Painting a cinder block wall in Central Phoenix

Рет қаралды 48,800

Crash of Rhinos Painting & Garage Floors

2 жыл бұрын

Пікірлер: 42

@handymanhoney-do6881 8 ай бұрын

Definitely the correct process for the job shown here. I once painted a 2’ high cinder block interior garage wall. The garage was being done nicely for the homeowners new corvette (epoxy flooring, custom tool cabinets, LED lighting, etc. ). Because it was a relatively small area unaffected by rain or sun I used spray paint on all the mortar and then rolled the wall using a high nap roller. 2 coats and done.

@bjd4148 Жыл бұрын

what type of paint used on never before painted old cinder block ????

@harleygirl4life6 14 күн бұрын

I live in Mesa & my daughter Maricopa her place is just built. This is lovely so white bright & clean.

@easypainterslondon 10 ай бұрын

very cool

@davidhill2474 Жыл бұрын

I notice you did not prime. Also what kind of paint? Is there value in "masonry" paint over a good exterior paint?

@marieesposito512 Жыл бұрын

There is a masonary paint I have seen online thru my research.

@mikerickeraz Жыл бұрын

See reply below.

@hotdog2652 Жыл бұрын

How many estimated gallons per square foot for this application on bare cinder (spray, cross spray, back roll, spray, cross spray)?

@mikerickeraz Жыл бұрын

So cinder block (CMU) is what we call a "paint eater"... the porous and rough nature of the substrate makes using a bonding primer unnecessary (practically speaking). Type latex paint can cover at 300-400 s.f. per gallon. But this is at 1.5 mils thick (dry) and it takes two coats AND this is for non-porous substrates... I would plan on 1 gallon per 70 s.f. We spray and back roll the first coat then apply a generous second coat. Applying thicker coats (more than the manufacturer recommends) is generally not a good idea... but with cinder block it just drinks up the paint and really doesn't have any consequences to applying heavier than normal. Let me know if this helps or if you have any further quesitons.

@alwaysaway69 4 ай бұрын

What would you typically charge per either square foot or metre to prepare and paint a cinder block wall like the one in the video?

@mikerickeraz 4 ай бұрын

There are a few variables... but $8/l.f. for a 6' high fence.

@samueladams584 Жыл бұрын

Big Noob Amateur here. I have a cinder block older home that has been painted..... What options do I have if I want to prep for paint or even amateur stucco application ? Thanks

@mikerickeraz Жыл бұрын

If it already painted then a good pressure wash with a good day to dry (if winter, make it two). You can then paint directly from there. If you have "problem areas" a good bonding primer will help. Be advised... WATER IS THE ENEMY. Fences are notorious for having future failures due to the opposite side, top, or bottom soaking up water and destroying the CMU from the inside out. If you want to stucco contacting a good stucco guy is your best bet. But also be advised... The stucco WILL CRACK and you will need regular maintenance. Stucco is rigid and fences can move. You'll see this especially near the areas between panels. Hope this helped.

@jfranklin504 Жыл бұрын

Can you list the equipment that was used from the sprayer to the air tank that was used to complete the job ? because I have a project that I’m working on in my restaurant with my wife , and I want to spray paint cinder block wall and follow it up with a back Roll just as you guys have done

@CrashOfRhinosPaintingAZ Жыл бұрын

We were using a Graco 490 airless sprayer. There is no air tank for airless sprayers. Let me know if you have additional questions.

@rolandorod7811 10 ай бұрын

What tip are they using

@CrashOfRhinosPaintingAZ 10 ай бұрын

@@rolandorod7811 Most of our projects (exterior home repaints) use a 517 to 619 tip size. We don't purchase larger tips for these projects but you could go higher.

@JeffPichotta-tm5lo Ай бұрын

@@CrashOfRhinosPaintingAZ how much would a project like this be for that big wall u were not done with

@jasoncraig4049 6 ай бұрын

Funny. From Prison Grey to Hospital White.

@leogetsome Жыл бұрын

For a minute I thought it was Dana white 😅

@kingofslotsmillion3263 11 ай бұрын

I would have liked to see the entire finished wall

@marieesposito512 Жыл бұрын

Wondering why you did not do a primer before painting?

@mikerickeraz Жыл бұрын

See reply below.

@deaton123able 2 ай бұрын

What is the reason that No Block filler is used after pressure wash? I have Never painted raw cinder blocks without first using Blockfiller.

@CrashOfRhinosPaintingAZ 2 ай бұрын

Great question... The customer on this job did not want to pay the extra cost if it would make the cinderblock completely smooth. Block filler is good... but it's not that good! Thanks for the question and the feedback.

@georgejovanovich536 Ай бұрын

Apsolutli annesesery tu do block filer on that type of fence

@markzucompaletti3883 Жыл бұрын

2022 the painting comes with primer they know what they are doing they are one of the best painters in Arizona county

@deaton123able Жыл бұрын

Primer or Block fill Before Painting ???? Am I Wrong ??

@mikerickeraz Жыл бұрын

This is q question that could fill a book... cinderblock does does not have the issues other substrates have so traditional priming is normally not required. As far as Block Fill.... Sure... it's a great idea. For us it comes down to the budget of the customer.

@deaton123able 2 ай бұрын

Sorry I repeated the question. I forgot I commented before. I have painted a lot of block and never Not used blockfiller. I do understand your reply,thanks.

@thomasjames4159 Жыл бұрын

Have you ever seen in any instance of painting an interior cinderblock wall, where the HOA has to approve that? I live in royal ranch surprise

@mikerickeraz Жыл бұрын

The only time we have EVER seen this is if you have a "view fence" in your back yard. This is the square tub steel fence normally on the back part of the fence if you live up against a golf course or some type of open desert. Due to this, other looking "in" could see the color of your fence and it may be regulated. Hope this helps.

@thomasjames4159 Жыл бұрын

@@mikerickeraz Thank you for the reply. My wife and I are emailing our HOA just to be sure it’s OK to paint our interior brick wall. If the HOA gives us the OK we will definitely be getting a estimate with your company. And we do not have that steel fence thing you’re describing .Thank you for your time.

@cookinitmax Жыл бұрын

You said only the inside of the blocks are going to be painted but not sealed concrete blocks take on water so if you paint one side and not seal both sides and paint both sides aren't efflorescence going to be a problem making paint peel and bubble. Im watching this and dealing with this problem as i watch your video. I think when water hits the concrete it has a chemical reaction thus pushing the salts through the paint causing a flaky bubble appearance .

@mikericker3434 Жыл бұрын

Yes. This is a problem. The issue is the most typically the "other side" of the fence is not my owned by our customer. It's owned by their neighbor. And the neighbor can do whatever they want. They could, if they were spiteful, hook up a sprinkler to soak the wall day and night... This is the difficulty with these types of barriers. Does that make sense?

@user-nk5jh5wj3e 8 ай бұрын

so I have this exact wall ( Rancho Mirage, CA) I am planning to paint. our neighbors have a hedge on their side which does get watering everyday. We have drilled paths the mortar on the bottom cinderblocks to allow of water to 'escape', but still water comes through a little on the first block or 2. Is there an additional primer, or step I can take before painting our side that will help with possible future peeling/bubbling? @@mikericker3434