Mustang GT? Car buffer??? How many times?
@LeoKahng
@LeoKahng 4 жыл бұрын
Really appreciate you posting this. The acetone test was a game changer for me as I had a lot of clear coat overspray and was able to fix it in minutes. I was in quite a time crunch and this saved me hours, thank you!
@CrimxSun
@CrimxSun 3 жыл бұрын
Does it damage the good paint underneath?
@LeoKahng
@LeoKahng 3 жыл бұрын
@@CrimxSun It does not, as long as the paint underneath is cured - like factory finish.
@brandonpacheco6125
@brandonpacheco6125 3 жыл бұрын
What about paintbiner???
@legioner9
@legioner9 Жыл бұрын
Will acetone remove clearcoat overspray if it is present for like 1 year?
@emjayy9527
@emjayy9527 11 ай бұрын
Did you try it on glass? Clear coat overspray unfortunately got on that too for me
@guillaumenicolas3814
@guillaumenicolas3814 Жыл бұрын
Hi Brian, Great video, thank you for that, will definitely try all those options on my end
@jasoncameron34
@jasoncameron34 6 жыл бұрын
Will the rapid remover take ceramic coatings off?
@juliotrokas2560
@juliotrokas2560 4 жыл бұрын
After applying rapid remover . Do you have to polish the paint?
@jeremiahlord6094
@jeremiahlord6094 2 жыл бұрын
I have overspray on a satin finish. Would the rapid remover alter the luster of the finish?
@maxfriedenberger8043
@maxfriedenberger8043 6 жыл бұрын
Brian do you have a video of fixing the clear coat when its starting to peel? What do you do in this case, beside an auto body shop?
@nelsonryan5786
@nelsonryan5786 4 жыл бұрын
at that point you gotta remove and re-apply
@baloo217
@baloo217 6 жыл бұрын
Nice videoo, i think you just save my life, or my car life. I was painting my step bars of my truck, i took them off, i paint the with herculiner, they look realy nice, but, it was windy, and all that black overspray went right to my white 2009 ram. Do you think acetone will kill the clear of my truck? Is it safe to use on car paint? I tried to buff it but didnt help to much. Please, need your help. I also have to clean my wifes honda odyssey. Thanks in advance
@apexdetail85
@apexdetail85 6 жыл бұрын
Try this first...www.4statetrucks.com/engine-parts/semi-truck-citrol-citrus-cleaner-industrial-degreaser_31822.asp?gclid=CjwKCAiAk4XUBRB5EiwAHBLUMVLTS5VLR79gj9jDX1xfyNDFAs-ZuzZBxNVH3BzLOIYZc5y-jAknrxoCNEoQAvD_BwE
@apexdetail85
@apexdetail85 6 жыл бұрын
Rinse area after using this or acetone... then the clear will be fine. Protect after with was or sealant.
@troynowak6744
@troynowak6744 5 жыл бұрын
So what happened to the paint u took off on the second one?
@Italianborn
@Italianborn 4 жыл бұрын
I got primer stain, I didn't seal properly and some primer went over the area interested..i was gonna try paint thinner but I'm afraid it could damage the paint
@MarkSegree
@MarkSegree 4 жыл бұрын
Please answer. Road paint splash on clear coat and plastic trims.
@Dopboyfreshh
@Dopboyfreshh 4 жыл бұрын
This is a perfect example of the different techniques to use, exactly what I was looking for, thank you señor 👍👍
@charlesdetailn8514
@charlesdetailn8514 7 жыл бұрын
Great video Brian!!! I'll give Rapid Remover a try next time. Great information as always
@apexdetail85
@apexdetail85 7 жыл бұрын
Its my personal got to for many things Carlos. Especially overspray. For some reason its not the easiest to purchase and not the cheapest. I hope that changes one day... if I can help it. Lol Hope all is well over there! Really good to hear from ya! 🤘🏻 Your probably getting hammered with work as well. Cheers!!
@jeffduphily8057
@jeffduphily8057 4 жыл бұрын
Rapid remover
@jakethestory-zh8bw
@jakethestory-zh8bw Жыл бұрын
A couple of quick questions: 1.) Is there only one type of Rapid Remover? 2.) Where can you buy it? 3.) Is it ok for windshields too?
@oesterbro8282
@oesterbro8282 5 жыл бұрын
Sos. Just bought a used car with cosmetics defaults on the paint. Aparently the previous car owner tried to fix the scratches on the car with cheap easy solution. He sprayed the scratches with spray paint. But it went wrong.. now it looks like an abstract painting on the car.. is there any tips to remove the stains?
