P B Plumber The life of a jobbing plumber

Рет қаралды 20,583

Жыл бұрын

TRADIFY free trial 👉🏽 bit.ly/3hL474s
POWERTOOLMATE 👉🏽 www.powertoolmate.co.uk/deals...
Velocity pro gear 👉🏽 www.velocity-progear.com
Toolmonster use PBPLUMBER 👉🏽 toolmonster.store/?ref=0cJJTWkX
If you like my videos and want to help me make more, you can Join my channel here 👇🏼
/ @pbplumber

Пікірлер: 77

@adegriff1843 Жыл бұрын

Great job boys. Nice to see the different work. Have a great Christmas Pete and a happy new year.

@richardbinnie Жыл бұрын

Really enjoyed this video showing that plumbing can be very challenging and far from glamorous. Great work.

@train4905 Жыл бұрын

Happy christmas and all the best for the New year sir,as allways,brilliant work

@MrVacuumCleaner Жыл бұрын

Another great video - you both are true experts. There are many plumbers on KZfaq but over not seen any that will accept the challenges you do and deliver to such a great standard. It’s an interesting setup - I assume the well was the original supply before the need to mains water in for drinking - interesting to know how the are managing that control in the toilets and cafe.

@Smart_fix Жыл бұрын

Great forwarding job Peter well done 👍🏼 ❤😊

@theforkieman Жыл бұрын

Great job. Heath and safety were on holiday that day lol. Enjoyed as always. And Happy Christmas to you and a Happy New Year to all involved in this channel. Keep well 👍👍

@joeison1855 Жыл бұрын

another good video pete keep it up, 2022 is gonna be a good year for you i can see it

@stephencarter6634 Жыл бұрын

Great video 👍 Merry Christmas and a Happy New Year 🎉

@Carl-re6zb Жыл бұрын

Thanks guys... Really interesting upload

@DavidSmith-bd1ct Жыл бұрын

Yes please Pete, I'm interested in a cold plunge video, health benefits etc you've noticed. Happy Christmas 🎄

@copperskills3973 Жыл бұрын

That will leak in the future as the foam compresses. You’ve drilled the wrong end by the look of it. Those tanks have drilling points where there is no insulation

@stuartbromley3513 Жыл бұрын

No, it'll be fine. There is no continuous force to compress the foam.

@copperskills3973 Жыл бұрын

@@stuartbromley3513 temperature fluctuations will do it 👍🏻.

@garyredfern5303 Жыл бұрын

Great video mate. Have a good one 🍻🍻

@scottpeters8142 Жыл бұрын

Great video mate, would be good to see one about cold plunges/ your routine etc 👍

@mynameis9739 Жыл бұрын

Yes PB exactly what’s required for a Sunday

@thfc4745 Жыл бұрын

Happy Christmas PB

@sergiofernandez3725 Жыл бұрын

Nice content. I do enjoy something different. Those Unilite gloves look good.

@glenstagg527 Жыл бұрын

Hi Pete another interesting video. Would love to see a video on the new Renault van tour. Keep up the the great YT channel. 👍

@abidh4253 Жыл бұрын

Hi pb love your videos mate

@onefortheroad1 Жыл бұрын

Looking forward to the Renault video Pete 👍

@markcostello2734 Жыл бұрын

Red top in a field with a bull ? That marathon training might have come in useful 😂 Thanks for the videos this year 👍 Have a great Xmas see you in 2023

@mcfly10146 Жыл бұрын

yes interested in cold plunge content 👍

@paulhughes8724 Жыл бұрын

Yeah my New Year aim is to stop eating as many Marathons 💡💪

@philanthropist1241 Жыл бұрын

My question was answered at the end of the video 👍

@BLOCKsignallingUK Жыл бұрын

It looks like there may be an insulation free section for the outlet all along the short side under the inlet. You can see a step in the insulation at 32:03 on the back side as well.

@PBPlumber Жыл бұрын

i saw there was a step, but why would the whole of that end be uninsulated, and also it would mean outlet directly below inlet allowing the water at the opposite side to become stagnant?

@BLOCKsignallingUK Жыл бұрын

@@PBPlumber I think the base would be fitted 180 degrees from how it is fitted. I guess they think the oulet pipe might be the most difficult to relocate when replacing a tank.

@chrisholt2474 Жыл бұрын

Great films part one and two an interesting job, have a great Christmas and New year. 🥶👍👍

@lukestewart9489 Жыл бұрын

Where did you get that jumper I love it

@philanthropist1241 Жыл бұрын

Hi Guys, Would you have had room to install 2 smaller tanks side by side? Just asking 🤔 have a good Christmas

@henryeadie7972 Жыл бұрын

No need for a tundish or something on the overflow so you can see its flowing?

@andyleggatt1846 Жыл бұрын

Ill preface this with I don’t know plumbing by trade, but bits from a healthcare environment. Should the bypass have a second isolation and drain for when not in use? Just seems like a bit of a leg to have standing water for long periods of time. Happy to be corrected 👌

@iheggis86 Жыл бұрын

It’s only feeding cisterns in farm shop & bnb from what I remember on previous vid

@cliveramsbotty6077 Жыл бұрын

i've seen some terrifying things in healthcare environments far beyond this, but you are on the right track with this. as already mentioned it's for watering plants and toilet flushing. it's from a well so no risk of backflow to mains. glen knows what he's doing.

