Drywall Pro Trick to Repair Any Size Hole in the Wall

Рет қаралды 20,396

Күн бұрын

In today's video I show you a drywall pro trick to repair any size hole in the wall while I'm on a drywall skim coating and soundproofing project. Thanks so much for watching and commenting! -Paul
Here's the entire Water Damage Ceiling and Wall Repair Playlist:
• Water damaged ceiling ...
If you're new to the channel? Please consider Subscribing to see more of my upcoming video's. / @paulpeck
☑️Below in my Drywall and Painting Shop are the tools and products I talked about in this and use in all of my videos: (This link is an Amazon Influencer Affiliate store link where I'll earn a small commission if you make a purchase at no additional cost to you). ▶ www.amazon.com/shop/paulpeck
~~~~~~~~~~~~~~~~~~
My last three video uploads:
How to Repair and Match Old Texture!
• How to Repair and Matc...
You Probably Never Heard of this AMAZING Drywall Tape!
• You Probably Never Hea...
AMAZING New Drywall Tape Perfect for Patching Your Ceiling!
• AMAZING New Drywall Ta...
~~~~~~~~~~~~~~~~~~
My latest video series:
Here's Part 1- How to Repair Drywall Tape Joints on a Ceiling:
• How to Actually Repair...
Part 2: How to mix Hot Mud and Apply to Ceiling Crack Repairs
• How to mix Hot Mud and...
Part 3: Ugly Drywall Ceiling? You Can Actually Skim Coat It New Again! • Skim Coat Your Ugly Dr...
Part 4: This is a MUST when Repairing Drywall!
• This is a MUST when Re...
Part 5: The Ultimate Texture for Ceilings!
• The Ultimate Texture f...
~~~~~~~~~~~~~~~~~~
Checkout my Live Streams Here:
• Paul Peck DrywallTube ...
~~~~~~~~~~~~~~~~~~
Skim Coat Over a Painted Popcorn Ceiling- Skim Coating Tips and Tricks: • Skim Coat Over a Paint...
How to Skim Coat Ceilings for Beginners Tutorial: • How to Skim Coat Ceili...
How To Skim Coat a Room in 30 minutes!! Skim coat drywall tips and tricks: • Skim Coating a Room in...
*(Part 1)How to skim coat using paint roller trick- Getting rid of Knockdown Texture- • How to skim coat using...
How to Repair and Skim Coat a Wall after Wallpaper Removal Tutorial Playlist: • How to Repair and Skim...
How to Skim Coat Ceilings Step by Step Guide for Beginners: • How to Skim Coat Ceili...
Water damaged ceiling and wall project- Diy drywall repair series: • Water damaged ceiling ...
~~~~~~~~~~~~~~~~~~~~~~
*How to skim coat a wall in less then 10 minutes | Diy Drywall Tips and Tricks- • How to skim coat a wal...
#PaulPeck #DrywallTube

Пікірлер: 73

@ThatKiltedGuyDIY 4 жыл бұрын

Hey Paul, hows it going. As you know, I'm a fellow KZfaq creator, and this is real similar to how I teach it. I do prefer to use scrap OSB, or even laminate flooring as it splits less often, but otherwise it's very similar to the video I did. I even mark the top like you did, that way you don't have to cut a perfectly square scrap of rock, it could be any old shape since you trace it and cut that out so it fits perfect every time. Good job man. Stay warm.

@ProudCebuana 4 жыл бұрын

I am so amaze of how you repair the dry wall, well mention it to my hubby

@Pokekid269 4 жыл бұрын

Hey Paul. I’m skim coating a ceiling today. Thanks for all the tips and tricks brother!!!

@petethehandyman9185 4 жыл бұрын

Awesome demo,this is how I patch holes as well, you’ve got to have a support for the drywall,. Gives me a good excuse to save lumber scraps

@SanDiegoVets 4 жыл бұрын

Very informative Video Paul Keep Creating my friend!!! Running this playlist!!

@sade62397 Жыл бұрын

I just finished patching a 15” x 15” hole in my bathroom wall where some plumbing was recently repaired.. thank you so much for sharing your amazing talent!! I did it!! Not shabby for a 49 year old mom!! 💪 😁

@PaulPeck Жыл бұрын

That’s awesome! 👏🏻😎 Thank you so much for the feedback.🙏

@OlivertheJoyboy 4 жыл бұрын

So simple and well explained man! thank you! I'm 17 and going into apartment maintenance and you come across a lot of residents with anger management issues lol so this is really helpful to know how to patch any hole. thanks again for the tip!

@Runnyoutdoors 4 жыл бұрын

Hi bud... just a word of thanks for coming in my ls.. fantastic guys and channel

@ConstructionKronies 4 жыл бұрын

Right on dude! I do the same thing with the screw in the middle. Great tips bro!!