@allendorn605
@allendorn605 Жыл бұрын
Hi, So I was wondering will this Rapid Remover work on removing Claer Coat overspray
@TeeBee1535
@TeeBee1535 4 жыл бұрын
ACETONE, I bought some at home depot and it stripped the paint of everything it touched plus highly flammable, i didnt use on my car tho
@Parminder963
@Parminder963 5 жыл бұрын
Is dual Action polisher ok than rotary ?
@jeffarnold4791
@jeffarnold4791 3 жыл бұрын
So acetone won’t damage any clear coats or paint?
@CrimxSun
@CrimxSun 3 жыл бұрын
Is acetone save for your good paint. Even on a older car??
@nicholassmith82
@nicholassmith82 5 жыл бұрын
Which method would you use to remove overspray from matte plastic window trim? There are tiny white specs, which leads me to believe that I'm dealing with latex paint. I feel like using even a lighter grade clay bar would be too aggressive.
@mr2_mike
@mr2_mike 4 жыл бұрын
Meguiars #39
@taranjotsingh1648
@taranjotsingh1648 2 жыл бұрын
Sir can oversprayed primer be removed using a clay bar ?
@amberkalet8139
@amberkalet8139 6 жыл бұрын
I painted my whole car and then cleared it all besides the roof because i had to fix something so about 45 min later i cleared my roof and pillars when i did that i oversprayed clear on my trunk and you can see it, will wet sanding take care of that?
@apexdetail85
@apexdetail85 6 жыл бұрын
Wet sanding is a last resort when all else fails... it will work every time. 3000 grit or higher
@jaylemmons3977
@jaylemmons3977 4 жыл бұрын
Wow.... Great information Vid... Learned so much in 7 min !!!!! New subscriber !!!
@LONLIBOI1993
@LONLIBOI1993 6 жыл бұрын
Do you reckon T cut would be able to get rid of overspray? would it be safe for me to use t cut on overspray.....
@apexdetail85
@apexdetail85 6 жыл бұрын
Tetrosyl could work depending on the over spray.
@rightsideoffreedom8004
@rightsideoffreedom8004 2 жыл бұрын
What do you use to get off clear coat overspray?
@shashikantchandanshive8577
@shashikantchandanshive8577 3 жыл бұрын
Hello sir I am from India. Just yesterday I had some repaint work on my cars front bumper from a local body workshop. After the work entire body is having a roughness feeling on touch. Makes sound if you wipe the surface with cloth. Maybe the guy didn't cover the body properly and is certainly overspray of paint, primer. Your video tells me that the wax polishing method will fix my problem. Please let me know what exact compound or wax to be used for polishing.
@truthurtzjc
@truthurtzjc 6 жыл бұрын
Great demo💪
@glenmcdan
@glenmcdan 6 жыл бұрын
Can you use it on bumper, chrome and other parts of car as well?
@apexdetail85
@apexdetail85 6 жыл бұрын
Which one?
@apexdetail85
@apexdetail85 6 жыл бұрын
Absolutely...Citrol 266 or Rapid Remover.
@MrBod4life
@MrBod4life 5 жыл бұрын
Great Video AGAIN! What are you thoughts on Citrol for this purpose? How does it compare to your Rapid Remover?
@BoostedEgo83
@BoostedEgo83 4 жыл бұрын
Im gonna try that rapid remover before wet sanding and buffing the whole car we left mine covered at the body shop and over spray got up under the plastic and it sounds just as bad as that fender when you run your hand over certain areas SMH, gonna try to get it off and polish the top sections of the car
@mozymi4399
@mozymi4399 4 жыл бұрын
Tried to fix a deep scratch, and all was well until I applied the clear coat which came out a matte finish as opposed to gloss. Any suggestions on a fix?
@hafeezm7995
@hafeezm7995 3 жыл бұрын
Hi there you have to options 1= wet sand the panel with P1500 or p2000 then buff it and that will solve the problem 2= Re do it Let me know if you struggle coz u mite be doing something wrong
@frankfrank9711
@frankfrank9711 2 жыл бұрын
Will this work for clear coat overspray?
@rjmidd2650
@rjmidd2650 6 жыл бұрын
What about removing spray paint from a carbon fiber body?
@abu-ali-aljehany
@abu-ali-aljehany 4 жыл бұрын
Is it ok to use car wax with a towel? The paint spots goes away with wet tissue but takes alot effort just to clean small area and half of my car is effected
@FerasSKayyali
@FerasSKayyali 3 жыл бұрын
جرب كلاي بار و بوليش. There is something called a cleaner wax. It has abrasives in it (polish). It might work.