@sdgelectronics Жыл бұрын

The bottom half of the tank was the wrong way around. The opposite side to where the outlet was drilled doesn't have the insulation at the bottom, so that's the section to put the outlet.

@Ray.m0 Жыл бұрын

Watch till the end

@sdgelectronics Жыл бұрын

@@Ray.m0 I did, what are you referring to?

@dennisphoenix1 Жыл бұрын

@@sdgelectronics I realised that it was assembled wrongly too. The non insulated bottom section was back to front . Oops

@lyndamcardle4123 Жыл бұрын

That tractor's actually called a telehandler Pete !

@markrainford1219 Жыл бұрын

Or a teleporter as I can't help calling them. 😂

@lyndamcardle4123 Жыл бұрын

Mark.....actually, you're not wide of the mark here....either description is a portmanteau word and your tele(scopic) porter (handler) is as good as the telehandler !

@Isicobez Жыл бұрын

Have you not go that bottom half the wrong way round? . Looks like there is no foam on the left hand side ( at 17.17) compared to the right hand side. You can see what I mean at 34.39 as well

@sdgelectronics Жыл бұрын

Yes, you're right

@tokomac7728 7 ай бұрын

building regulations stating overlapping base of tank must be minimum 150mm around plus made from minimum 19mm play wood 👍☝️

@markrainford1219 Жыл бұрын

"Homemade ghosts" is that what they are calling them these days? 😂

@TheFoolishboy9 Жыл бұрын

It's raining in Barrow as well. Had 3 leaks at the Morrings pub, with the pipes thawing out.

@loafersheffield Жыл бұрын

Not the beer pipes I hope?

@TheFoolishboy9 Жыл бұрын

@@loafersheffield Outside taps, not lagged

@loafersheffield Жыл бұрын

@@TheFoolishboy9 No seasonal/winter isolation valves fitted. Not like it would have mattered anyway. In my experience, even if you fit them and tell them to turn the inside isos off and open the taps when winter approaches, they'll just forget. Hey ho, ho ho! have a nice Chrimbo!

@TheFoolishboy9 Жыл бұрын

was supposed to be turned off, but camper van stayed the night and was turned back on

@scotsdunc Жыл бұрын

nice wee job, just a pity had to be done at this time of year

@dennisphoenix1 Жыл бұрын

What happened to your van Pete ?? Did you get it fixed ??

@dennisphoenix1 Жыл бұрын

The indentation you are looking for is across the whole end of the cistern and partially round the backside .

@PBPlumber Жыл бұрын

would you put your outlet directly below your inlet and allow for the water at the opposite end to become stagnant? i’m sure i learned that in college

@dennisphoenix1 Жыл бұрын

@@PBPlumber no I wouldn't. It's not just for stagnation it's also to stop aeration in the outlet when the water level is low in the cistern and the incoming water is dropping into the cistern . We all make mistakes I will admit that . Its unfortunate that because you post videos on you tube the world watches and criticises . I am a fan of your work and know you take pride in what you do on sites and visiting colleges etc . Dont take it to heart . I would have probably made the same mistake. It's a school day every day.

@harryrattray6411 Жыл бұрын

@@PBPlumber you could’ve flipped the bottom of the tank round so the part with no insulation was at the opposite end of the inlet then you wouldn’t of had to drill through the insulation

@Tom-hl7wc Жыл бұрын

@@harryrattray6411 yeah it actually came in the correct orientation off the pallet. Must have gotten turned around.

@benfrost8697 Жыл бұрын

did the bottom of the tank have an insulated layer?

@benfrost8697 Жыл бұрын

Nice job though guys. Really appreciate your effort for the videos. Much love keep it up an watch you again in 2023

@jayc1140 Жыл бұрын

Had to slip in that he had XL gloves on compared to his pal😂

@patrickoregan7102 Жыл бұрын

Great video Pete. Very interested in health vid about cold water therapy. I suppose you've seen whim hoffs stuff about it all 😂

@sonnyforte2374 Жыл бұрын

Just curious, do you not have any kids? Or a missus, only asking as I’d love to be able to clean my van out every Sunday! All the best

@nickhickson8738 Жыл бұрын

What an odd tank design where the water level lies above that two part seal if that's what happens. Surely it's asking a lot of that to remain watertight over time.

@dennisphoenix1 Жыл бұрын

Lots of big cisterns come in sections and are bolted together, including the sides . As long as the seal is done correctly it won't leak .

@SuperWayneyb Жыл бұрын

🤘😎🤘

@Tom-hl7wc Жыл бұрын

I said it in the last video but I’ll say it again. You’ve glued PVC and ABS pipe and fittings together. You might get away with it but you shouldn’t do it. You have to use different glue on ABS and PVC. Also you’ve voided the warranty on that tank.