In this video I restore the solex 1700. The motorized bicycle is the e-bike of the 40s to the 70s this is a two-part series have fun watching. #restoration #asmr #satisfying
Пікірлер: 97
@sasikalapazhaniraja21674 күн бұрын
My French teacher Madam Leandre used this wonderful bike in Pondicherry when she working in Alliance Francais. Bye gone those wonderful days.❤
@leifvejby802323 күн бұрын
I had a 1700 as my daily drive when an apprentice, and I loved the simplicity of it!
@richardrestorations23 күн бұрын
I'll be careful admitting to that might give away your age.
@leifvejby802323 күн бұрын
@@richardrestorations Somewhat, maybe, it was bought second hand. Can't believe it was fifty years ago.
@richardrestorations23 күн бұрын
@@leifvejby8023 Time races from us but the wrinkles race to faces us. that was a poem I wrote 40 years ago😀
@RobertEastman-nx5euКүн бұрын
I bought (same price as a 4 speed bike) mine- brand new in Paris in 1966, rode it to Spain, petrol problems with Spanish fuel, walked it from Barcelona - up to Perpignan (where I could find a shop to fix it), along the Med to Genoa, then north to Turin and then I had to walk it up to the tunnel at Mt. Blanc*, bribed the guard to let me ride it through the tunnel, into Switzerland, Lichinstin(misp.) into Austria - Vienna then north up to Graz where it finally died. I left in a parking lot in Graz and took the train south tio Venice, Greece etc. It was am anmazing machine - I was carrying far too much lugage and so I usualy wound up walking up the moutains, but hell on wheels comng down. * French guards must have heard that I was coming through and were madly waving to get me to stop - yeh sure!
@mauriceclark48704 күн бұрын
I remember Raleigh. Made. One. Of. These. Rollers. On front. Tire. !!!
@rEdf19625 күн бұрын
I remember seeing a 1973 Solex bike sweepstake offer on a Kellogg's breakfast serial TV commercial and associated cerial boxes too. I believe 73 or 74 was the final year of Solex bike production. I was 9 at the time.
@richardrestorations24 күн бұрын
The original Velosolex company was taken over by Renault and then by Motobecane in 1974, and then closed for good in 1988. The machinery to make the S 3800 eventually ended up in Hungary. The last complete bikes made with this machinery were made in 2005-06. The last ones actually had CDI ignitions. thanks for watching sharing your experiences of them, cheers Richard
@markxlАй бұрын
I remember seeing these in France when I was a kid on holiday in the 1960s - I really wanted one.
@richardrestorationsАй бұрын
Watch this video first Mr Bean kzfaq.info/get/bejne/qpuVhbdkl7e7lJs.html
@metalmicky26 күн бұрын
Usually struggling up an incline with a lady of ample proportions dressed in black not assisting the bike by peddling……..
@johnjephcote763625 күн бұрын
Me too. I acquired a good one mid 1960s and bought a new front tyre for it. The friction drive motor proceeded to eat its way into my nice new chunky tyre. I gave up and was given a moped.
@bobkendall180523 күн бұрын
I always wanted one, but went down the NSU Quidkly route as a lad at school was selling one for £ 3.00!
@oriolesfan2463Ай бұрын
I’ll say it again, I love your car!
@aldosorgentini2 күн бұрын
amazing. good work dude!!!
@user-qn3ty8gf7zАй бұрын
Большое вам спасибо) Вы отличный специалист 👍😉
@richardrestorationsАй бұрын
Thanks for watching and for your encouragement😃
@redsable6119Ай бұрын
Boy they sure have come a long way in building bicycles since the 60's.
@richardrestorationsАй бұрын
Top speed of 20 ks my e-bikes got a top speed of 50ks
@TKC1065Ай бұрын
In Japan, the car manufacturer Daihatsu imported and sold Solex in the 1970s. Also, in parts of Europe, the motorcycle manufacturer Yamaha sold and supplied parts in the 1980s. I got a used Daihatsu Solex in Japan, bought parts from Yamaha in the Netherlands, restored it, and rode it. It was slower than an old lady's bicycle. (^。^;) It has been sleeping in my garage since then and I haven't ridden it since. I thought about restoring it again for the first time in 40 years. Thank you for a great video!
@richardrestorationsАй бұрын
Mr Bean riding a solex might bring back some memories kzfaq.info/get/bejne/qpuVhbdkl7e7lJs.html
@franciscodossantos9767Күн бұрын
Parabéns belíssimo trabalho abraços.
@martyw20538 күн бұрын
Loved your video, have restored three of these 1700's over the past 10 years , just a few comments if I may, as someone has already mentioned the main bearing is crimped in, if you don't do this it has a tendency to move out of housing, you will know when this happens as the big end will rub against end cover! Also that motor at some stage has had a new big end fitted as it has a needle roller bearing, original was plane bronze bushing, possibly was replaced with later piston and barrel as well , if so you are in luck as late set up produced a bit more power!! Also none of my 1700's had a coaster rear brake set up all worked on caliper rim brakes front and rear, however could be different I guess from where bike came from, good luck with fuel pump and the throttle valve assembly, cheers.
