Result of broken timing belt.

Рет қаралды 94,488

8 жыл бұрын

*Want to own the tools I use ?? Click on the amazon link below to get my top 5 Tools I use*
Automotive Test Light- amzn.to/3z1Pdxa
Flexible Backprobe- amzn.to/3Pyr3zO
Multimeter- amzn.to/3PbuT23
OBD Scan Tool- amzn.to/3zaNWnq
Wire Piercing Probe- amzn.to/3OecWhT
In this video I show what happens to the valve when the timing belt breaks.
• What happens when timi...
Disclaimer:
Due to factors beyond the control of Oz Mechanics, I cannot guarantee against improper use or unauthorized modifications of this information. Oz Mechanics assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Oz Mechanics recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Oz Mechanics, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Oz Mechanics.

Пікірлер: 76

@OzMechanics Жыл бұрын

**Want to own the tools I use ?? Click on the amazon link below to get my top 5 Tools I use** Automotive Test Light- amzn.to/3z1Pdxa Flexible Backprobe- amzn.to/3Pyr3zO Multimeter- amzn.to/3PbuT23 OBD Scan Tool- amzn.to/3zaNWnq Wire Piercing Probe- amzn.to/3OecWhT

@William51115 3 жыл бұрын

My timing belt broke on my 2006 eclipse and I just finished putting a new one on to see if the valves are messed up, The car is running perfectly. No knocks, nothing leaking no smoke from the exhaust. I must be super lucky I guess.

@TomO-if7nh 6 жыл бұрын

Thank you for the video.

@SteveRobReviews 8 жыл бұрын

Ouch that's costly, just ran across this vid. Just subbed and look forward to seeing more. Cheers from Canada.

@LSRecordsMizo 7 жыл бұрын

Thanks alot...now I get how i messed up my Skoda octavia

@iftinchanneliftinchannel682 7 жыл бұрын

thank you so much your video is help full

@jangonzalez5627 6 жыл бұрын

I have a 2005 kia sedona 3.5 v6 when out of time whe i was reaplecing the harmonic balancer pulley came out the the timing sproker behind it so question i am going to have trouble put it back on time?

@snakebite1077 4 жыл бұрын

Can you put new values in on a 2005 chrysler 300 " with a 3.5

@Thehumbleguy 5 жыл бұрын

Does VW passat b5 1997 1.6l engine has valve clearance?

@anthonybaeza7226 5 жыл бұрын

What about on a lt1 how much to fix

@100sean1 3 жыл бұрын

My odyssey suv 2008 had gotten a broken timing belt. I got the new timing belt installed, but my nephew told me I need the valve set replace and head gasket too. What else would I need to do or get ?

@joes.7536 5 жыл бұрын

Just spent 9 hours doing a timing service on a b5 1.8t on Sunday. Ahh piece of mind now. The pulley on the tensioner was destroying itself cause wear on the edge of the belt and a squeaky noise after only 64k miles. Not a engine to skip a timing service on.

@snakebite1077 4 жыл бұрын

Is it fixable?

@ilirkrasniqi6758 3 жыл бұрын

Today I had broken cambelt during drive, in my Opel Astra G 2003 1.6 16v Does it do any other damage? Or just cambelt? Please answer?

@carloszaldana4436 5 жыл бұрын

The motor is a 2.5 ej25 Subaru

@smfhlmaoo6023 7 жыл бұрын

Ur video scared me but great advice but Question I have an 03 Gti 20th editions and while at a red light sitting there the belt snapped. What do u think of the chances I'm in deep shit or did I survive. Did not try to start it just got it towed and expensive euro place said u broke belt and need a head/motor. They said would cost me 4 grand I'm no sucker so it's sitting in drive way since March. What is ur opinion on this Vw......Lmk thanks

@OzMechanics 7 жыл бұрын

Smfh Lmaoo I think I have a video on how to test a head that had the belt break. Check it out

@carloszaldana4436 5 жыл бұрын

What about the Pistons nobody ever says anything about that can I fix the heads and put it back together

@crisr9226 3 жыл бұрын

Imma buy a TT and I’m just gonna buy a new cylinder head

@bilsob1 6 жыл бұрын

Does this also damage the pistons on a interference engine?

@Xixu.co.6 5 жыл бұрын

bilsob1 Not enough to cause any problems most of the time

@bobpress1235 3 жыл бұрын

not usually pistons are much more tolerant, valves will tweek first

@anonymike8280 2 жыл бұрын

Usually not.

@cvAero 3 жыл бұрын

To be cheap on a repair , can just the bent valves be replaced and then put head back on .

@kirbytabor9956 2 жыл бұрын

I put a timing belt back on, ran compression test and replaced all valves in 1&2 coz they were low, also lapped the valves just a little 👍

@BingermanAlley 6 жыл бұрын

Dont they usually break when the car starts since that is when the belt has the most tension on it?

@OzMechanics 6 жыл бұрын

Alley55 they can break whenever

@Esuper1 3 жыл бұрын

I am not gonna take the engine apart to figure out if the cylinders or valves are toast or have somebody else do it and charge me hundreds of doallars to fix it. In my case my belt broke on the road and it is an interference engine in my accord. I know how to change that which is not super easy but I can do it with minimal tools and the belt itself is like 25 bucks. The belt change worked and all is good. It's been like two weeks driving with no issues.

@screweduptx512 3 жыл бұрын

My Toyota tundra 2002 timing belt just tore.

@SamSam-us2fh 5 жыл бұрын

Hi man you are so great 👍🏻 I like your video but unfortunately late I watched your video, Kia 2004 I install wrong now Mechanic said all valve damage 😏

@OzMechanics 5 жыл бұрын

sorry to hear that

@SamSam-us2fh 5 жыл бұрын

Boss just to ask you, camshafts got pen that pen should be up same with I & E ? Or pen should be down only I and e up ?

