Oxygen Not Included - Critter Tutorial Bites

Oxygen Not Included - Critter Tutorial Bites - Dreckos

Рет қаралды 39,833

Күн бұрын

This tutorial bite for Oxygen Not Included looks at the useful Drecko and Glossy Drecko. I cover how to ranch them for their very useful reed fiber and plastic.
0:00 - Intro
0:23 - Dreckos around the map
0:31 - Drecko Morphs
0:52 - The Drecko
1:57 - The Glossy Drecko
2:20 - Drecko ranching
5:20 - Overflow design 1 - Critter Dropper
6:03 - Overflow design 2 - Partially submerged drop-off
6:39 - Solid shipping in the overflow areas
7:05 - Drecko ranches one take reference
7:10 - Sustainability and Outputs
8:24 - Outro
You can find me over at / gcfungus
Join the discord here: / discord
Support me on patreon: / gcfungus

Пікірлер: 56

@madrabidfish 11 ай бұрын

Another really important note that took me a long time to learn. Even if they look like they have their coats grown back you can't sear the Drekko until the "scale growth" that's listed on their bio tab is at %100 Which only grows while in hydrogen. Drekko ranch designs are really important and recommend looking some up for ideas.

@michaelrichards5340 10 ай бұрын

As a new player this used to confuse me

@emotiveewe8557 11 ай бұрын

Drecko, probably the second most op critter

@sieroskarazumijin9955 11 ай бұрын

Which is the most Op critter ?

@divaldosilva7789 11 ай бұрын

@@sieroskarazumijin9955 Shove Voles!

@cyberwarlord7363 11 ай бұрын

Unlimited dirt, fiber, meat,phosphorus, dam...

@ggcedicoes6599 11 ай бұрын

@@sieroskarazumijin9955to me is pips

@gamezone2996 7 ай бұрын

@@cyberwarlord7363 You forgot plastic

@TheDJroombaGaming 11 ай бұрын

A long time coming video. I haven’t even got the critter introductions and I love it. Thank you!! You builds help me progress in game and I can’t seem to do anything without your tutorials and help. ❤❤

@AsclepianCultist 11 ай бұрын

Dreckos get born at a toasty 62.5C, so they tend to slowly heat up an environment they get stored in. I like adding a thermo-aquatuner or thermo-regulator loop that can pull excess drecko heat from the glossy ranch to the default drecko ranch because balm lilies don't mind the higher temp.

@Sotanaht01 2 ай бұрын

Fortunately, they will maintain temperature automatically in a Balm Lilly ranch. You can completely vacuum-isolate the ranch and even with auto sweepers and the like occasionally adding heat, the ranch should never exceed 75 or drop below 35.

@ddwarful 11 ай бұрын

This is the bite I've been waiting months for

@theonus_4483 11 ай бұрын

Wow! I was just thinking last night I need a drecko ranching overview!

@mooniemoon12 11 ай бұрын

very nice tutorial!! you explain it so clearly it makes it super simple to understand, will be using these designs :D

@amcalde 10 ай бұрын

I have used the same design for my Glossy Drecko ranch forever, I was happily surprised to find some improvements in your design. Will be incorporating them. THANKS!

@samueloakley4254 2 ай бұрын

Mealwood takes 4 days to grow domesically, so 25% a cycle; while glossy dreckos eat 33% a cycle. You would need 11 (10.56) mealwood plants to fully feed an 8 drecko ranch. The design gets by because starving creatures throttle their metabolism, which doesn't effect scale growth but does effect eggs.

@Shareezz 11 ай бұрын

"evolves into meat" he says xD

@divaldosilva7789 11 ай бұрын

Damn! You guys are too smart! It amazes me how creative all the players are with this game!!!

@Morrneyo 9 ай бұрын

In my experience 8 glossy dreckos need 7 mealwoods to survive, but they sometimes bother players by starvation alarm (but actually that does not kill dreckos from starvation). 8 mealwoods surely feed glossy dreckos but mealwoods will overproduce useless lice.

@SIZModig 7 ай бұрын

Looks to me like wild planting Bristle Blossoms for a Glossy Drecko farm is the way to go then.

@cowboybeeboopbop 11 ай бұрын

Yeaaaaaaa this is what ive been waiting for!!!!

@NovaGirl8 11 ай бұрын

Most of my plastic at the moment are from glossy dreckos. Haven't even built a petroleum boiler

@danieltwardowski1100 3 ай бұрын

Any tip about how to warm up an ranch for the greckos on an icy asteroids? The only reliable heat sourse I have is the heater and a cool steam vent

@GCFungus 2 ай бұрын

I covered in the heating tutorial bite. The simplest way is a water loop that runs through a heating box with a liquid tepidizer in it.

