My Uncle's Vintage Nitro Rc Boat - Rebuilding Black Label

No video

My Uncle's Vintage Nitro Rc Boat - Rebuilding Black Label

Рет қаралды 16,309

Күн бұрын

I had no memories of that boat running when i was a little boy, but I played and marveled at that boat for many many hours. It felt great to finally see it running! I know this is quite a bit different to what I'm used to display here on KZfaq, but it's still summer, and it means a lot to me. I'm happy i took on the challenge. The only part I'm sort of disappointed in, is the Tupperware to waterproof the receiver. Yes, it works, but it looks a bit goofy to be 100% honest with you all. But it's the best i could do with the limited budget.
Now, to get back to regular content... Next week, expect to see a running Project Meteor 2! :D
Thanks for boating with me!
Pascal

Пікірлер: 31

@nikhilparker616 10 ай бұрын

I have my uncles vintage boat too! Mine is exactly like yours, but the body is a different paint job. Ever since a little kid I always thought it was cool, and I would push it around in the pool. Thanks for the video, I really want to rebuild mine.

@voneboy Жыл бұрын

Absolutely awesome, the remaiden of your uncle had put a big smile on my face, I“m loving these nitro boats,they have their own flair,great to see another people bring them back to life👍👍👍

@CozyRC Жыл бұрын

Great rebuild! The smile on your face says it all. Cheers!

@chilly7261 Жыл бұрын

I love this story! Very cool vintage nitro tunnel hull. Get a jar of silicone conformal coating, remove the cover from the receiver and brush on both sides of the circuit board, coating everything but the pins for the servos. I do that with all my boat receivers, this has never failed me and I don't even put them in a waterproof radio box. Just velcro them inside somewhere. Thanks for sharing...

@TheGreyGhost_of43rd Жыл бұрын

Good work. I have one identical! Ive been holding onto it since i was a kid, me and my friends got it from an antique shop. I will actually fix it soon 😂

@dennisschnopp1046 2 жыл бұрын

Hey brother! So cool to see that! Has been years since I've seen an old school nitro outboard! That's a great hull too! Keep it alive!!!!! I miss mine but that was 30 yrs ago! Lol! I'm looking forward to winter at this point to see the new snowmobile stuff! Rock on my friend! 🤘🤘

@Pascal_Robert--Rc_Creations 2 жыл бұрын

Its coming! Next week! 😎

@Livlifetaistdeth Жыл бұрын

That smile on a grown man's face says it all.

@josephhobbs3009 Жыл бұрын

Just had to comment even before the video ended! I love the Black Label paint scheme! I have an MRP Mach 1 3.5 tunnel haul brand new in the box with a brand new 3.5 K&B 4 it plus a tune pipe conversion! I have one other MRP Mach 1 with the offset cabin and cowling for oval racing only I have had it to 72.3 miles an hour on a sport handheld radar gun! On 20% Nitro. Watching this video and a couple of others I'm going to have to dust these puppies off and go have some more fun with them especially the new MRP Mach One which is already been painted in fire engine red the top deck that is! Thanks for the video again very nostalgic

@Loulovesspeed Жыл бұрын

Cool re-build to your uncle's RC boat. I had a Prather Tunnel Hull Hydro sometime in the 1980s, with an epoxy fiberglass hull with the upper hull already fastened at the factory. The servos and receiver were nicely packed in a watertight container with a 1/8th inch thick Lexan cover, that was held in place with about a dozen machine screws - it never leaked, even after some serious flips and semi submersions. Mine was powered by a K&B 7.5cc engine that I ran on 25% nitro fuel and the boat was quite fast. I don't know how fast as there were no GPS attachments then to calculate speed, but it was very quick and handled well. I sold it eventually and 5 years ago I picked up a Traxxas 36" DCB M41Tunnel Hull, but electric powered. It has a brushless motor with (2) 11.1 volt Lipo batteries. It does have a GPS attached and I have recorded over 53 mph, which I know is a bit faster than the old gas powered one. RC boats are great fun, even for an oldster like me!

@Pascal_Robert--Rc_Creations Жыл бұрын

Thats a nice story! I'm not a boat guy personally, but it was a fun project to put together. I would have liked to use the stock lexan seal for the electronics, but it was just too far gone. If the budget would have been higher I would have put a bit more thought into it and maybe even redesign the entire electronic pod. But the goal was to make it run again. And for that, its a sucess

@ifly65 Жыл бұрын

I guessed a catamaran when you told me about it. its a tunnel hull. Sweet rebuild!

@kiwiboater Жыл бұрын

Awesome rebuild and great video man!

@MillsAmmunition Жыл бұрын

Awesome job bud!!

@royceracoma8864 Жыл бұрын

That boat ran " flawless", Great job!

@gabriellarouche3702 Жыл бұрын

Wow vraiment un beau bateau avec ma bière favorite héhé

@kimderose9931 2 жыл бұрын

Cool boat

@wavewaker2 Жыл бұрын

Nice one ☝

@chairidden Жыл бұрын

I still drink black label 😎🍻

@maximdesloges38 Жыл бұрын

Dès que j'ai entendu ton anglais je savais que tu était au québec haha belle video lache pas

@alexmaus5059 Жыл бұрын

Hello, I have the first version of the Kyosho Graupner kart 10 NR 4939. NIB for sale.

@hakeemalameen9687 Жыл бұрын

I have one I'm trying to repair can't find the part can you send me to the right place. Please and thank you

@Pascal_Robert--Rc_Creations Жыл бұрын

Im not the best to ask this question honestly. Join a facebook group, they will be a lot more used to parts and suppliers for boat stuff

@trevevns3242 Жыл бұрын

Did u Check if it has a second tuning screw on the throttle side of the carby my boat has a finger adjustable one then there is one in the side of the throttle piece of the carby if you aren't sure where I mean I can make a 30 sec video to show you

@Pascal_Robert--Rc_Creations Жыл бұрын

The only screw on the lever side holds the carb lever on place. As odd as it seems, i think this model only has one screw

@trevevns3242 Жыл бұрын

@@Pascal_Robert--Rc_Creations kzfaq.infoKXYh5dZ3GCM?feature=share

@vazza69 2 жыл бұрын

nice.

@porschetech72901 2 жыл бұрын

awesome boat.... i have one very similar that i have never taken to water lol .... if whomever reads this please understand im not smart enough to speak more than one language please fogive me for asking something thats none of my business.... the man operating the boat in the end.... hes the uncle? also if he was then was it you whom restored it for him? im sorry im nosey i love the boat mine is painted totally different i like yours much better..... hello an God bless yall from Arkansas

@Pascal_Robert--Rc_Creations 2 жыл бұрын

Yes, i restored the boat for my uncle. (The man driving at the end of the video.) He has had it for a long time but I never saw it run, so I had to put it back together for him!

@porschetech72901 2 жыл бұрын

@@Pascal_Robert--Rc_Creations thank you sir for replying and for being an awesome nephew.... you did a great job on the boat sir but what you gave to your uncle was priceless in my opinion..... well done sir