Pair Sensors & Lights & do an Advanced Setup on Bontrager RIDEtime Elite Bike Computer

Рет қаралды 3,305

8 ай бұрын

This video describes how to do a pairing of your sensors and your lights and do an advanced setup on a Bontrager RIDEtime Elite bike computer. It shows how to update your advanced setting in a computer that’s already been in use and it also shows how to do it in a new computer or one that is been cleared back to the factory default settings by pressing the all clear button. In a new or cleared computer you will have to do a primary set up as well as a pairing of the sensors, lights and an advanced set up. A brief review of how to do a primary set up is provided in the second part of the video. I hope you find this his information is useful. Happy riding.

Пікірлер: 9

@marklouiston2442 Ай бұрын

Thank you for providing me the information I precisely needed.

@alexlescat9441 6 ай бұрын

Many thanks sir ! Super helpfull! From France 🙌🏻🫶🏻

@jameslesterbaldwin9841 6 ай бұрын

You are so welcome. I use this computer and found the manual difficult to understand. I love the auto light function and the auto timer and distance functions. 🙏🏻😊

@aydenreddick8640 Ай бұрын

How do you connect sensors on the non elite version? Hold the back button for 5 seconds takes me to the main settings.

@stixstix212 3 ай бұрын

How do you turn the unit off ?

@ravenmoto5948 8 ай бұрын

Thanx for such an informative video of this. What would pairing the lights do if you dont use auto lights?

@jameslesterbaldwin9841 8 ай бұрын

The manual states "If auto lights is disabled (No) the paired lights will remain stored as a saved connection. The computer does not try to form a connection with the lights." In my experience, if Auto Lights is turned off the lights will not go unless manually turned on. I just checked this on my bike and with Auto Lights off the lights do not go on automatically while riding even though the lights were paired. This suggests that one could turn on Auto Lights without disturbing the other connections but I don't know how to turn on Auto Lights in one maneuver (like with Night Mode). There is a relationship between Night Mode (press the front button 10 seconds and press Night Mode Yes) and the lights but just turning Night Mode on does not turn the lights on if Auto Lights is off. If Night Mode is turned on and Auto Lights is activated, the front light will change to Medium Steady and the rear light will change to Night Flash. If Night Mode is off (and Auto Lights is on) both the front light and the rear light are on Day Flash. But Auto Lights needs to be activated for Night Mode to affect the the way the lights flash. If you find an easy way to turn on Auto Lights let me know. Enjoy your riding and be careful out there. Jim

@ravenmoto5948 8 ай бұрын

@@jameslesterbaldwin9841Thanx so much for the indepth answer. I will try the night mode, I just want lights on at dark. Thanx again!

@fredaxon1761 5 ай бұрын

Hi James, I have a question on the "auto start" function when starting a ride. My setup was done with your help, but then when I go for a ride the computer just don't start registering new data. Ant tips on where to look?