@gigocool
@gigocool 6 жыл бұрын
will acetone damage clear coat? and what if my clear coat is oxidized and has over spray, do you still recommend this method?
@apexdetail85
@apexdetail85 6 жыл бұрын
No....Flushing the area is always recommended after harsh chemicals are introduced to clear coat. If there ids oxidation....wet sanding is needed.
@stephenswallow7654
@stephenswallow7654 4 жыл бұрын
Rapid remover where can I buy
@damagecontrol1049
@damagecontrol1049 7 жыл бұрын
great demonstration of various techniques
@apexdetail85
@apexdetail85 7 жыл бұрын
Thanks! A parade if them just came through the shop from a nearby road under construction. Penn Dot payed every penny of it. Kind of inspired me to put out a video for this problem. Hope it helps!
@jb0915
@jb0915 Жыл бұрын
If it's a paint overspray, clay bar will clean it. Mine was really bad. Do not do what he's doing. Idk why he's doing this, but you need to lube the clay bar a lot. Doing what he's doing will scratch and dull your paint
@Dr.Weaver87
@Dr.Weaver87 4 жыл бұрын
Great video, and it kind've answered my question. I just sanded, primer, basecoat on my car. I let it sit for a few days, and i put clear coat on today. everything was pretty close to perfect except my two quarter panels. It looks like cliffs and cracks developed out of the clear coat. Would these methods work? I guess i oversprayed that area..
@jeffcarson424
@jeffcarson424 7 жыл бұрын
thanks brian
@apexdetail85
@apexdetail85 7 жыл бұрын
Anytime at all Jeff! Enjoy your weekend! 🍻
@kevinhatton7255
@kevinhatton7255 2 жыл бұрын
You are a life saver
@jeffarnold4791
@jeffarnold4791 3 жыл бұрын
Where can I get the rapid remover?
@FerasSKayyali
@FerasSKayyali 3 жыл бұрын
Dear Brian, again and again thank you for the professional and educational videos! I have over spray on my self-healing ppf. Any ideas on how to tackle this? Thx again. Always a fan.
@lr3799
@lr3799 3 жыл бұрын
don't know if it's too late, but try Meguairs plastic polish. I had paint residues on my window tint (the side facing you in the car) and plastic polish took them off easily. Considering they are both plastic-based films might be worth a try (test a spot first of course).
@FerasSKayyali
@FerasSKayyali 3 жыл бұрын
@@lr3799 thank you! I worked on the outside surfaces using a claybar and a clay towel. I did not have any overspray on the interior. However, after a rigorous clean of the tint (3M crystalline) I noticed there are scratches and marrings on the tint (maybe from the rigorous cleaning, but I do not think it should be that sensitive) do you have any experience with that?
@lr3799
@lr3799 3 жыл бұрын
@@FerasSKayyali i would think it's the rigorous cleaning that you did that created the marring...could well be dirt that got picked up in the towel before you wiped down the tint. I use very soft microfibre towels and apply very light pressure using at least two fingertips to spread out the pressure even more, then ditch the microfibre towel as soon as it got any visible solids, to ensure it doesn't mar the surface. Been doing that for many years detailing inside and outside of a few cars i owned, never had any issue with marring or scratches on any surface. In contrast I did put in some fine scratches onto clear plastics by using clean, dry glass towels, so I would suggest wiping anything with at least moist towels unless you are removing/buffing wax.
@TheMfr426
@TheMfr426 2 жыл бұрын
Great video and I thought your shop sounded familiar. Turns out you about 1.5 miles away!
@gspeaking
@gspeaking 2 жыл бұрын
where do I get the rapid remover? No links.
@akilianonymous5427
@akilianonymous5427 3 жыл бұрын
I have some overspray from 2k clear glamor it’s been sitting for a few weeks any suggestions on getting that off?
@akilianonymous5427
@akilianonymous5427 2 жыл бұрын
Just letting everyone know wet sanding definitely worked for me
@MrGogetoutdoors
@MrGogetoutdoors Жыл бұрын
Hi any thoughts on removing line x bed liner over spray on rear quarter of clear coat small area ?