@ElizabethFranquiEsqАй бұрын
Ahh. That sweet sound of success! Amazing job so far!🎉
@richardrestorationsАй бұрын
Yes! Thank you!
@oneshotme23 күн бұрын
I really like that bike and so far it's looking good I enjoyed your video so I gave it a Thumbs Up
@richardrestorations23 күн бұрын
Glad you like it
@LittleRestorers29 күн бұрын
Phenomenal amount of work. Really enjoyed the whole engine tear down and reassembling. Hope we get to see you taking it for a spin in the next part 😉👍
@richardrestorations29 күн бұрын
Thanks little restorers I'm halfway through the reassembly but unfortunately covid has struck our house so I think I'll be on a go slow for the next two weeks
@LaxpowertooАй бұрын
That's going to run like a winner! I'm halfway through reviving a 1962 Moby AV88. Race?🏁
@richardcorwin1828Ай бұрын
Great job on bringing this bike back from the dead. Now you have the only Zombie Bike in the world!! Fine job sir and thank you for sharing.
@graywoulfАй бұрын
I subbed to see part two of this restoration. ☺
@gregj7916Ай бұрын
Those hands have done a lot of hard yakka over the years, good effort on this little engine…
@richardrestorationsАй бұрын
Haha started off at 16 repairing lawn mower engines' spent couple years assembly Toyota Hilux ,making craft jewelry for galleries , installing kitchens, done a adult apprenticeship to be qualified builder making houses , set up a repair company for earthquake damage houses , and a classic car repair company, in all I've spent 40 years being self-employed, taking on the new challenge to build up KZfaq channel has been pretty hard so far with a lot of cost with no returns so far. Yep so these hands of done a lot and the Brain has been through a lot as well. Thanks for watching and showing an interest in my channel.
@AusterationАй бұрын
*Epic pull down Richard. Would have made a great part 1 and 2 video. Great restoration and interesting piece. Can't say I have seen one of those before. I would have put some oil around those rings though when you put the head back on. Love to see it in action*
@richardrestorationsАй бұрын
Hi it is a part 1 and part 2 ,did you notice I oil the bore before I put the piston in ,I was going to assemble it this weekend but have got covid .such fun 😁
@AusterationАй бұрын
@@richardrestorations oh sorry my bad. I thought the bike at the end was your finished project for some reason 🤪 Yes spotted you oiling the bore. Hope you get well soon. Looking forward to seeing the next part.
@MASI_forgingАй бұрын
Excellent work as always 💖💖
@richardrestorations29 күн бұрын
Thank you! Cheers!
@user-ds6qf2mv1qАй бұрын
Афигеть. На то время вертилятор, центробежное сцепление, золотник вместо лепестка, свет...
@richardrestorationsАй бұрын
There's a gang that goes around on these solex going to cafes and they're called the gray beards😂
@gregwilliams38629 күн бұрын
They're a fun ride.
@rutikuiwa7133Ай бұрын
Excellent job 👍👍👍
@richardrestorationsАй бұрын
Thanks mate for watching👍
@user-qh5hz4rp9t28 күн бұрын
Судя по тому, что прокладки не ставятся, он не будет запускаться 😊
@richardrestorations24 күн бұрын
Yes there was gaskets installed, and it did run on the bench test run, halfway through reassembling the bike ,but I've had covid so it's slowled down a bit sorry for the delay
@vincentbellamy12 күн бұрын
Vous voilà heureux propriétaire d'un vélo Solex . Mon premier tour en vélo avec moteur était un solex celui de mon père c'était début des années 1980. J'ai donné à un collectionneur des bidons de Solexine. Here you are happy owner of a Solex bike . My first lap in bike with engine was a solex that of my father it was early 1980s. I gave a collector cans of Solexine.
@ashleysmith310629 күн бұрын
Finally ! An honest restoration with appropriate tools ( not some clown with pliers, hammer and screwdriver being used as a cold chisel !) My mate had one of these in the 60's; very temperamental until I replaced the condensed for him. ( I had a lot of experience rebuilding Villiers motors ) Brings back memories ! Excellent videoing and editing ! What did the Harley Riders think of it ?
@richardrestorations29 күн бұрын
Thanks for watching and for your comments appreciate it , the Solex next to the bikes it's not the one I'm working on however one of them did have a ride of it the other guys were laughing their heads off , was hoping to get the other video out of assembling the bike out next week but have got covid in the house, such fun
@ajlacostewm28 күн бұрын
My 83 year old great great grandma had one in france .
@richardrestorations24 күн бұрын
Has She still got it
@ajlacostewm24 күн бұрын
@@richardrestorations that was 40 years ago sadly.
@witchfinder40120 күн бұрын
My mates dad had one back in the 60s, i couldn't stop it and crashed into a wall. Though my motorcycle career i always remember that crash and rode more cautiously. It hurt..
@richardrestorations15 күн бұрын
Yep lovely bicycle brakes onto the rims always stops you fast
@arthurcooper65648 күн бұрын
They didn't have any spiders back then
@shakeel455213 күн бұрын
you can rotate the bore to remove piston 22:57
@xls5497Ай бұрын
I am born 1960 and would like to purchase this Solex
@GoingtoHecq12 күн бұрын
Those are some very crow like crowbars.
