Penn Slammer III 9500 Fishing Reel - How to take apart, service and reassemble

Рет қаралды 8,514

Күн бұрын

Penn Slammer III 9500 tutorial on breaking down, servicing and reassembling. See below for helpful video chapters, equipment and supply links. If you found this video useful, please show some love by hitting the thumbs up button and consider....
Hitting the Thanks button under the video
or my PayPal tip jar:
PayPal.Me/TSGReel
Amazon links (containing "amzn.to") and eBay links (containing "ebay.us") below are affiliate links. If you purchase ANYTHING through these links, I may get paid a commission. Help fund my future endeavors by using them when you purchase.
AMAZON main page - amzn.to/46qttJS
EBAY main page - ebay.us/3BvTqi
See my community page for links to parts suppliers:
www.youtube.com/@TSGReelServi...
Paper towels I Use:
ebay.us/Hi2pWc (eBay)
amzn.to/48udknh (Amazon)
Gloves I use:
ebay.us/4CDP89 (eBay)
amzn.to/3SeAbgY (Amazon)
Penn Slammer III Large Reels For Sale on eBay:
ebay.us/HIdIk6
Penn Slammer & DX Reels For Sale on Amazon:
amzn.to/3rXAJxf
The mini screwdriver sets I use spin freely in the palm of my hand, which I prefer for speed.
MINI SCREWDRIVER SET (eBay)
ebay.us/QbICC9 (Spinning - Option A)
ebay.us/STpQDI (Spinning - Option B)
ebay.us/xvTFRx (Non Spinning)
MINI SCREWDRIVER SET (Amazon)
amzn.to/3r8NdBF (Spinning - Option A)
amzn.to/43ZpJ0g (Spinning - Option B)
amzn.to/437CsN8 (Non Spinning)
*********************************
Other videos you may enjoy:
• Penn Spinfisher V 9500... (Penn 9500SSV Tutorial)
• Abu Garcia Ambassadeur... (Abu Garcia Ambassadeur 5000 Tutorial)
• Penn International II ... (Penn International II 30TW Tutorial)
• Penn Battle II 4000 Fi... (Penn Battle II 4000 Tutorial)
• Shimano Stradic: Stiff... (Shimano Stradic Handle Knob Refurb)
• Quantum Boca BSP40PTS ... (Quantum Boca BSP40PTS Tutorial)
• Shimano Sustain 4000XG... (Shimano Sustain 4000XG Tutorial)
• Penn Spinfisher 6500SS... (Penn 6500SS Repair & Tutorial)
• Accurate Boss Xtreme 5... (Accurate Boss Xtreme 500 2-Speed Tutorial)
• Shimano TLD 25 Fishing... (Shimano TLD 25 Tutorial)
*********************************
I, generally, use a ratcheting, interchangeable regular-sized screwdriver for the initial loosening of screws. Here's a link to the brand I use:
amzn.to/440Bwvb
Get some additional, varying sizes Flathead and Phillips bits while you're at it.
The adjustable wrenches I use (instead of hex nut wrenches) are Husky, but these (with the red insert) work very well... 6-inch will be used the most:
ebay.us/CKiSM7 (eBay)
amzn.to/3PAbkTT (Amazon)
If you prefer to use hex nut wrenches, I'd recommend angled/offset ones, like these:
amzn.to/44ljUtL
or a pass-through socket wrench set, like this:
ebay.us/ygHAQo
Reel grease I use:
ebay.us/AtmVUv (eBay)
amzn.to/46p4p66 (Amazon)
Drag grease I use (brown for warm weather, purple for cold):
ebay.us/WU7NOh
Oils I use:
ebay.us/RLtGzV (eBay)
amzn.to/3PubkVA (Amazon)
ebay.us/I3NXpx (eBay)
amzn.to/44kjdkz (Amazon)
Ultrasonic Cleaners. 3 liter or above:
ebay.us/olT4J6 (eBay)
amzn.to/3NusJuD (Amazon)
Small parts mesh basket for ultrasonic cleaner:
ebay.us/cmvoe8 (eBay)
amzn.to/3NuycBM (Amazon)
Ultrasonic cleaner additives (use in moderation):
amzn.to/444EaQG (dish liquid)
amzn.to/43bYZIY (heavy duty cleaner)
amzn.to/440wcZ5 (alcohol)
*******************************
Quick links to navigate my channel:
Main Channel: / tsgreelservice
Video Library: kzfaq.info...
Individual Playlists: kzfaq.info...
*******************************
One of the bearing greasers I use... contact Alan directly (non-affiliate link):
alantani.com/index.php?topic=...
Workshop Overhead Light:
amzn.to/44fxbo0 (Amazon)
Chapter timestamps:
0:00 - Intro
0:10 - Handle
6:40 - Spool & Drag
21:41 - Rotor, Bail Spring & Line Roller
32:27 - Body
36:28 - Upper Housing (A/R, Backup Dog, Pinion Stack)
51:56 - Main Housing (Main Gear, Block, Bearings)
#TSGReelService #FishingReelRepair #pennreels #fishingreelmaintenance #fishinglife #reelrepair #fishing #pennslammer #offshorelife #reeffishing
‪@TSGReelService‬

Пікірлер: 50

@TSGReelService 8 ай бұрын

Appreciated the video content? Want to show some love? Hit the Thanks button under the video or hit up my PayPal tip jar: PayPal.Me/TSGReel

@piercel.6845 10 ай бұрын

So satisfy to watch this reel cleaning, I still cant do my own reel cleaning as my hand shake a lot under pressure 😊

@TSGReelService 10 ай бұрын

Thanks for watching! Sorry to hear about your hand shaking.... hopefully, you can get back to being able to do it.

