Perfect low light HyperSmooth on your GoPro

Рет қаралды 3,193

Күн бұрын

Be gone motion blur! Be gone shadow mush! Get crisp low light HyperSmooth stabilisation that works. You're gonna have to do a bit of work for it, but these settings will give you a great start point.
Get GoPro Labs: github.com/gopro/labs
QR Control App (Apple): apps.apple.com/gb/app/qrcontr...
QR Control App (Android): play.google.com/store/apps/de...
Intro: 00:00
GoPro Labs: 01:29
Reset command: 02:18
Why I stick with standard flat/log mode: 02:41
Noise reduction: 03:10
Bitrate increase: 04:20
You need a faster SD card: 04:42
True 24P: 04:56
Minimum shutter speed: 05:33
Wide colour gamut: 06:43
Adjusting in Resolve: 09:58
Conclusions: 14:53
#gopro #actioncamera #hypersmooth #lowlight

Пікірлер: 21

@0dan0 11 ай бұрын

Excellent and accurate explanation for these key Labs features. Thank you from a GoPro Labs developer.

@simonwyndham 11 ай бұрын

Thanks Dan! Glad you liked it!

@BrooklynJimmie 11 ай бұрын

Man.... That was a damn good lesson. Thank you.

@RabiiHayani 4 ай бұрын

Great video we hope make other video explain more about gopro labs and the all setting a bike rider need

@skydiverninetysix Ай бұрын

EXPX is MAX shutter speed. I think what you meant to do is to ensure a high enough shutter speed to minimize hypersmooth "mush" and to do that you need to set MINIMUM shutter speed which is EXPN. Please explain if I am wrong.

@simonwyndham Ай бұрын

EXPX is most definitely the minimum shutter speed (my footage proves this, otherwise the method wouldn't work and my footage would have had motion blur all over in the dark forest). However, these days I use the EXPT command instead, which sets the maximum shutter angle (the higher the shutter angle, the more motion blur, so it's the opposite of maximum shutter speed). I have EXPT set to 3, which gives a maximum shutter angle equivalent to 45 degrees.

@xXadambXx 2 ай бұрын

I didn't understand one thing, if I have WIDE=1 set, should I set WB to Native for it to work properly?

@simonwyndham 2 ай бұрын

No. If you set Wide to 1, you’ll get wide gamut in all white balance settings.

@SigMax71FPV 6 ай бұрын

Lavoro perfetto! Non sono molto d'accordo sul blocco a 180... Meglio 90 secondo me. Ma sono pareri personali. Gli ISO li hai bloccati?

@hiddenhen 3 ай бұрын

do you have to type these commands in or can you select these from the QR app to do this?

@simonwyndham 3 ай бұрын

You generally have to type them into the Labs app, which then creates a QR code that you scan with the camera.

@Mike_Oscar Ай бұрын

What is the best solution for no/less noise without to edit in post

@simonwyndham Ай бұрын

If you want less noise, you can leave the noise reduction setting at its factory default and set the maximum ISO to 100. But, you won’t get low light performance or good HyperSmooth in low light conditions if you do that. The problem with a small sensor camera like the GoPro is that they aren’t low light performers, instead getting their best footage in bright sunshine.

@Mike_Oscar Ай бұрын

@@simonwyndham thats maybe not ideal, my problem is not necessarily night shots but i film more in vlogging type of way where the lighting constantly changes, for example simple stepping inside a taxi gives me grain but outside the taxi is fine, or stepping into a mall or something with bad lighting etc any recommendations for that?

@frosty_soda 3 ай бұрын

I've a stack of Evo Plus microSD card's, are these fast enough for 180 MBITR? (I take it this is mbit read speed?)

@venbeer 2 ай бұрын

The Min shutter speed command does not seem to work for me. I instead use EXPT set to 2 for a min shutter speed of 4x the frame rate (i.e. 1/96 for 24 fps)

@simonwyndham Ай бұрын

Yes, these days I have changed to using EXPT instead, though I have mine set to 3 for an equivalent to a 45-degree shutter angle.

@apoptose1558 26 күн бұрын

When talking about a fast SD card, how fast are we talking about? I tested the 180 bit rate with a SanDisk Extreme (V30, U3) and the recording lagged in a few moments.

@simonwyndham 25 күн бұрын

To be on the safe side, I've been using V60s, but that Sandisk should be fine. There's no harm in going down to 160mbits. You should still get a good result.

@apoptose1558 14 күн бұрын

@@simonwyndham Thanks for responding! I checked again on my more powerful PC and it played the 180 bit recording without any problem. My laptop, however, was not coping with 5.3k 180 bit.