@olivierpissard65095 күн бұрын
Le Solex. La 2cv des Vélomoteurs Toute une Époque. Existe aujourd'hui en version électrique. Le Solex , est toujours fabriqué . Mais plus en France. En Asie , je crois !?.
@RonaldoSilva-tn8inАй бұрын
Restaurada bicicleta elétrica 🚲😉
@richardrestorationsАй бұрын
Haven't come across any old electric bikes restored yet
@russwabuda155610 күн бұрын
too many mistakes. sad, it should have been good.
@js702826 күн бұрын
Bravo
@altairdesouza936829 күн бұрын
Bom vídeo! nas antes de fazer a desmontagem eu faria uma lavagem com água, desengraxante e detergente para tirar a sujeira pesada.
@richardrestorations29 күн бұрын
I appreciate what you're saying, but it wasn't that dirty and if you look at a lot of the other "restoration videos "they have a lot of " painted on Rust" I don't believe in that
@altairdesouza936828 күн бұрын
@@richardrestorations O importante é trazer essas relíquias de volta. Parabéns!
@user-nx8ii4ef7fАй бұрын
I remember seeing so many beautiful ladies in Paris in the 1970's riding petrol bikes!!
@richardrestorationsАй бұрын
I can assure you I don't look beautiful on it😜
@user-nx8ii4ef7fАй бұрын
@@richardrestorations Hahaha!
@thomassieberg805914 күн бұрын
Never ever cut any screws of a Solex. ALL are specially formed and u have to use ONLY ORIGINALS to get it stabile !!!! It s ur life on the saddle !!!!
@mrwest5552Ай бұрын
spiders all said : you stickin' around ? hell no, i'm out see ya.
@richardrestorationsАй бұрын
Quite often when I pull stuff apart it's full of spiders luckily we don't really have poisonous spiders in New Zealand😱
@mrwest5552Ай бұрын
@@richardrestorations - good - when i do, i try to be outside and say "run for the hills you".
@user-re5mj9ww9o7 күн бұрын
А что же кольца не поменял.
@guzziwheeler28 күн бұрын
How did you refit the big crankshaft bearing which you forced out of it crimped seat? Why did you not replace this crucial € 5.- part? This motor will not last.
@richardrestorations23 күн бұрын
Thanks for your feed back cheers Richard 😀
@attilatamas489715 күн бұрын
Will this work? Next video? When???
@richardrestorations15 күн бұрын
Sorry
@marcusharmon838927 күн бұрын
Reminds me of the ex mrs
@g-r-a-e-m-e-26 күн бұрын
Ulez?
@glennmoreland6457Ай бұрын
Most french ideas can be considered cheap and nasty... No exceptions with this thing... It'll be interesting to see how it handles whilst riding it... 😐🏴🇬🇧😐
@richardrestorationsАй бұрын
For a bad idea they did sell 8 million of them, can you give me some stats on the English ones sold, thanks mate
@user-lg7vx6xp1oАй бұрын
Yes, I had one of these bikes before.. Now I see the important.. Why they made it a girl's bike?. In if they made it a boy's bike.. Which a lot of young men use these motor bikes.. Make an it a girl's bike.. You never know when that change set rotates the back wheels.. Might break when you're going up a Hill up 45°.. Had a really Closecall with a big dumpster. was a big one.
@richardrestorations29 күн бұрын
I can assure you these do not go uphill ,and I must admit I'd rather look at a girl than a guy on these bikes, glad you the survive the dumpster to be with us, thanks for watching
@revaldoaldo718624 күн бұрын
Mbah kung pernah punya
@richardrestorations23 күн бұрын
Thank you for taking the time to watch my video and leave a comment. It means a lot to me!
@rogerpatrongonzalez580025 күн бұрын
🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍
@richardrestorations24 күн бұрын
Thanks for the encouragement😃
@nodink517028 күн бұрын
When i was 14, my teacher in Vietnam has this god awful bike. It was like you wouldn't want to touch this. Nobody wants it. Nobody would buy it. It was the WORST bike in the world. 99.9% people ride Hondas or suzuki or yamaha. But my teacher he was an OG, his hairs was perfect, a 100mph wind wouldn't mess it. One day, he shows up at my house. Turn out, he's a friend of my dad.
@richardrestorations24 күн бұрын
Sometimes things are so uncool they become cool, thanks for sharing your story, cheers Richard
@benino121 күн бұрын
Is a French made : Solex
@siticharohcharoh486628 күн бұрын
gk jelas
@richardrestorations24 күн бұрын
Part 2 of the videos coming out shortly sorry I've had covid so it slowed me down a bit,
@blattimus26 күн бұрын
I had one of those when I was a kid in the 1980’s! Somebody gave it to me, so I fixed it up and rode it around my suburb for a long time. Then I got pulled over by the cops who threatened to tow it and give me a ticket, so I quit riding it.
@richardrestorations24 күн бұрын
Yeah I got pulled up in the 80s I ended up getting a faster bike Kawasaki triple 2-stroke😱