@MrGogetoutdoors
@MrGogetoutdoors Жыл бұрын
Installed a week and a half ago on a 2020 f150
@serv4ntPGR
@serv4ntPGR 6 жыл бұрын
Hi I have a 2k clear coat overspray on my hood. It's ClearCoat overspray on top of the ClearCoat and that overspray is now very rough and hazy.. I've tried goof off but it's no good. A autopbodyguy did it to my car.... Please help!
@superj7106
@superj7106 5 жыл бұрын
Wet sand. Polish. Amen.
@n11fk-series4
@n11fk-series4 6 жыл бұрын
I was wondering.....I was fixing a dent in my car and was on the last step of clearcoating the paint...and I got Clearcoat on my clearcoat.... and it feels grabby... is it ok if I wetsand 3000 on it and smooth it off?? then polish😧
@superj7106
@superj7106 5 жыл бұрын
yes. do it.
@jameshodgins2729
@jameshodgins2729 4 жыл бұрын
Would white spirit work?
@andrewstamps2806
@andrewstamps2806 4 жыл бұрын
Hi a brilliant video so thanyou very much from Andrew......UK 😊
@emmanuelromero5175
@emmanuelromero5175 Жыл бұрын
We're do u buy the quick remover
@rickilynnwolfe8357
@rickilynnwolfe8357 4 жыл бұрын
When I bought my 63' Chevy Nova there is black undercoating on the side chrome that runs down both sides of my car. Any tips would be appreciated on how to get it off with out damaging my chrome ? I tryed goofoff already and it didnt touch it..
@jdisdetermined
@jdisdetermined 4 жыл бұрын
Ouch, that stuff is super hard and sounds like its had plenty of time to cure. Have you tried something like metal wad polish, (can get Eagle One brand in a chrome can at local retailers) and a lot of time and patience? You could try small tests spots, of dabbing a microfiber towel with laquer thinner and gently rubbing the spots and see if they start to break down, I've used it to remove paint overspray from chrome.
@rickilynnwolfe8357
@rickilynnwolfe8357 4 жыл бұрын
@@jdisdetermined yes it is hard and thick gooey at the same time if that makes sence .When I sprayed it with the cleaner and let it sit it comes off in thick smears if Iam lucky and most spots are just hard .The under coating has been on there a few years I think . Thanks for the tips my friend this is going to be a slow long process I dont want to damage the chrome just wish there was an easier way ...
@jcjoo
@jcjoo 6 жыл бұрын
If using rapid remover to remove over spray, will it also remove the actual clear coating?
@apexdetail85
@apexdetail85 6 жыл бұрын
Clear Coat Safe JC....Nontheless...I always flush the area afterwards
@stephenswallow7654
@stephenswallow7654 4 жыл бұрын
What does mean remove from clear coat ?
@kingbuilds9173
@kingbuilds9173 4 жыл бұрын
Which do you recommended for fast removal on a lot of over spray
@1tmagda
@1tmagda 6 жыл бұрын
How about sandpaper in a can??????
@hurricanepowerwash
@hurricanepowerwash 6 жыл бұрын
I was painting my shed with a roller and got larger specs of solid colored stain on my nieces black Jeep. Its water based. Any Ideas? Are the larger spec easier to get off?
@apexdetail85
@apexdetail85 6 жыл бұрын
Citrol 266 good sir!....search.yahoo.com/search?fr=mcafee&type=D210US91088G0&p=citrol+266
@hurricanepowerwash
@hurricanepowerwash 6 жыл бұрын
Thanks!
@jamel472
@jamel472 6 жыл бұрын
good job
@thrty8street
@thrty8street 5 жыл бұрын
Where can I buy rapid remover? The sears link no longer works
@R3TR0R4V3
@R3TR0R4V3 5 жыл бұрын
I just found it on Amazon..it's about $30. It's vinyl wrap adhesive remover. Whodathunk?
@thrty8street
@thrty8street 5 жыл бұрын
@@R3TR0R4V3 can you post the link please?
@MenoProductions
@MenoProductions 5 жыл бұрын
My rapid remover just came in the mail and it did not remove the clear coat overspray
@stephenswallow7654
@stephenswallow7654 4 жыл бұрын
Meno G really ?!?! What did you find works best as I need to remove some overspray
@mikehoncho7216
@mikehoncho7216 4 жыл бұрын
I just use wd-40 and a magic eraser
@genysmenrunner1677
@genysmenrunner1677 6 жыл бұрын
Do you use the same method on plastic trim? Like bumper and wheel well molding
@apexdetail85
@apexdetail85 6 жыл бұрын
I use this for those areas....www.amazon.com/gp/search?ie=UTF8&tag=apexdetail-20&linkCode=ur2&linkId=7b747c10b5108b287fa974e298613161&camp=1789&creative=9325&index=automotive&keywords=Citrol%20266
@genysmenrunner1677
@genysmenrunner1677 6 жыл бұрын
Apex Detail It is citrol right?
