To all the vets. Y'all are the best of us. Having said that, mere words cannot compare to where the rubber meets the road, your decision to step up and protect us. Thank you. Great job Steve! You've given me a possible solution to my paint problem. Thanks for spending the time to share.

Good video, but all you are removing is the protective film the factory installs on the front cap of the RV. That is not clear coat. Your clear coat is in good shape under the Diamond Shield paint protector. Just a tip … carefully use a heat gun, and the Diamond Shield will come off without any chemicals or mess. Less mess and not quite as much scraping. Thank you for your service, Sir! God bless! 😎🇺🇸

oorah Army dude! Thank you for this video. The clearcoat on my old 1997 Lexus is peeliing badly. Always proud of my brother Veterans, especially when they are doin well, enjoying the rewards of a blessed life. Mike Souza Navy MC Corpsman

Amazing job Steve! Thank you for your service! We appreciate all past and present military members and their families for their scrofice! I will look for follow up videos to see how the entire project went and see if you did a new clear coat.

Just what I was looking for to remove just the clear coat. USAF vet here! Thanks for your time and service! 👍👍

Thank you, i have a 2000 Ford F-150 and it has a fiberglass hood. Will give a try. Hope you get to make some great memories in the motorhome. Thanks again.

Happy Veteran's Day from a USCGC Acushnet vet 1969-1973. Great video; I wish that I would have known about this stuff 5 years ago. You have made my day; thanks a million.

Mr Mctaw, thank you for your service! And thanks for this tip, I’ve been sanding and trying various chemicals without luck. I will get to Ace and give this a try today. Happy Independence Day and thanks you for helping to keep us FREE!!

Thank you for your service to our Country 👍Clear coat is pretty much clear paint, going to try this

I thank you for your video and your service to our country!! I am so surprised you tried this in the first place. I would have been frightened to do it as it would be my luck to remove everything down to the metal!! Will this work do you think on a vehicle that is not fiberglass in the same way? I would sure like to see you get a hood from the junk yard and shoot another video showing how well it works on your motor home and then how it can work on an old junk car showing the results for us scaredy cats! Thank you again, I greatly appreciate you showing us this!!

Thanks so much!! I removed an old clear bra off a car, worked like a dream and didn't hurt the paint!!

Thank you! They should have named this product a different name.....can't say it either. Well if it works that's all that matters. Thank you and your son for the video. By the way, I love your wishing well. Do a video on building one just like it please!

Thank you for your service Army vet here. Thank you for the video my truck roof is peeling so I'm going to try this. God Bless you Brother.

Good job young man! Thank you for your service Steve!! Make sure you do some before and after shots and also a half & half shot of the RV clear coat removal. Can't wait to see it finished!😊👍🏽

You save the day and my having to get my golf cart repainted! Thankyou for your service!

Hi Steve , I tried the same product ( stripper ) however I didn’t get as fortunate as you , I believe your tip to ONLY leave ( citrus stripper)on a short time was wise from my prior experience with this stripper. I believe I will have to go a different route ( sand some then respray the base colour then more clear coat . Blessing Sir Timmy Llanes

Thanks for your service - I'm also a vet (US Navy 1963 -1966) Question - you mentioned high humidity - here in Kansas we are going through a long drought period, with occasional thunderstorms similar to type 1 hurricane. Does humidity affect the use of your method and/or the product you mentioned (Citrisstrip)? Submitted 7/20/23.

Whoa, that’s amazing. Will try. Thanks for taking the time!

Thank you so much for your Service and for showing how to fix this problem.

Thank you sir for your service, and God bless you and your family. Your tip for stripping clear coat is interesting 👍

US Navy (Ret.) here. Thanks for sharing this. I'll be trying it on my 2008 VW R32 project this evening.

Thank you for your service, sir. Awesome video and very helpful.

awesome thank you. im gonna run down to homey D right now and get some to try

Thank you for your SERVICE!