@yellotoaster9368 7 ай бұрын

7:36 I have to ask since oni assistant is down, does this mean I can reliably suport 3 dupes per ranch? I want to support 10 dupes (with bbq) with 3 breeder ranches, 1 glossy 2 normal, 1 overflow room and 2 powered incubators.

@GCFungus 7 ай бұрын

Yes that should work given the numbers.

@drgold1999 14 күн бұрын

Doesn't the autosweeper not reach the far tile under the doors in the 1 design overflow room?

@Hanmacx 11 ай бұрын

Also Drecko has very high temperature So the mealwood might need cooling

@LumpekLagger 10 ай бұрын

Quick question, how to manage Heat coming from shearing station, especially in Glossy Dreco farming? I struggle with this for some time now.

@GCFungus 10 ай бұрын

To be honest with sustained heat output like that then some kind of cooling loop is really the only long term solution, either with liquid or gas. If you've got a loop for the base then you can probably extend it to glossy dreckos too.

@LumpekLagger 10 ай бұрын

@@GCFungus Thanks a lot!

@jkb8947 8 ай бұрын

Is the info about the 6 plants per drecko still correct after the patch? So far I always calculated 1 mealwood per glossy and 2 balm lilies per normal drecko.....that made planning difficult.

@GCFungus 8 ай бұрын

I believe 6 is still fine, the numbers have never properly matched the theoretical values so 6-8 should definitely be OK. There haven't been any recent patches that affected this.

@Bujintei 6 ай бұрын

Is it effective to use the 4 high ranch you've shown at 3:38 but with hydrogen instead of oxygen for repeated shearing? Or do the dreckos just chill near their food then in a chlorine atmosphere not regrowing their coat?

@GCFungus 6 ай бұрын

If you liquid locked it, made space for the shearing station and used atmo suits then yes that should also function the same as the other breeding ranch design.

@prebenhamers8153 7 ай бұрын

Where do you pump the gasses from? Do you use an oxidizer especially for the hydrogen in the room? I got SPOM setup but no spare hydrogen is produced here

@GCFungus 7 ай бұрын

It's usually easiest to simply take them from around the map, so caustic biomes usually have hydrogen and chlorine in them anyway. If you have a SPOM then I'd also suggest just taking some from the hydrogen line. You may not have any spare but if you took a couple of kilograms from there it shouldn't cause any huge problems and you may just have to cover a small power deficit for a cycle or so.

@fg5236 9 ай бұрын

in the game it says glossy dreckos eat 1 unit of mealwood a cycle, doesnt that mean that some of them would starve with this design? (6 mealwood), do u advise to maybe add 2 more plants (for a total of 8 plants) for glossy drecko ranch that is shown here? or despite what it says in the game, with only 6 plants, they are gonna be fine and grow and produce the same amount without dying or any penalties?

@GCFungus 9 ай бұрын

I have tested and found 6 to be fine. If you are finding some starvation then you could add more, but as long as the dreckos aren't starving excessively then it won't be an issue.

@RianAgusta69 11 ай бұрын

idk why but dracos hatch at really hot temp

@javicerverafrias7675 11 ай бұрын

missed the premier by a half hour man

@omarhasaballa7818 7 ай бұрын

How maby chlorine should i put there for it to not overflow and be enough? I mean as the quantity, I'm in my first ever world so I'm not used to this stuff

@GCFungus 7 ай бұрын

Enough to sit in the pit with the balm lillies. The exact amount depends on the rest of the gas pressure too, as the gases will fill the space to an equal pressure based on how much is in the room. As long as you get a bit of chlorine in the bottom it will sit there fine - just don't let carbon dioxide get in as it will push out the chlorine. To set the levels I would generally advise liquid locking the room, vacuuming it out with a gas pump, then use a gas vent to put in chlorine and hydrogen. You can use the disconnect tool to carefully control how much goes in, and just do it by eye.

@omarhasaballa7818 7 ай бұрын

@@GCFungus I've already created the vacuum, thanks for answering! I will count the pipes then and do a pipe X tile,Have a great day man!

@emotiveewe8557 11 ай бұрын

I think you forgot to mention how powerfull are dreckos with the critter flux-o-matic

@y-bk45nguyennhatduy61 8 ай бұрын

I have a question? How can I make the dup wear suit when they enter a room full of unbreathable gas?

@GCFungus 8 ай бұрын

The suit checkpoint stops dupes going past without a suit. Then you need suit docks for them to be able to use next to the checkpoint. Check out the exosuits Tutorial Bite for the full info.

@y-bk45nguyennhatduy61 8 ай бұрын

@@GCFungus thanks

@randowl404 7 ай бұрын

how does one get the oxygen to stay at the plants spot?

@GCFungus 7 ай бұрын

The easiest way is to use atmo suits and a liquid lock as then the gases never move. Otherwise you have to use the gas weights to make sure the hydrogen goes to the top and the oxygen or carbon dioxide below. If you've got an open system then you need to balance the pressures so the gases remain stable.