That pipe bending skill is next level!

Glad the videos are back, found them helpful for the last couple years. 2nd year apprentice plumber 👍🏻

I’m always an apprentice, always learning something new from your vids. Keep up the good work 👍

I’m training, really love your videos, find them so helpful. Thanks, keep up the amazing work.

Just finished 25 years in the Army and currently completing my portfolio for my ACS , would love to be in the draw for the torch, keep up the vids , love watching them 👌

Great video again Pete keep them up I love the fault finding you do it so much easier than I would saves loads of time scratching your head

Im a level 3 apprentice gas engineer, in my second year, just getting together my tool bag now! One of these would be a great addition to my velocity pb bag!🙏🏼 Love your videos!

Lovely work PB. I fit quite a few Vaillants and have found the new front accessible filters to be a God send in situations like this. Great video, stay safe! 👌

Great video Pete love the boiler job, great boiler also. Crazy how I even watch the toilet job which are bread and butter but the way you explain things just gets me locked in and wanting to listen

Absolutely love this channel great to have you back PB 😎😎

Another cracking video mate. Loved the full combi change it gives some good insight 👍

Been following you on Instagram for a while now but only recently been watching on KZfaq love the videos I think what you’re doing for all apprentices and even some qualified blokes passing on your knowledge and tips is brilliant as I’m a 4th year heating and ventilation apprentice from Ipswich so I’m more commercial but the tips and knowledge are still always helpful

hey hey, I am 22 years old from canada! just finished my last exam and finished all my schooling and hours in my apprenticeship just booked my license test ! those lights look stellar, I would love to get my hands on one. keep up the great work, love the videos

I liked the installation of ecotech.. greetings from the netherlands thanks for the time you put in the video. And i liked the pipe bending.. in the tight space...amazing.

Hi great video keep up the content. I'm a apprentice definitely learnt a lot from your work. Always trying to better my work. I am glad you started doing videos again.

Thanks pb, another cracking video, nice to see you taking a trainee under your belt, after just completing the acs myself, the hardest part was to find someone gas safe registered to tag along with, I must have phoned every plumber/engineer in the area,luckily dropped on a guy who needed a driver, so it worked out well for both of us.

Keep up the great work, as always learn so many tips from your videos

I’m an apprentice level3 and I’ve learned a lot from watching your videos 👍🏼👊🏻

Very Informative video clips with a good sense of humour. Liked it. 👍 Not to miss the pipe bending, really good.

Great videos as always PB, As an Apprentice you're videos really help. The way you explain and go through your jobs makes it look easy! Plus would love one of those light 👍😅

Excellent work i thought I could bend pipe, but you are the master thanks for the video,I also cannot get over how complicated setting up a boiler is today, compared to what we used to do with a floor-standing Potterton 35 years ago,Ps not to thrilled with you new trainee on the phone all day,My boss would have sacked him there and then on the spot,

Glad you back in KZfaq!) Watching your videos few times)

Another Sunday made better with another excellent vid. Keep it up PB!

Another classy one, thanks PB!

Another great video Pete, thank you for the great content keep it up( apprentice here)

Got my first exams starting next Monday. About to start a new career. Learning a lot from your vids. Cheers.

The bend was ridiculous lad! Loving the videos

That magnet tip is brilliant!! Love the vids as always mate

I’m an level 3 apprentice love watching your videos 🤙🏽

Hi PB, I’m a trainee renewable engineer. The inspection lamp would be a nice addition to my tool bag. Keep up the vids , excellent learning material.

Doing my ACS portfolio now, hopefully will get it done in a month or so Nice channel, keep up the good work

Another great vid, look forward to seeing them on Sundays take care and stay safe. 👍

Apprentice but in my 40's retraining and loving it, I would like to be considered. Love the videos keep it up..

I'm an apprentice, torch would be a good addition to my tool bag. Great videos 👍

Keep the videos coming! I’m now going into my 3rd year apprenticeship, so a unilite would be a perfect addition to the tool bag.

Love your videos mate you explain it so well

I’m an up and coming plumber/gas engineer that’s trying to improve my new set of tools and one of these lights would come in very handy! Been loving the vids keep it up taking notes of your tips and tricks for when I go out on my own.

Learnt alot watching this video! Thanks alot

Level 3 apprentice here 😁 love the videos as always. Really helpful as always need the revision I can get especially whilst watching the siphon part 🤙

That light would be really handy for everyday jobs! Keep up the good content

The 3 people who disliked the video are jealous of your skill!! Awesome video this sunday please keep them up 🙏

Hey pb started my gas apprenticeship this year and slowing getting a gas maintenance/service bag together this would be great addition to the bag. always informative videos. Great Chanel

Great having you back. Always learning and love the I f*cked up 👍

Glad your back mate. Honestly learn so much!!

Sweet videos been watching a good while now I find them very informative I really do take a lot from them I've been plumbing for about 18 years but always struggled with confidence these videos are helping me restore it. those uni lites look the dogs ding dongs 👍 I could also do with a pb plumbing bag 👌

Great video and i like you encourage apprentices giving them tools! I miss would rather wednesday 🤣🤣🤣

Hi PB. Another great video. I love them thank you. I am a apprentice

Great video Pete full of handy tips and tricks, I am an apprentice

Top video again mate been looking Forward to it.im learning everytime i watch your videos.the underfloor heating clip was good it was something i didnt know and havent been tought as yet.

