Part 2 Ford Transit propshaft and centre bearing replacement , restoration, rebuild smiley Prop LWB

Рет қаралды 7,573

Nicks Garageuk

3 жыл бұрын

Part 2 of the restoration I get on with changing the prop over

Пікірлер: 20

@darrenwd1993 2 ай бұрын

Straight forward video and made it look easy. Cheers mate.

@NicksGarageUk 2 ай бұрын

Cheers pal,, one of my early videos,, I have not long removed it to adapt it for the new engine 👍

@al-frescogarage7271 3 жыл бұрын

The good old prop bearing I’ve had transits eat them for fun 🤩

@NicksGarageUk 3 жыл бұрын

it’s my first, wasn’t a bad job really but filming made it more time consuming

@al-frescogarage7271 3 жыл бұрын

@@NicksGarageUk no it’s pretty str8 forward once the lock tab and washer out, I know sometimes I just crack on and do a job without filming when it’s going well , I’ve removed suspension and brakes from 1 side of subframe today and didn’t film but now I know how it’s done I’ll film the other side tomorrow

@NicksGarageUk 3 жыл бұрын

Not a bad plan, it will make you look more professional 😄

@johnevans7389 3 жыл бұрын

Need to do the UJ, the bearing is easy. Well done.

@NicksGarageUk 3 жыл бұрын

I’m not sure I would tackle the UJ because some of mine are welded on.. hopefully the video will help someone who hasn’t done it before 👍🏻

@stefanoderosa2800 Жыл бұрын

Hello, one question when you tight with the 17mm you can use a normal 17 or I see you have one modified

@user-pn7ky6so4q Жыл бұрын

Good job!!!

@NicksGarageUk Жыл бұрын

Cheers 👍

@borntotravel8878 9 ай бұрын

Why didn't you replace the u joint where the was a play on the old one ? Instead of getting a new shaft?

@NicksGarageUk 9 ай бұрын

The old prop had a missing bolt at the joint when I got the truck so decided to just replace the full section

@slimshady6718 3 жыл бұрын

They don’t have a clamp on the lower leaf spring

@NicksGarageUk 3 жыл бұрын

I know not as standard but mine has had an extra leaf added so wondering if it would help

@alanbedford9989 3 жыл бұрын

Just been watching u do prop just done mine the front rear spring hangers rear in bottom of chassis is 2 bolts slip them out copper slip em put them back in it will pay u in yrs to come just go easy plenty wd I don't take prop of at front just stand it on axle stand part it tap them bearings off u can buy just the bearing no 6006rs 30mm centre hole