Pad Foundation Design Part 1.

Рет қаралды 38,435

3 жыл бұрын

If you like the video why don't you buy us a coffee www.buymeacoffee.com/SECalcs
In this video, we will demonstrate how to determine the dimensions and reinforcement of a pad foundation using a worked example.
Our recommended books on Structural Engineering. amzn.to/3FpwLyK
To stay up to date, please like and subscribe to our channel and press the bell button!
/ @structuralengineercalcs
Quality Structural Engineer Calcs Suited to Your Needs.
Trust an Experienced Engineer for Your Structural Projects.
Please feel free to get in touch.
Same day response with fast turnaround servicing commercial & domestic design.
Phone +447443904751
Email info@structuralengineercalcs.com
www.structuralengineercalcs.com

Пікірлер: 26

@emmadavies7434 3 жыл бұрын

Great video again guys! Keep them coming! Every video im learning something new :)

@tarond57 11 ай бұрын

I'd love this type of content for CSA code, really great video !!

@JoeTengdui-nj6gm 6 ай бұрын

Thank you sir. So helpful in my work as a beginner in foundation design

@jamal19581 6 ай бұрын

Very useful to Civil Engineer , Thank You

@snehalmohite341 2 жыл бұрын

Thank you

@yousefkhleel6394 3 жыл бұрын

Plz continue ❤️

@constructiongabay4609 8 ай бұрын

You forgot to include the assumed weight of concrete pad to be included in the Pu. The explanation is very clear btw.

@TuryasinguraKenneth-in2pe 9 ай бұрын

This is so useful .... Thank you

@pinoyce 2 жыл бұрын

Nice presentation.

@raguelbalcha3497 Ай бұрын

thankyou

@nanadansoapau6956 Жыл бұрын

thank you

@nanw.8131 2 жыл бұрын

really useful! would you make more tutorials about concrete structures, please? thank you!

@TuryasinguraKenneth-in2pe 9 ай бұрын

Can I know much about how the 6 gets in on getting the depth of the foundation please

@JoeTengdui-nj6gm 6 ай бұрын

I am having the same question

@abbassafari4824 3 жыл бұрын

Would you make a video about shallow foundation for walls? Thanks

@khaledsalah3948 Жыл бұрын

Please make a video to explain how to calculate depth of anchor bolt in concrete base, thanks👍👍👍

@mashambashonhai4901 2 жыл бұрын

Marvelous videos. What is the name of the fonts you are using in this specific video?

@cypchard 2 жыл бұрын

Was there a reason for using SLS loading to determine the area of the footing and not ULS? Also wouldn't you reduce the bearing capacity of the soil to allow of a safety factor for variability of the soil strength?

@telestruct Жыл бұрын

For geotechnical design of foundation ared unfactored loads with ALLOWABLE soil bearing capacityto be used. For structural design of foundation, soil pressure from factored loads will be used to determine adequate depth and rebars area.

@richmondprempeh4340 2 жыл бұрын

What BS code states the limits for the depth?

@RC-jx9nw 2 жыл бұрын

sir should the loads not be factored before determining required plan area foundation which would give a higher value than 2650mm width? The allowable bearing pressure is exceeded once the loads are factored. thanks.

@telestruct Жыл бұрын

the used soil permisible strength (bp=100kn/m^2) is already factored from the ultimate soil strength b-ult.

@orchardheadstudio1023 Жыл бұрын

Thanks for this content. Would these calculations work for a much smaller pad foundation, for example, a pad foundation supporting a suspended timber frame for something like a garden room? Would the principles remain similar even though the pad might only be say 200 x 200 maybe 600 deep?

@StructuralEngineerCalcs Жыл бұрын

Thank you for your comment and question! The principles discussed in the video can certainly be applied to smaller pad foundations, such as those supporting a suspended timber frame for a garden room. While the specific dimensions may vary, the fundamental concepts remain the same. When designing a smaller pad foundation, you would follow a similar process of determining the total loads, calculating the required area based on permissible bearing pressure, and finding suitable dimensions for the pad foundation. The principles of moment equilibrium and reinforcement design can also be applied, considering the specific loads and dimensions of the smaller foundation. It's important to note that the calculations may differ based on the specific requirements, material properties, and design codes applicable to your situation. Therefore, it is recommended to consult with a qualified structural engineer or use appropriate design resources to ensure the foundation is designed correctly for your specific application. We hope this helps! If you have any further questions or need additional information, please let us know.

@orchardheadstudio1023 Жыл бұрын

@@StructuralEngineerCalcs thank you very much for the detailed reply. Really great channel