@IslandLifeFishing 4 жыл бұрын

This is an awesome video that will be useful information for years to come! Sharing you out

@MrJamesTimmons 3 жыл бұрын

Hi. I'm a DIYMTSGIW'er (Do It Yourself Multiple Times and Still Get It Wrong). Literally I am kryptonite to drywall. I know it hates me because it whispers into my ear all night," Jim, we haaaate you...." On a positive note I enjoyed your video and think I may succeed on the repair I need to do.

@haleigh7658 4 жыл бұрын

Great video! 👍 super informative. Love the pro-trick you mentioned with the screw in the middle!

@PaulPeck 4 жыл бұрын

Hey there Haleigh!💥👊🏻 Glad you’re enjoying my videos! Thanks so much for watching and commenting!😎 -Dad

@franklin9613 4 жыл бұрын

Done perfectly....Awesome Job👍

@phantomrangerofmonsterslay465 4 жыл бұрын

Nice vid.very informative. Thanks for the tip.

@harrytinker2328 4 жыл бұрын

Nice video explanation of this procedure. I have used this method many times as a handyman. I prefer to use pieces of plywood instead of furring lumber because it won't split when the screws drive in. Lately I have been using the California patch technique for small holes.

@XWRITTINNBLOODX 4 жыл бұрын

Great video ....and some very useful information about the doorknob repair. ..POW ... I hit the like

@annewalsworth2220 4 жыл бұрын

Hello....New to your channel from Carolina Hillbilly! I've seen this done before.....pretty good results! Thank you for sharing and take care!

@thhomasmarks 2 жыл бұрын

You're a hell of a guy, thank you this is still helpful

@AAPHomestead 4 жыл бұрын

Very nice paul thanks for sharing

@teh60 4 жыл бұрын

I’ve used that method. It works great, nice and strong and looks good.

@floridadawg9857 4 жыл бұрын

Thanks for tips Paul........... Great Job

@sipntools 2 жыл бұрын

DIY 🤓 and so happy I came across your video. I’m repairing holes from taking out hideous porcelain towel bar and toilet paper holders in the bathroom!

@anthonyelectric6045 4 жыл бұрын

Hey Paul! Quick shout to ya about skimming the walls. Did the roller trick on three walls. Came out smooth as a baby’s ass. Thanks all the help.

@panama-sx2oh 4 жыл бұрын

hey paul thanks for the video I'm a electrician so when I do side jobs to run wires I have to cut holes thanks with the center screw holding the wood while you screw usually I make hole big enuff where I can hole the wood by hand but this way much better thanks keep videos coming

@ram12e6 4 жыл бұрын

Great video I watch them all thanks for making them..I do have a question about flat taping I know it's too not touch the adjacent wall but what does flat taping do cant you just caulk the corner from the new drywall on celing to the old drywall on the walls just curious on what flat taping does.. thank you very much

@UrbanVanlife 4 жыл бұрын

Great little fix there mate . And I was wondering what you was going to put in the hole . Looks nice and easy as well for the average DIY person to do at home

@bettyhordeclinic6147 4 жыл бұрын

Ive filled the holes before now and they never look right Obviously a better way to do it and you make it look so easy great tips and a great share I do my own DIY

@norcaltrav 4 жыл бұрын

Great video!

@haliltopcuu 4 жыл бұрын

Great video keep it up ✌🏼✨

@PREDATORGAMINGHD1376 4 жыл бұрын

good video keep up with the good work

@ThisZombieBitesEverything 4 жыл бұрын

Awesome mate,good video

@CJsINFO 4 жыл бұрын

*@Paul Peck DrywallTube Does It Again! Love It!*

@CJendaOfficial. 4 жыл бұрын

Thanks, good to know how to things right!

@mastman2315 4 жыл бұрын

paul excellent tips for us DIY

@BarryTRCRacing 4 жыл бұрын

Great video handy tips and glad I found you on pusa studios

@vchris348 7 ай бұрын

Paul, thanks--DIYer.

@Garethfrostturkeythroat113 4 жыл бұрын

Liked and supported new friend your channel is awesome

@cwrowe 4 жыл бұрын

Good video...👍

@scottburgle2169 Жыл бұрын

Paul….wanna come to my house? I’d give you enough video for a lifetime!

