thanks. Meldaproductions - its one of the free range

You just need an adaptor. I use a 3.5mm patch lead with a headphone adaptor. Sometimes, however, it’s a pain if the the L+R channel get mixed up somehow so you have to have the adaptor half plugged in. I’ve actually just ordered some 3.5 - 6.5mm jack cables to simplify things.

@@StarskyCarr so i just ordered the crave and a dr600. What cables do i need to buy to hear the reverb in my headphones?

Max Janssen the output of the reverb will be line level, so you’ll need to amplify the signal. This is normally done using a mixer, amplifier, audio interface etc. And using the headphone socket in those. But if you have none of them and just want to plug headphones direct you’ll need a headphone amp. I think the Behringer MA400 May work... but I can’t be 100% certain. To use that you’d need a standard 6.5mm (1/2 inch) jack lead. The reverb won’t be stereo though, unless you buy a split stereo cable as it looks like the D600 uses 2 outputs for L + R but Again I’m not sureThere are so many options tbh depending on what you already have that I can’t cover all here. Basically anything with an audio input and headphone socket will generally work.

@@StarskyCarr thanks a lot for so much info!! Its really helpfull. And will make me help to chose what i should get next!

You prolly dont give a damn but does someone know of a trick to log back into an Instagram account? I stupidly forgot my login password. I appreciate any tricks you can offer me

@Dario Finley instablaster :)

@Decker Hayden thanks so much for your reply. I found the site through google and im trying it out now. Looks like it's gonna take quite some time so I will reply here later with my results.

@Decker Hayden It did the trick and I finally got access to my account again. I'm so happy:D Thanks so much, you really help me out!

@Dario Finley No problem =)

That’s to enter input/output mode so you can set what signal is sent from the ASSIGN CV out. I use this to emulate LFOs. I’ve a video showing exactly this. I think it’s #3 in my tutorials.

Thanks, you can but only by using the self oscillation of the filter

@@StarskyCarr I have it seen in an other video of u. I love u

Its from the free plugins from Meldaproduction I simply put it in the instrument channel in Logic as an effect. Each DAW will be different. To watch it ‘live’ in Logic the channel has to be in record mode and the ‘i’ button next to the record enable button has to be lit.

Thanks... happy holidays to you my friend

have you watched this? kzfaq.info/get/bejne/gMuoma2Es7y1nYE.html

I got the crave and the novation bass station 2 and the crave got much more depth and punch in sound than the bs2, i was really shocked while trying the first groove with the crave and bs2 together. I first wanted to use the bs 2 for bass and the crave for leads and arps but now i use the bs2 for leads and the crave for low end

😂