Thanks!

Thanks!

Thanks Tom!

Thanks Mike!

rain boots totes work well

Ain’t that the truth.

I had a meter in my tools originally, then decided there wasn’t much need for it. It doesn’t weigh much or take up much room, I may add it back in.

The carriers are actually narrower than the overall width of the truck. They’re pretty easy to take off, so they aren’t on there until Wednesday.

Thanks!

😄 Thanks!

Thanks!

@@WanderingYooper awesome. He was a nice fella. Thanks for joining and following along.

@@WanderingYooper What was his TikTok again?

Thanks! Great suggestions, I’ll add both.

Thanks Don!

Hopefully, I’ve got any flats covered. Rampsides are awesome!

I live on a lake and don’t fish…..🤣🤣🤣🤣 I think we’ve all seen the Alaska trip. It’s inspired a lot of these small bike adventures.

Hey Kirrbby! I think I did mention a roll of paper towels. I didn’t mention it, but we’ll have a bunch of ratchet straps on one of the other bikes. The ferry recommended bringing straps to tie the bikes down, while crossing Lake Michigan. We got black electrical tape for covering any wounds along the way. 🤣

I’ll attempt to do as many updates as possible.

The bag with sockets also includes a racket and extension.

Thanks for the feedback. Unfortunately, I don’t see your suggestions making more than a few pounds of difference. I can swap a complete carb in a fraction of the time of replacing parts. I’d rather have 10 extra pounds and make the repairs considerably easier. Honestly, I built the bikes, we won’t need any of this stuff. But, if we do, it makes for good video content, doing roadside repairs. Thanks!

Did not know. That could be a blast to roll thru as we’re leaving the U.P. Thanks for sharing!

@kurtd8396 Are you from St Ignace area? Any recommendations for a local breakfast place?

@MiniBikeMike I'm not a local, unfortunately. I can't make a suggestion.

I’m pretty sure that’s on our route. My wife and I were just in that area a few weeks back. Stopped at Point Betsie lighthouse. Send me an email with a phone number and I’ll text you, if we’re in the area. My email is: ct70help@gmail.com

Thanks. Yep, got plenty of pain meds in the first aid kit. 👍🏻

Got it. Just put them in the box. Thanks!!

Plugs were mentioned in the video, in bag with other electrical. I’ve never worn a pair of rubber gloves, not sure why I’d need them. The bikes have been completely torn apart and rebuilt, shouldn’t be anything that needs WD40. I didn’t mention straps, but we have them on another bike. They’re needed for securing bikes on ferry. I’ve never used butt connectors, I can just twist/tape wires. I have multiple pliers, should be good. I don’t use hose clamps, but I do have wire, to twist into a clamp, if needed. I’m really hoping we don’t need any of the stuff I’ve packed….we’ll see how it goes! Thanks for watching and commenting!

I originally had a meter packed and took it out as I was laying the items on my table. Other than swapping out a burned out bulb, once we get rolling, I’m not going to worry to much about electrical. It doesn’t weigh much, I may throw it back in. I have no idea what route we’re taking. 🤣

@@MiniBikeMike Safe Travels!

@indianachrisUDX1313 Thank You!

@@MiniBikeMike You're welcome!

Bikes and boxes are all outfitted with AirTag GPS trackers.

We’ll have helmets and riding gear on 90% of the time, but that’s a good one, I’ll get some added. Thanks.

Ya, I learned this one the hard way, even the small window in my gloves burned a spot on my hand.

If it were just me, I wouldn’t be carrying anything. But, I’m retired and have no schedule. The other 3 have to be back at work on Monday, so I gotta make sure they get there. 😄

Thanks Mic!

@@MOUNTAINMANRC-MOTO There are lots of videos on each bike, leading up to the ride. I believe the installation of the Packout on this bike, is in this video: kzfaq.info/get/bejne/hNx9drOd0bK9c4E.htmlsi=Un1BowJDfnKDoUmd

A few subscribers that are along the route have reached out and may join us for a few miles, at different points.

Ratchet and extension were in bag with sockets, just couldn’t see them. 👍🏻

I wish I could answer some of these questions. Haha. My son is the GoPro guy, he’s handling the setup of everything. But, I will pass along your suggestions to him, Thanks!

@@MiniBikeMike let him know that he won't need anything higher than 60fps and 4k will be a lot, may be able to get away with 1080p. 1080p 60fps is what my ChopT70 video was filmed with BTW

I’m definitely prepared to buy a pickup along the way, if needed to haul our butts back to Muskegon. 🤣🤣🤣

Email: ct70help@gmail.com

I didn’t mention them, because they’ll be on one of the other bikes, but we’ll have plenty of ratchet straps. The ferry recommends bringing straps to tie the bikes down while crossing Lake Michigan.

Go check out the video again. At the 8:47 mark, you’ll see it attached to the left side handlebar. Thanks!

Can it get anymore close to hand 😆 color matching to with the all the red.

Hope u don't need any of the extras! Wishing yall safe blessed travels!!

@@otis3357 Thanks!

Yep, they were in there……beginning of the second row, before I mention the wire and tape.