@apexdetail85
@apexdetail85 6 жыл бұрын
Indeed.. try that first.
@genysmenrunner1677
@genysmenrunner1677 6 жыл бұрын
Apex Detail Thanks a lot!
@genysmenrunner1677
@genysmenrunner1677 6 жыл бұрын
Apex detail I can use a clay bar with citrol in those plastics? Or what tool is better?
@danielk0106
@danielk0106 4 жыл бұрын
My car is covered in paint overspray from another car that was close by when they painted it. Would rapid remover be safe no matter what it is?
@MrGogetoutdoors
@MrGogetoutdoors Жыл бұрын
Installed a week and a half ago on a 2020 f150
@mplscarsales6652
@mplscarsales6652 Жыл бұрын
Can this also remove clear coat over spray ?
@ui7183
@ui7183 9 ай бұрын
That's what the video is about and the reason this guy made it
@toddjenest3212
@toddjenest3212 2 жыл бұрын
But what if you have a large amount of overspray. Yours looks like just misting or something.
@RideAcrossTheRiver
@RideAcrossTheRiver 2 жыл бұрын
Acetone--really? That stuff dissolves paint like crazy!
@geopin7672
@geopin7672 4 жыл бұрын
Just use some fast reducer and done pro body tech refinisher
@mr.blanco6763
@mr.blanco6763 4 жыл бұрын
i see all these reviews and videos of people using turtle scratch remover , and simply spray and rub and wipe off ..
@keithjaffe6303
@keithjaffe6303 Жыл бұрын
Over spray on car paint
@joshuawithers5793
@joshuawithers5793 4 жыл бұрын
Thanks for the info. Steve Carell double anybody? Eh? Eh?😅
@theeekobreeelo1186
@theeekobreeelo1186 3 жыл бұрын
Volume too quiet
@christophermaldonado2259
@christophermaldonado2259 4 жыл бұрын
Dont know what over spray hes cleaning but I tried the exact same method for my over spray and didnt work save your time and money dont get this whack product
@MikeHatzilias
@MikeHatzilias 7 жыл бұрын
Tried Rapid Remover to remove deck sealer overspray on my Kia. Failed! Any suggestions?
@PGenz
@PGenz 6 жыл бұрын
Should I use rapid or citrol for paint overspray spectacles that flew on my car? And the citrol spray can is the one to use?
@apexdetail85
@apexdetail85 6 жыл бұрын
Flush whichever you use...both are very effective.
Huge Tips on How to Remove A Clearcoat Run / Paint Run
12:49
Tony's Refinishing
Рет қаралды 125 М.
How To Remove Overspray on Your Car...
9:22
Kandy Man
Рет қаралды 19 М.
DEFINITELY NOT HAPPENING ON MY WATCH! 😒
00:12
Laro Benz
Рет қаралды 18 МЛН
Always be more smart #shorts
00:32
Jin and Hattie
Рет қаралды 48 МЛН
Glasswool vs Rockwool Insulation I Know the Difference
2:30
Engineering Motive
Рет қаралды 59
DIY Over Spray Removal! Here Are Some Of The BEST Options!!
7:07
Apex Auto Detail
Рет қаралды 61 М.
Perfect blend every time with no blending solvent!
19:13
clearcoatsolutions
Рет қаралды 9 М.
The Easiest Way to Remove Paint to Bare Metal!
22:56
Paint Society
Рет қаралды 313 М.
Spraying CLEAR COAT: 4 keys you must know!
12:30
Garage Noise
Рет қаралды 141 М.
How to repair glass with Ceriglass
7:00
Josh G
Рет қаралды 2,3 М.
Paint Over Spray: beginners guide to removing paint over spray from car
20:32
HOW TO REMOVE PAINT OVERSPRAY ON A VEHICLE!  #Autobody  #Autobodytricks #detail #detailing
11:32
Auto Corrections Paint and Detail
Рет қаралды 38 М.
(WATCH !) easy clear coat removal with simple product !
13:48
McTaw RV Tips and Improvments
Рет қаралды 56 М.
berenang lagi #viral #shorts
0:12
Kakek Endo Family
Рет қаралды 45 МЛН
berenang lagi #viral #shorts
0:12
Kakek Endo Family
Рет қаралды 45 МЛН