Penn Spinfisher V 9500 Fishing Reel - How to take apart, service and reassemble

Рет қаралды 12,444

3 жыл бұрын

Penn 9500SSV tutorial on breaking down, servicing and reassembling. See below for helpful equipment and supply links. If you found this video useful, please show some love by hitting the thumbs up button and consider....
Hitting the Thanks button under the video
or my PayPal tip jar:
PayPal.Me/TSGReel
Amazon links (containing "amzn.to") and eBay links (containing "ebay.us") below are affiliate links. If you purchase ANYTHING through these links, I may get paid a commission. Help fund my future endeavors by using them when you purchase.
AMAZON main page - amzn.to/46qttJS
EBAY main page - ebay.us/3BvTqi
Paper towels I Use:
ebay.us/Hi2pWc (eBay)
amzn.to/48udknh (Amazon)
Gloves I use:
ebay.us/4CDP89 (eBay)
amzn.to/3SeAbgY (Amazon)
Penn Spinfisher V 9500 Reels For Sale on eBay:
ebay.us/qb0mxd
Penn Spinfisher Reels For Sale on Amazon:
amzn.to/3QnkyU7
Penn Spinfisher Reel Combos For Sale on Amazon:
amzn.to/3QnzBNn
The mini screwdriver sets I use spin freely in the palm of my hand, which I prefer for speed.
MINI SCREWDRIVER SET (eBay)
ebay.us/QbICC9 (Spinning - Option A)
ebay.us/STpQDI (Spinning - Option B)
ebay.us/xvTFRx (Non Spinning)
MINI SCREWDRIVER SET (Amazon)
amzn.to/3r8NdBF (Spinning - Option A)
amzn.to/43ZpJ0g (Spinning - Option B)
amzn.to/437CsN8 (Non Spinning)
I, generally, use a ratcheting, interchangeable regular-sized screwdriver for the initial loosening of screws. Here's a link to the brand I use:
amzn.to/440Bwvb
Get some additional, varying sizes Flathead and Phillips bits while you're at it.
The adjustable wrenches I use (instead of hex nut wrenches) are Husky, but these (with the red insert) work very well... 6-inch will be used the most:
ebay.us/CKiSM7 (eBay)
amzn.to/3PAbkTT (Amazon)
*********************************
Other Videos You May Like:
• Shimano Baitrunner 650... (Shimano Baitrunner 6500B Repair)
• Fin-Nor Offshore 7500 ... (Fin-Nor Offshore 7500 Tutorial)
• Penn Battle II 4000 Fi... (Penn Battle II 4000 Tutorial)
• Quantum Boca BSP40PTS ... (Quantum Boca BSP40PTS Tutorial)
• Shimano Baitrunner 800... (Shimano Baitrunner 8000D Repair & Tutorial)
• Penn International II ... (Penn International II 50SW Tutorial)
• Penn Spinfisher 6500SS... (Penn 6500SS Repair & Tutorial)
*********************************
If you prefer to use hex nut wrenches, I'd recommend angled/offset ones, like these:
amzn.to/44ljUtL
or a pass-through socket wrench set, like this:
ebay.us/ygHAQo
Reel grease I use:
ebay.us/AtmVUv (eBay)
amzn.to/46p4p66 (Amazon)
See my community page for links to parts suppliers:
www.youtube.com/@TSGReelServi...
Drag grease I use (brown for warm weather, purple for cold):
ebay.us/WU7NOh
Oils I use:
ebay.us/RLtGzV (eBay)
amzn.to/3PubkVA (Amazon)
ebay.us/I3NXpx (eBay)
amzn.to/44kjdkz (Amazon)
Stainless Steel bearing cleaner:
ebay.us/hwU2YS (eBay - the red one)
amzn.to/4467s1q (Amazon)
Ultrasonic Cleaners. 3 liter or above:
ebay.us/olT4J6 (eBay)
amzn.to/3NusJuD (Amazon)
Small parts mesh basket for ultrasonic cleaner:
ebay.us/cmvoe8 (eBay)
amzn.to/3NuycBM (Amazon)
Ultrasonic cleaner additives (use in moderation):
amzn.to/444EaQG (dish liquid)
amzn.to/43bYZIY (heavy duty cleaner)
amzn.to/440wcZ5 (alcohol)
One of the bearing greasers I use... contact Alan directly (non-affiliate link):
alantani.com/index.php?topic=...
*********************************
Quick links to navigate my channel:
Main Channel: / tsgreelservice
Video Library: kzfaq.info...
Individual Playlists: kzfaq.info...
*********************************
Workshop Overhead Light:
amzn.to/44fxbo0 (Amazon)
#TSGReelService #FishingReelRepair #pennreels #pennfishingreels #reelrepair #fishingreelmaintenance #fishinglife #offshorelife #pennspinfisher #beachfishing #rockfishing
‪@TSGReelService‬