Great video PB content always useful 👍🏻

Fab workmanship as usual.

That pipe bending is on another level 👌🏼. I personally think the boiler install was very good considering what you had to work with.

Great vid as always, the unilite torches would be handy I get sent to the van to find a fitting / tool in the dark! Definitely better than a phone flashlight 👍

Class video PB learn so much, just about finished my apprenticeship, hopefully start doing jobs on the side soon 👍

apprentice here, class video as per👏🏻

I’m an apprentice! Would love one of then lights! Keep the videos coming too. Their so helpful!

Brilliant content, great online tutorials - I’m an apprentice doing C&G level 2 and I’d love one of those lights as part of my kit 👍🏻👍🏻

Bloody great video PB

Another great video mate. I am an apprentice, would love the wee touches as I am always the one that goes under to floor 🤣 one time I went under a house and my journey man operated the blow off from the cylinder and soaked underneath the whole house, was brilliant as I had to install new central heating flow and return pipes and also a new blow off that actually went outside 🤣🤣

Hello PB I’m a final year about to take my gas exam these unilites would be an amazing start to my boiler career

Hi PB, I'm an apprentice plumber and I don't have a flash light yet as I'm not fully equipped but this would help loads, live the vids and I look forward to them every week

Another great video to learn from. Looking forward to the next one. Those torches look brilliant, from an apprentice gas engineer about to sit his ACS 😳😬

Keith.... legend 🤣 Great video chap 🤘

Genuinely look forward to this every Sunday PB keep em coming. Top bloke 👍🙏🍺

Hey I'm a second year apprentice. Those lights look amazing! Cheers. Keep up the good work

I'm a heating engineer apprentice, love your videos, a light would help loads , thanks

Good video, the pipe work that you done was class, also good tip on finding a leak didn't know u could do that.👍

Hi PB, your videos are great! and thanks for taking the time to make them, much appreciated! You have actually inspired me to get into plumbing and heating again, I've been out of this game since 2010 when my CORGI reg expired. Just got to renew my ACS gas now, any tips, advice and wisdom you can give me to start up again will be greatly received! kind regards.

Pipe bending next level man, nice clean solder joints. I had a hep fitting do the same a few years back, no inhibitor meant the metal grip rusted away.

Mate Your pipe bending skills absolutely unbelievable I am loving every videos you upload I really wanted to come down and meet you one day Thanks so much

Hi I’m an level 2 apprentice plumber. I would like the lights as would help me a lot. I always watch your videos they help me so much. Even when I’m at jobs I will look up your pipe bending tutorials. Thanks pb

grate video again , apprentice plumber. thanks

Great vid. I’m an apprentice. Loving the trade life.

Im impressed on how much you can do with just one hand

I'm an apprentice and would be really grateful at a chance for some good lights. Great video mate keep them coming 👍👍

Great video! Currently on my managed learning program working towards my Acs the uni light would be great towards my kit Good luck everyone 👍🏼👍🏼

Apprentice here 👍. Great Vids as always.

That video was the reason why i ordered the il -175r i love it.

Hi Pete, I'm an apprentice doing my gas qualification at the moment love the video. The torches would be very helpful for doing my servicing work. Keep the vids coming 👌💪

Another great vid. learning a lot for your vids

Your pipe bending skills are just amazing :-)

Lights look mega ! Would be a banging addition to the bag 🛠

G'day from Australia. I'm a fridgy,mate good videos keep them coming 👍

Truly you are Master pipe Bender 👍🏼🙂💯

Your bending is something else, amazing. Now I’ve complimented your bending may I be considered for the uni light give away. My torch is crap 😂😂 Apprentice working towards my level 3

Really informative video as usual PB, Just started my apprenticeship and would love to add unilite to growing kit bag

Nice one PB.....top man 👍

Hey PB great video. I am an apprentice and would love a unilite. Keep up the good work👏

Coming into my 3rd year of my apprenticeship. Those lights would be very handy!

Your mention about keeping screws reminded me of something my old boss did. He'd always keep PCBs from old boilers. Get someone out of a hole until a new one could be purchased (unless they wanted to rip out and replace whole thing).

Top class work, pleasure to watch.

The midweek one is a bit of a tough one. Still working till late and don't always want to sit down and watch tv or youtube. The weekend is different and I'm relaxing and am more open to opening youtube or tv. Just food for thought. Love the vids mate have helped loads.

I’m an apprentice,Those lights would be so useful love the videos

Another top video Pete! Apprentice myself and the lights would be very helpful!

I am apprentice working with a plumber/gas engineer and starting to learn more about boiler servicing/fault finding and would love my own unilite !

The work carried out here is unreal. 👏🏼👏🏼 enter me in for the draw. I do love a light 😂

The beginning was amazing!! 😂😂😂

I’m an apprentice and one of them lights would be a great addition to my growing tool bag.

👌nice install and video, bending skills are level 1000

Excellent video it's a lot to learn from you I am new gas safe