@SamSam-us2fh 5 жыл бұрын

I mean when open camshaft poly there’s a pen . Kia spectra 1.6 model 2004 novus?

@botshelotanki1787 6 жыл бұрын

My car is VW New beetle 2000 model 2.0 , i packed for 10mins when I tried to start the engine it just cranked couldn't fire, the timing belt had peeled some grips, after replacing the belt the engine started but it was shaking and sounding like motor cycle,What could be the problem now

@dorianlavergne1685 6 жыл бұрын

Misfire. If you do a timing belt job you have to set the timing again

@bennygreene1421 3 жыл бұрын

If a vehicle has a turbocharger, thats a separate issue on whether its an interference or non interference engine. The turbocharger is altogether a separate mechanism.

@rustyshackleford1656 7 жыл бұрын

Timing belts are the dumbest design ever it needs to be a steel chain so it never wears out or just stick with pushrods

@Demon09-_- 7 жыл бұрын

Streetstockcamaro agree there lots of newer cars have been coming with chains Honda has had them since like 06+ on there civics

@sschaper84 7 жыл бұрын

Chains can break too....

@Demon09-_- 7 жыл бұрын

well anything can break i mean you could throw a rod. but chains are much less likely to break most chained cars go the whole life of the car with the same chain, but that can not be said for belts as age even without miles is very hard on rubber

@maverickwarren8627 6 жыл бұрын

Rusty Shackleford True...unless you have one of Ford's infamous 4.0 v6 sohc engines. They have not one, not two, but FOUR frickin timing chains!!! And they all have their own guides and tensioners! And to top it off, the guides are made of cheap wax plastic. This engine is extremely suseptable to timing failures if you don't change the oil often. The timing failures can range anywhere from 45k miles to 200k. The guy who designed this piece of shit should be flogged.

@mylescrumel9633 6 жыл бұрын

Chains rust

@0NeedHelp 7 жыл бұрын

how much does this usually cost to fix?

@OzMechanics 7 жыл бұрын

0NeedHelp just depends on what vehicle it is

@bobpress1235 3 жыл бұрын

couple thou

@omarsari4316 6 жыл бұрын

Good video Get hear cut ;-)

@raiderrichard7291 4 жыл бұрын

Does anyone know if a 3.0 honda v6 is a interference engine or not

@kttangos2871 4 жыл бұрын

Yes it is👍

@sandrapanico6357 7 жыл бұрын

It's a good thing my mechanic keeps track of my car and we changed out my water pump and timing belt at the same time prior to the first sixty thousand miles for safety reasons. I know exactly when it needs to be routinely serviced so I can avoid a mess down the road. But I'm curious, can the timing belt break before it's scheduled maintenance?

@OzMechanics 7 жыл бұрын

Sandra Panico I've seen some break. Most likely defective part

@sandrapanico6357 7 жыл бұрын

Oz Mechanics Thanks for the feedback. I have a 2005 Hyundai Tucson who's record is clean of major repairs. I hope I'm doing the right thing by practicing early preventive maintenance on my vehicle. SUV tires are expensive enough so I'm hoping to prevent costly repairs.

@OzMechanics 7 жыл бұрын

It's always good to make sure all your parts are changed before the break down on the middle of the road

@stoyannikolov1017 7 жыл бұрын

Yeah, but not only age of components is the one thing to consider. For example i had a brand new Continental timing belt replaced and it just snap after 3000 kilometers... My last was like 60 000 km and 2 and a half years old and was doing just fine, but to be safe i put a new one and now my car is at the mechanic :(

@OzMechanics 7 жыл бұрын

Stoyan Nikolov yea I once put a cheap timing belt on and it lasted 8 months at most. Just best to buy a good quality belt

@xdrfox 4 жыл бұрын

the faster you are going the more damage

@nunyabidniz2868 3 жыл бұрын

This is why timing belts only belong on engines that come with their own pit crew... or else are free spin designs. Gears or chains on an interference engine ftw!

@anonymike8280 2 жыл бұрын

Depends on the engine, but generally if the job is done properly, you will not have problems. I'm watching this video because I have a problem resulting from bad work done when the previous owner had the vehicle. Fortunately, it's a non-interference engine. Someone made a mess of it by not tightening bolts to the their proper torques. Leaky water pump gasket. (undertorque). Broken bolt on the idler pulley (either over or under, I'll never know which). Crankshaft bolt probably overtorqued. It's a mess. I knew the water pump was leaking a little. If I'd gone into it sooner, maybe I would have retorqued the idler and tensioner and I wouldn't be off the road right now.

@krazyeye420 3 жыл бұрын

Belt broke 237k Hyundai sante fe 6cld Not spending $600 for a change with a water pump to find out my valves are bent on a interference engine. The fact that my mechanic for over 20 years didn't inform me of the interference issue makes him null and void. Peace

@extremesquash6024 5 жыл бұрын

2 stroke Detroit Diesel is the way of the future

@ThePracticalMechanic Жыл бұрын

OZ!!!!!!!!!! you click baiter!!! you show a thumbnail of a 20 valve audi/VW motor. 😂

@OzMechanics Жыл бұрын

Buahahahahaha at least I didn’t put RIP Oz last video. Lol

@ThePracticalMechanic Жыл бұрын

@@OzMechanics at least once a month

@OzMechanics 2 жыл бұрын

If you feel like this video helped out, feel free to support the channel by donating. Just one click away on the link below, to help support the channel :) www.paypal.me/ozmechanics