Пікірлер: 79

@TSGReelService 8 ай бұрын

Appreciated the video content? Want to show some love? Hit the Thanks button under the video or hit up my PayPal tip jar: PayPal.Me/TSGReel

@steffensamlal1854 3 жыл бұрын

Well done the only thing you forgot to disassemble was the paint. Thank you I learned a lot

@TSGReelService 3 жыл бұрын

Lol thanks for watching! It's been a long day, so I appreciate the humor! More vids to come!

@erwinwestby5719 3 жыл бұрын

Very helpful, i have 8 of these bad boys. Thank you sir.

@TSGReelService 3 жыл бұрын

You're welcome and thanks for watching! Check out my other vids and let your friends know about the channel.

@raymondchen18 3 жыл бұрын

Great video. I had three of them thank you

@raymondchen18 3 жыл бұрын

Can you please make a video on Penn Spinfisher V 7500 thank you very much

@TSGReelService 3 жыл бұрын

Thanks for watching! More vids to come.

@TSGReelService 3 жыл бұрын

Will do, if one comes across the table and I have time for a full breakdown.

@alexanderroth5176 2 жыл бұрын

Great video

@TSGReelService 2 жыл бұрын

Thanks for watching! More vids to come. Spread the word about the channel.

@fischercustombaits 3 жыл бұрын

Awesome job 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

@TSGReelService 3 жыл бұрын

Thanks for watching! Let your friends know about the channel.

@fischercustombaits 3 жыл бұрын

@@TSGReelService sure , I will. My penn reels are still working. I could not get some parts, so I had to make them . That was fun though. Greetings from Germany .. Jan 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👋👋👋👋

@allanovic3792 11 ай бұрын

Je viens de le commander pour la pêche du silure hâte de voir se qu’il vaut

@TSGReelService 11 ай бұрын

Thanks for checking out the video! Good luck with the reel. Spread the word about the channel.

@YL-mc9oz 3 жыл бұрын

Hello, I have just discovered your channel and I really enjoy the videos, the professionalism, the form of the work and the thoroughness. I have such a roller model 10500, its drag is very weak in terms of the clicker, I wanted to please ask is there a way to replace the clicker in order to be noisy when a fish is caught and not as quiet as in the original ? Thanks in advance

@TSGReelService 3 жыл бұрын

Welcome and thanks for watching. Check out the part of the video where I break down the drag. Clean out the ridges in that plate thoroughly and add a very thin coat (a lot less than you see when you first open it) of grease.... the clicker will be louder.

@YL-mc9oz 3 жыл бұрын

@@TSGReelService THANK YOU !!!

@TSGReelService 3 жыл бұрын

You're welcome.

@fishydubsfishing6516 2 жыл бұрын

Very good the last video on the spin fisher when you didn't touch the drag did you ever find out why there was a grinding with the drag locked all the way down because my real is doing the same thing

@TSGReelService 2 жыл бұрын

Thanks for checking out the video. I'll need more info than that. It would be in the video. Go to it and comment with the time stamp. Thanks.