@ryanwillett728 2 жыл бұрын

Excellent video! I've got a penn battle and a penn slammer that were found on the bottom while diving. Excellent video to walk through break down so I can clean them up and use them!

@TSGReelService 2 жыл бұрын

Wow! Nice find! The anti-reverse clutches will need to be replaced for sure. Check out my video library for my video on refurbishing bearings.... you might be able to save them. Hit the thumbs up and spread the word about the channel. More vids to come.

@geoeconomics5629 Жыл бұрын

For applying grease I use elf eyeliner brush Also I wash bearings in diesel fuel or kerosene , put them in a water bottle with kerosene and a shake shake shake,,,

@TSGReelService Жыл бұрын

Thanks for watching and your input! I like the stiffness of the eyeliner brush. Good tip. Spread the word about the channel.

@fischercustombaits 2 жыл бұрын

Awesome job on that reel Barry, nice reel, 👍🏼👍🏼👍🏼👍🏼👍🏼🐟🐟🐟🐟🐟🐟🐟😀😀😀😀😀😀😀

@TSGReelService 2 жыл бұрын

Thanks Jan!

@hownowbrowntrouttasmania7389 2 жыл бұрын

Bloody good reels.:)

@laukei1 2 жыл бұрын

geat educational vid, mate. excellent job, thanks for sharing!

@TSGReelService 2 жыл бұрын

You're welcome and thanks for watching! More vids to come. Spread the word about the channel.

@laukei1 2 жыл бұрын

@@TSGReelService doing it right now

@alexandredobaria9553 9 ай бұрын

Le pouce de je suis satisfait 🐟 👌👌👌👌👌👌👌👌👌👍👍👍👍🎣🎣🎣🎣🎣🎣🐟🐟🐟🐟😃😃😃😃😃😃😃

@TSGReelService 9 ай бұрын

Thanks! Spread the word about the channel.

@alexandredobaria9553 9 ай бұрын

J'aime beaucoup

@TSGReelService 9 ай бұрын

👍

@antoniocouto9190 Ай бұрын

Fantastic video once again, I watch your videos when I work on my reels. I made a bit of an amateur mistake working on my Slammer cleaning my drags and thought soapy water would do the trick:/ the glue holding the drags to the plates gave. Am I able to glue them back on? What type of glue or should I get new ones? Advice much appreciated. Antonio

@TSGReelService Ай бұрын

Thanks for watching, brother! Sorry to hear about the drag washers issue. I use Brake Cleaner on those things when I want to get them clean and never had an issue, so it separating with just some soap and water seems odd. If the carbon fiber is fine, yes you can glue them back on.A thin layer of JB Weld (ORIGINAL) should work fine... just need to put some weight on it for about 24 hours so it can set properly (read the instructions).... just be sure to not have the weight interact with the glue, otherwise, that's where the washer will stay. Hope this helps. Barry P. S. - I would probably just get new ones.

@onemorecastfishing7480 2 жыл бұрын

Great video! I just purchased a Slammer III 10500. I’m looking modify the drag washers to get more low end for bait fishing. Are the Dura Drag washers interchangeable with other drag washers (the HT-100)? Or can I simply remove one of the drag washers to get lower drags out of the reel?

@TSGReelService 2 жыл бұрын

Thanks for watching! I'm assuming you're referring to the lower drag, since that's where the majority of "heavy drag" originates. In theory, you should be able to remove one of the lower end drag with another metal washer, and that should help, but will affect top end drag. You're probably better getting a second smaller reel for smaller fish.

@LGfishingNYC 2 жыл бұрын

Great video. Why do you use a different kind of grease on the drags ?

@TSGReelService 2 жыл бұрын

Thanks for checking out the video! The brown grease is more expensive, and designed to be used with carbon fiber drags. You can use over the entire reel also, if you want. More vids to come.

@234kwon 2 жыл бұрын

thank you for the video. i was told slammer 3s had a design change in the line roller bearing. is that something you can show people how to upgrade?

@TSGReelService 2 жыл бұрын

You're welcome and thanks for watching! Penn changed the bail wire and line roller design. I don't currently have all the parts to show you. You can read about it here: www.mysticparts.com/PennParts/DesignChange/SLA6500.aspx

@wish2fish37 10 ай бұрын

Nice breakdown of the reel…..Have a slammer 6500 that too acouple hard hits on ground.I feels rough now but not sure why.Hasn’t been used a lot.Took it apart and nothing obvious as far bear damage.Thought maybe main shaft got bent but doesn’t appear that way.Rolled it on a mirror to check it.Any thoughts?