@cindyfoster2165 4 жыл бұрын

I have a problem crack that has come back. I used a blade to bevel, then actually cut all the way through both boards (this is a butt joint) in order to remove all the crumbled plaster. Both wallboards have been screwed into wood and there is no movement now or loose material. The crack opening is now at least a 1/2” wide as well as it being the entire depth of the drywall (1/2”). Am I ready for repair with just Zinsser 123 Primer and then powdered mix joint compound with Fibatape since there is wood behind the gap all the way from top to bottom? This is overall a foot tall. The area I’m repairing is where the house was previously flipped and the wall from dining room to kitchen was cut away leaving just a foot across the ceiling and a couple feet on one side, the other side is the full length of the living room.

@seanomalley2015 3 жыл бұрын

can you do a video on nail pops or if you already have one can you direct me to it? Thank you

@stephenbamford 4 жыл бұрын

Genius!

@ByHulk1 4 жыл бұрын

Nice job sir, that’s for showing this video. Leroy Chavez.

@MrGawn 4 жыл бұрын

"...quick setting joint compound that comes in a powder form when using a fiberglass mesh tape." So, you cant use and store bought premixed joint compound? If so please tell me the brand and type, thnx!

@theswitchwarriortonyskittl530 4 жыл бұрын

HI NEW HERE... how are you :) I just joined your channel !!

@JeremyTryit2 4 жыл бұрын

I promise you'll enjoy your stay! This is the best #DIYer on KZfaq #KeepTrying

@Bamacher59 4 жыл бұрын

Been using this method for 30 years

@jazz901 2 жыл бұрын

Paul, I watch your videos and Guy's (below) nonstop. I want repairs done right (w/wood) and not half way, so down came my towel racks (gently) and I was left with those tiny circular metal things that refused to be removed. I relied on youtube instructions how to remove, but nothing worked so I used my jewelry tools. Bought some sheet rock, a kobalt knife, sheetrock screws and 3/4" thick wood that was cut 3" x 6". Knife wouldn't go thru 60 year old sheetrock, so got a large serrated kit knife. After a difficult hour of learning a few new bad words, I removed my 4 x 4" sq. Half way thru I remembered, DUH!, there was a pocket door behind where I was cutting. Stop laughing. It was not damaged. Now, pls advise, it measures exactly 1 1/2" from the pocket door to what used to be the wall. The wood and new sheetrock measure 1 1/4" pressed together. Would you suggest I go forward? Or would it be better to somehow patch this now 4 x 4 foot hole? 2nd question - I want to try another solution for the other metal circle things. I've tried hammering them in which doesn't work. Should I use my jewelry tool again, pull them out leaving holes, and just patch with hot mud? I want to install new towel racks. Thank you so much.

@chuckb.5076 4 жыл бұрын

I’m a DYIer. I learn so much from your videos. Thanks so much!

@ryanmatthew9975 4 жыл бұрын

Hey Paul, my name is Jon. Just subscribe to your channel. I aspire to become a painter/crafts men don’t have to much money to go to a school that teaches these things. So I hope to learn as much as I possibly can for your channel.

@ryanmatthew9975 4 жыл бұрын

Subscribed*

@ryanmatthew9975 4 жыл бұрын

From* lol spell checking sorry.

@RobMcCray 4 жыл бұрын

Wow great tip, thanks for sharing that New subscriber here Let`s grow!

@Techinfinities 4 жыл бұрын

Hello my family great to join you.

@3dandyrandy3 4 жыл бұрын

LOL,, I do the same arrow on my repairs,,,,

@lizf628 4 жыл бұрын

Why quick setting joint compound that comes in powder form when using fiberglass mesh tape? What if you use the standard stuff?

@PaulPeck 4 жыл бұрын

It has good chance of cracking...

@lizf628 4 жыл бұрын

Thanks!

@PaulPeck 4 жыл бұрын

Liz Feagles happy to help!👍🏻

@babukatv6923 2 жыл бұрын

What drll is this?

@JeremyTryit2 4 жыл бұрын

😳Know Plenty Abusive Relationships That Could Probably Use This Trick!

@tomorrowstools2159 4 жыл бұрын

🔵👍

@dutchbros6125 4 жыл бұрын

why do all that for such a small whole, why not just mud it and sand it, you might have to mud it a couple times cause it shrinks. i think thats less steps and in easier way. thanks for sharing i learned many things as well.

@christophertracy5188 2 жыл бұрын

I was wondering this as well. One advantage seems to be that you can put a screw back in that spot after it's refinished...but I've got a wall with like 15 large drywall anchor holes and I can't imagine having the patience do this fot every single one... But I'm guessing the finish would look better and blend in nicer with this method. I have always had trouble with the mud kind of bubbling out of the hole while still wet and then cracking as it dries. Any comments Steve ? Thanks!