@marcomichienzi9852 3 жыл бұрын

Great video. Thx for tutorial. What grease do you use for the drag washers?

@TSGReelService 3 жыл бұрын

Thanks for watching. What's the part. number?

@marcomichienzi9852 3 жыл бұрын

@@TSGReelService number 56 and 56T, Drag friction washer

@TSGReelService 3 жыл бұрын

@@marcomichienzi9852 Cal's drag grease.

@marcomichienzi9852 3 жыл бұрын

@@TSGReelService Grease at 1:01:46. Sorry for my english.

@christophersmartt6013 Жыл бұрын

i have a penn 8500 and the screw that holds the line roller, was damaged from previously attempting to remove. How do i remove it? so i canreplace with a new one.

@TSGReelService Жыл бұрын

Thanks for checking out the video. I have a trick for that situation in one or two of my other older version Spinfisher videos, but don't remember which one. Check my video library for it.

@christophersmartt6013 Жыл бұрын

Hey buddy a slight problem i have with my Spin fisher v 9500, when i open my bail arm it dose not stay open i literally have to open it and put some effort to get it to remain open. what could be the issue

@TSGReelService Жыл бұрын

Hi, can you make video showing the problem so I can see what's happening when you do it? Do it a couple times slowly from different angles. You can post the link to your video here so I can check it out. Thanks.

@iCrocodile Жыл бұрын

Hello. Disassembly and lubrication of the new reel after purchase should be done immediately ? Or is it still blurred by the manufacturer?Thanks

@TSGReelService Жыл бұрын

Thanks for watching.... I'd prefer to do it that way.... sometimes, they even come from the factory with pieces missing or incorrectly put together..... always good to double check and set it up the way you like. Note, it may void the warranty if you do. More vids to come.

@iCrocodile Жыл бұрын

@@TSGReelService Thx for answers. Maybe you can make main gear and pinion gear from stainless steel ? :D

@iCrocodile Жыл бұрын

Hm, in ssV ball bearings not fixed by screws in frame like in ssVI ?

@jjseandxcefree 3 жыл бұрын

so whats the trick in putting the spool back on? I screwed something up putting it back on and now I have no drag..help...

@TSGReelService 3 жыл бұрын

There's no trick to putting the spool back on. Just line up the keyed metal washers with the shaft. Is your issue with a 9500ss or 9500ssv?

@christophersmartt6013 Жыл бұрын

Where do you buy the replacement parts for repairs?

@TSGReelService Жыл бұрын

Check mystic parts.

@philproud7254 6 ай бұрын

Hi what do you not use the Cals grease on the internals of the reel ? Thanx

@TSGReelService 6 ай бұрын

I use it mainly for drag washers, but you can also use it anywhere else you would add grease in a reel.

@philproud7254 6 ай бұрын

Thnk you :)

@TSGReelService 6 ай бұрын

@@philproud7254 No problem.

@praveenprasad1318 3 жыл бұрын

Hii... Spinfisher vi 8500 Live liner or standard 9500 is better to bye plz reply

@TSGReelService 3 жыл бұрын

Thanks for watching and your input. More vids to come.

@hownowbrowntrouttasmania7389 3 жыл бұрын

How do you stop that slight rotor back play after servicing..? my slammer dose it as well now. Ive put it all back together write.? cheers:). Tackle advisors had the same problem as well.:)

@TSGReelService 3 жыл бұрын

Thanks for watching! I'm assuming you put it back together properly and I'm guessing he (Tackle Advisors) also checked the following things..... but the cause can only come from a few places.... the rotor nut (make sure it's set), the opening in the rotor where the pinion gear goes through (if there's wear in the corners or edges, it can allow for some initial "slippage" as it "locks" into place during the transition from from spinning to stopping and vice versa - rotate the rotor back and forth by hand to check), or, the likely culprit... the anti-reverse clutch (could be worn and need to be replaced). The little cylinders in the a/r clutch ride in a plastic housing that can wear over time.... think of trying to reshape a plastic straw after chewing on it. This slight back play isn't necessarily detrimental to the performance, but I'd keep a replacement a/r clutch assy on hand, if I were you. Hope this helps. Keep me posted.