@TSGReelService 10 ай бұрын

Thanks for checking out the video. A bent shaft would result in more of a sluggish feel while oscillating. The first thing I would check are the line roller bearings, then the pinion and main bearings. If all those are fine, do a close up check the teeth of your main and pinion gears.... if they're worn, you can try adding some shims to the MG. Hope that helps.

@TheWanderer4171 2 жыл бұрын

God damn this video is a life saver. I’m attempting to rebuild/replace some seals in my Slammer 4500. I noticed some differences in the 9500 but for the most part things seem similar. Anything I should be aware of? Also what is safe to use as a degreaser or cleaner for the internal body of the reel and gears?

@TSGReelService 2 жыл бұрын

Thanks for watching! Glad to hear you found the video useful. Nothing significantly different that I can think of off the top of my head. For cleaning, I would probably just use Corrosion X (or another type of penetrating oil), Q-Tips, a toothbrush and paper towels. It'll be the safest way. More vids to come.... spread the word about the channel.

@TheWanderer4171 2 жыл бұрын

@@TSGReelService awesome man, thanks for the immediate response. This reel would be sent out & I’d be waiting who knows how long if it wasn’t for this video. I’ll share your page on my instagram

@TSGReelService 2 жыл бұрын

You're welcome and thanks for sharing. True about sending it out.... you never know.

@TommyS3119 2 жыл бұрын

Just wanted to tell you how helpful your videos are for me. Excellent and very thorough. I just serviced my Slammer 3 5500 using this video as a reference. One thing I noticed with my reel was the rotor nut, if just hand tightened to much, made the rotor sluggish. I had to back the rotor nut off until it was almost loose before the rotor would spin freely. Is this normal? I put the nut cover over it so it won’t move. I understand if the rotor is tightened to much it can cause the rotor to bind. My rotor nut must be loose for the rotor to spin. I also have a 4500 model, and that reel I can tighten the rotor nut and it still spins freely. Any info or help would be greatly appreciated. Thanks again.

@TSGReelService 2 жыл бұрын

Thanks for checking out the video! I have a smaller version than this 9500 that came in that I'll record servicing today.... should be posted in a month or so. Regarding the loose rotor nut explained..... sounds like you have a pinion bearing issue.... start by replacing the lower pinion bearing to see if that helps. Then go to the upper.

@TommyS3119 2 жыл бұрын

Thanks for the reply. I’m gonna try what you said and see what happens. I’ll just pick up 2 bearings from mystic. The existing bearings look like new, but who knows until I try it. . The only way the rotor even spins is if I hand tighten lightly. I notice the rotor has a tiny wobble also, due to not being able to tighten down the nut. Anyway, thanks again for the advice. Much appreciated.

@silkynormal5034 2 жыл бұрын

Hey mate, love your stuff! Just wondering where did you get those bearing tweezer and what are they actually called? I've been searching for them for a while and can't find them, cheers.

@TSGReelService 2 жыл бұрын

Thanks for watching! Ernie at Bearing Bad. bearingbadtool@gmail.com

@TSGReelService 2 жыл бұрын

Just spoke with him. He said he only has a few left, so you may want to reach out to them as soon as possible.

@silkynormal5034 2 жыл бұрын

@@TSGReelService You're a legend to go for that info for me!! cheers mate, i really appreciate it! I'm over in Australia. Do you think he would ship one by any chance?

@TSGReelService 2 жыл бұрын

@@silkynormal5034 you're welcome and no worries, bud. He ships internationally, but shipping costs might be pricey. Reach out to him via the email and see. Let him know I sent you.

@silkynormal5034 2 жыл бұрын

@@TSGReelService Alright, awesome! I'll get onto him and let you know how it goes mate! cheers!! Oh, if you get the chance to do a dogfight and a stella that would be a awesome vid!!

@piercel.6845 Жыл бұрын

Hi, is this the same as the IV version? I got a 8500, thanks

@TSGReelService Жыл бұрын

Hi, check my video library for the reel model and version you're seeking. It should be there or close. Thanks.

@pattricklogan888 2 жыл бұрын

Hi mate i've just done my slammer and after put it all back i can feel the gear when spinning have u got any idea how to fix that thank a lot.

@TSGReelService 2 жыл бұрын

Thanks for watching! Check out my comments when I'm working on the main gear and housing. Let me know if it helps. More vids to come. Spread the word about the channel.

@pattricklogan888 2 жыл бұрын

Thanks for replying i try follow up all the step i don't over grease them put them all back correctly but still when spinning the handle it not as much grinning but it not as smooth and i can feel them gear mesh.

@TSGReelService 2 жыл бұрын

You're welcome and no worries. For some reason, those reels feel better with a little extra grease on the gears. You can try that first and see how it feels. Still the same? Then try playing with the number of shims on the main gear.

@pattricklogan888 2 жыл бұрын

I will try it tomorrow as it 1am now in western Australia can't push it any more🤣🤣 but thanks heap for your help man.

@TSGReelService 2 жыл бұрын

🙂 no worries.