Follow up video for my How To on body lift. Here I tackle the transfer lever issue and relocate the rear bumper. Part 1 to this video. Fitting of body lift blocks: • HOW TO : Pajero body l...
Пікірлер: 22
@andrebots4224 Жыл бұрын
Mate, just a tip to stop & prevent firther rust is spray boiled linseed oil on the chassis, even on rust spots on the body too.
@Xpajun Жыл бұрын
This and your other vidio are great for people wanting to know how to fit the Xpajun Off-Road body lifts - a couple of tips: on the transfer lever, a lot of guys are now taking out the lever bending it forwards either by sitting it in a press and bending it (as close to the ball as possible) or by ctting a 'V' on the front side bending then welding to strengthen it before refitting it -- the same can be done to a manual gear lever as well. Withe the inner rear bumper relocation plates you need only to turn the bottom hole on the bumper bracket into a slot -- this is because the pitch of the holes on the chassis is 40mm while you are lifting it by 50mm - this allows the inner bumper brackets to be secured by 2 bolts each side
@PERTHSCOOTER07 Жыл бұрын
Thanks for the info. It’s a great kit. I’ve bought local kits before, but we’ll worth buying from overseas to get the extra bits you supply in the kit. No issues to date. Definitely recommend this kit to anyone wanting body lift
@on1ytheb3st Жыл бұрын
Lol I have those same exact tires; great Korean made Amazon ATs, 5 years later they’re still holding up great.
@dodgy_garage_4x42 жыл бұрын
Great couple of vids on the lift bud. Well done.
@MrEnglischjules2 жыл бұрын
super thanks. Watched the body lift one a few times while i was waiting for the same 2 inch kit to come from the same place. Hopefully get it lifted in a couple of weeks. Glad you did this video also. He actually GAVE me his Pajero in Dec, a nice 2.8td LWB. As he was in my Delica group (he uses once of those now more) and he saw me struggling with the feral cat rescue (and other animals when needed) As i needed something big enough for the long traps and carriers etc. As my own Delica was off the road for a lot of welding and needed something for the winter snow here in hilly Sheffield... we got not a mm of snow lol. Anyway bought the kit off him a few weeks ago_ I took my Pajero to Polish / Ukraine border in March. Spent some weeks over there working with cats and dogs..various places. And want to go back next month, but this time right across to east Ukraine. So got better wheels, tyres. Just doing some other simple bits. Need to sort dc to dc charger, so can run a 3 way fridge. Rear drawers etc. While March was sub zero each night, June, July will be very hot with storms and flooding etc been told. So diff breathers, snorkel etc. What you see on tv, no matter how bad, until you see it, and smell it with your own eyes (and nose) you cant imagine.. I just worked with animals, but saw the huge ques of woman and children coming over the border. Well got to go and change the fan belts... do a little more before the FA cup final this afternoon... goooooooooo Liverpool lol. cheers
@MrEnglischjules2 жыл бұрын
ah, the Pajero, its an auto (my Delica is a manual...seem quite rare, same 2.8td mid 90s)
@PERTHSCOOTER072 жыл бұрын
Haha. Well done mate. On the subject of setting a car up for touring scroll through my videos. I have one on my NL touring setup
@MrEnglischjules2 жыл бұрын
@@PERTHSCOOTER07 finally got the body lift done, did it over last couple of days... now watching this again for when i do the bumpers up with the brackets..
@PERTHSCOOTER072 жыл бұрын
@@MrEnglischjules good stuff mate. Hope all goes well. I reply on here in pretty good time so if you have dramas feel free to ask for advice. Just put 35” tyres on mine. With the 2” suspension lift and 2” body lift it’s turned into a real beast. Hopefully in the coming months I hope to do a full rundown.
@KimKim-oo2up2 жыл бұрын
Hi sir, may I know where you got the relocation plates for the rear bumper? Thsnk you!
@PERTHSCOOTER072 жыл бұрын
They came with the body blocks from Xpajun in UK
@jimbo5455Ай бұрын
What is the length of the stock bolts mate?
@PERTHSCOOTER07Ай бұрын
@@jimbo5455 from memory they are all slightly different lengths depending on their location. I can see if I have an original laying around to measure
@PERTHSCOOTER07Ай бұрын
@@jimbo5455 just had a look. Sorry I don’t have any of the original bolts
@foadmh18022 жыл бұрын
Can I do the same for my pajero gen 3 ?
@PERTHSCOOTER072 жыл бұрын
No. Gen 3 has monocoque chassis. So you need to do a subframe drop.
@haohkim78222 жыл бұрын
How many inch you lift?
@PERTHSCOOTER072 жыл бұрын
2”. For more info please check out my other video where I install the body lift kit
@haohkim78222 жыл бұрын
@@PERTHSCOOTER07 i bought 6 onch shakle ytd 🤣 if i install 6 inch shakle front wheel have to change axle? Or just lift up by itself?