@TSGReelService 3 жыл бұрын

Forgot to mention the gears... hold the rotor and gently turn the handle back and forth.... if there's significant play, the gears are probably worn... you could try shimming the main gear, but that won't always work... the MG and PG should be replaced.

@hownowbrowntrouttasmania7389 3 жыл бұрын

@@TSGReelService Thanks heaps for your reply. There is some movement where the anti-reverse fits into the hexagon shape body. My spinfisher has only ever been used once. I don't know why that one would have play in it as well. I'm guessing its the same problem. My slammer has done a bit of work, not much though. The a/r clutch inside seems good. There is no movement. But there is movement in where it sits into the body.

@hownowbrowntrouttasmania7389 3 жыл бұрын

@@TSGReelService How do you set the rotor nut?? It looks like there is a lot of play just where the rotor nut needs tightening. The gears should be fine because it hasn't done all that much work?

@TSGReelService 3 жыл бұрын

You're welcome and no worries. All those things could affect the rotor play. Not necessarily one in and of itself, but one magnifying on top of the other. Like I said before, the overall performance of the reel shouldn't be significantly affected.

@alexmax9563 2 жыл бұрын

Hello bro! In your opinion, what is the best reel for big, very big tuna, sharks, marlins up to the price of $ 300? Penn spinfisher V 10500, VI 10500, Slammer III 10500, Quantum cabo 120, daiwa bg 8000 ?? If you know any more, please let me know.

@TSGReelService 2 жыл бұрын

Thanks for watching! There's a little misnomer there.... if you're going after very specific fish, especially in that range.... best to get what has proven itself... a Twin Power and not worry about the cost.

@alexmax9563 2 жыл бұрын

@@TSGReelService i need a big big spinning reel.. Over 300 m of 0.50 mono

@christophersmartt6013 Жыл бұрын

You mentioned something about a roller break

@TSGReelService Жыл бұрын

Hi, see the last response. Thanks.

@gonzarb93 2 жыл бұрын

Hello sr, iam looking for a new drone fishing reel with enough line capacity. Actually iam using an okuma Surf 8k and it woobles everywhere when iam getting the line 400meters...this Penn reel will be woobles too? Sorry for mi english have a nice day and thanks for your time

@TSGReelService 2 жыл бұрын

Thanks for checking out the video! These are solid reels and should serve the purpose you seek if you take care of it.

@zachwaddill7801 2 жыл бұрын

An Alvey reel

@petergyore3108 3 жыл бұрын

Hello, When you rotate the reel at 6:22 min I hear an interesting noise. Sounds like reel brake. What is the reason? I have same reel and yesterday I have heard this noise but I cant find the reason. Please help me. Thank you.

@TSGReelService 3 жыл бұрын

The backup dog is the noise.... a spring was damaged.... and changed later in the video.... keep watching to see the discussion about it.

@petergyore3108 3 жыл бұрын

Thanks, I have checked, but my spring is okay, it is not damaged, not broken. And I hear the noise only rarely not always. What is the function this part? Because in the smaller SSV reel you cannot find this unit.

@TSGReelService 3 жыл бұрын

It's a backup for the anti reverse. Your spring could be worn. Try replacing it. If that doesn't help the issue, take it to your local repair shop.

@petergyore3108 3 жыл бұрын

@@TSGReelService Okay thank you. Yes I think the spring is weaker than the new. I try change it.

@TSGReelService 3 жыл бұрын

👍

@MrDonovan1008 3 жыл бұрын

I dont understand everything is correct with my bail but I get no sound. It doesnt even open up all the way.

@TSGReelService 3 жыл бұрын

Thanks for watching. If something isn't working properly, then everything is not correct. Take it apart and put it back together again. Make sure you're not missing any parts.