Is this the 3M clear wrap your removing or the actual paint clear coat? Great job, thanks for sharing!

Thanks. I will try this. The clear coat on my 2000 Ford Ranger is bubbling up & blistered looking. Thank you for your service to our country.

I need that because my DIY clear looked good 2 years ago. Now looks like a spider web. Thank you and more so for our country safe.

Thank you for your service sir!!👊

Thank you, I appreciate your video!

GRrrrreat Tip.... for the Navy .... I'll be trying that on my next project.

Excellent Steve !

Beautiful job. You the best. 😊😊

I love it Steve! I am looking to do mine as well. Darwin from Arkansas

Thank you for your military service but I must also recognize the service you provide of saving my marriage. My wife refused to ride in my car because the clear coat was so bad. Now problem solved and marriage saved. I was looking at thousands of dollars for a paint job, now we are a happy couple again.

Good job young man!

great job , big support and love

A woodworker, stripping paint from a table, used what looked like saran wrap to cover the stripper to keep it from drying out but he was removing several layers of paint.

Thank you sir. I wonder if I could get it in Australia? I want to fix the peeling clearcoat on my sons 07 Camry.

Thank you for your service sir

Mr. McTaw is that clear coat paint or PPF (Paint Protection Film)?

Retired, US Army (2007); this is good information right here.

thanks for your information

Nice job !

Transmission fluid works well. Especially when it's hot outside and sitting in sun

What was done after you showed how the product removed clear coat did you just wiped away the haze

Tilex Mold & Mildew will get rid of the black mildew. Spray it on, leave it in At least 15 mins. May need to do again. Works great.

I

4 pounds of C4 would be quicker.... LOL. Seriously, I am getting ready to clean the Clear Coat off a 2003 Taurus...and will definitely try this out. Thank you for your service...both in the Army and on Facebook!

Any thoughts on if Citristrip would be able to take off a sealer over acrylic paint or would it be too strong?

thank you for your service to our country

That isn't clear coat. All Holiday Ramblers, Monaco and Safari had 3M paint paint protection film applied to them. It's much better to use non marring scrapers or old credit or gift cards to remove the adhesive after you scrape off the film. The clean strip brand can affect your paint and clear coat under the film.

13:20. He finally gets to the point

What of u scrape without product?

Can it remove Oxidize on paint

I see it only affects oil based paints.

that might be a clear vinyl wrap as a rock guard

Gonna try this on my wheels

Thank you for watching ! Don"t forget to subscribe , Like , comment below and click notification bell.

Is that fiberglass gel coated or painted? Tñanks for your service sir. I had 8 years. Thanks for the information too.

What a awesome Job Mate just what I was looking for...appreciate the service from downunder here in Kalgoorlie Australia, My sons serving in the Army at the moment going on 2 years, God bless all who serve for our Freedom in this crazy world we live in!!

I don't think that is painted clear coat, it's a clear vinyl designed to protect paint against stone chips etc. They harden over time, get cracked and discolored. It won't likely have the same effect on automotive clear coat.

that's not clear coat it's a clear vinyl bra.. your clear coat is fine under that so it actually did it's job

Interesting,maybe removing it after 30 mins means that is b4 it has got to the paint underneath.

Would it be easier to use WD 40?

The label actually says paint & Varnish stripper.

green scotch pad, maybe

Great tip for stripping. Someone did a poor job of attempting to clear coat the front of that rv.

Do not listen to this mad man his words cost me $300 and a lot of headaches/wasted hours

Blah blah get to the point already.

Great video! Thank you for your service

Glad read the comments because it ain't clear coat it's a clear plastic film wrap for protecting from stone chip. Not 2k clear coat. Pitty he never corrected the mistake.

You are removing stone chip guard that’s there from the factory, I agree it’s horrendous I would do the same but you need to recoat it otherwise that piece will be weak

Thats looks like diamond shield, not clear coat. Very hard to remove. Thanks for the tip...

Thank you for the demonstration and more importantly thank you for your service 🫡