Peugeot 307 not starting. Faulty key/transponder, immobilizer fault. Fault finding and repair.

  Рет қаралды 319,406

LM Auto Repairs

LM Auto Repairs

7 жыл бұрын

Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
This car came to me as a non runner with an apparently immobilizer fault.
On an attempt to fix it, someone has replaced the engine ecu and the under hood module.
On this video I take you through the diagnosis and thinking process to find the fault and repair it.
Hope you enjoy the video.
Any questions please put them below.
Like always, thank you for watching!

Пікірлер: 308
@lukaszkierownik
@lukaszkierownik 7 жыл бұрын
Everything is very well explained. I had this problem 1 year ago and solved exactly like You.
@husseinolivia2548
@husseinolivia2548 7 жыл бұрын
It's great to see your videos again I really miss to you
@LMAutoRepairs
@LMAutoRepairs 7 жыл бұрын
Hussein Olivia Thanks... Easter break.... 😉
@forex9ja180
@forex9ja180 6 жыл бұрын
Thanks man for your time, I will try all the options available and get back to you on whatever that works.
@jameschinedu4068
@jameschinedu4068 2 жыл бұрын
Thank you very much to enlightening us, on how to deal with Peugeot anti-theft
@LMAutoRepairs
@LMAutoRepairs 2 жыл бұрын
😊 👍👍👍
@karimmimic1726
@karimmimic1726 7 жыл бұрын
i give a like allways before watching the video. we missed you brother
@LMAutoRepairs
@LMAutoRepairs 7 жыл бұрын
karim mimic Hi Thank so much, is really appreciated! Thank you for watching and follow the channel...
@Freedom_fighters898
@Freedom_fighters898 2 жыл бұрын
You have earning yourself a Subscriber!
@LMAutoRepairs
@LMAutoRepairs 2 жыл бұрын
😊 Thanks!
@OneAuto
@OneAuto 7 жыл бұрын
Great job, well done 👍
@LMAutoRepairs
@LMAutoRepairs 7 жыл бұрын
One Auto, Thanks Mr. Rob...
@yervantkhachadorian7371
@yervantkhachadorian7371 7 жыл бұрын
One of my favorite jobs I like t do, great job and as I rote before I like the professional way you're working
@LMAutoRepairs
@LMAutoRepairs 4 жыл бұрын
Thanks!
@benking9503
@benking9503 5 жыл бұрын
These cars can tell you if it's a key problem in 2 seconds, if you use a authorized key and switch ignition to off and leave the key in ignition in off posision, then open the drivers door, the car will continually beep with the notorious Peugeot beep, to alert you you have left the key in the ignition, however if there is no beeping with key In and drivers door open, this is because the car does not recognise the key and so the car thinks there is no key there for no need to activate the alert beep
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
Hi Possibly... never tried it. Thank you for watching and for your comment!
@benking9503
@benking9503 5 жыл бұрын
@@LMAutoRepairs It's true, it happened to my neybour, but I didn't want to get into it all with him in case it wasn't that and he started getting annoyed with me, because he is not very intelligent, so he had it towed to Peugeot and he told them what I had said and it turned out to be exactly what I said nothing more nothing less
@benking9503
@benking9503 5 жыл бұрын
@@LMAutoRepairs He had another mechanic here who sprayed 2 tins of easy start into the air intake until I could smell it coming from the exhaust, any mechanic would know that is now a electrical fault and not fuel delivery and stop after 2 or 3 squirts! I asked the mechanic some questions which he didn't have answers for, then told my neybour to tell the mechanic to go home as he doesn't know anything and is damaging the car, he did just that and sent the car to Peugeot where it was discovered I was correct about the key
@tonysoprano9370
@tonysoprano9370 5 жыл бұрын
Thanks for this. Will try it when I get the car back
@mileglavash
@mileglavash 3 жыл бұрын
Thanks you man, you helped me to not being late on work today
@kiltedmonster1
@kiltedmonster1 7 жыл бұрын
Another great Vid wish you were closer i have a brake light problem :(
@mrgrumpy5116
@mrgrumpy5116 4 жыл бұрын
another good job .. thanks for the video
@LMAutoRepairs
@LMAutoRepairs 4 жыл бұрын
👍👍
@Juulbakker33
@Juulbakker33 5 жыл бұрын
Very intresting thank you!
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
Thanks! 👍👍👍
@lustfulvengance
@lustfulvengance 5 жыл бұрын
You know it's funny, I work on cars in the United States in Florida to be exact, it's interesting to see the exact same crap happens across the pond where people really don't know what they're doing and they just throw parts that a problem instead of educating themselves and actually diagnosing the fault! It's also interesting to see that the junk yards there use the exact same yellow paint marker to mark their parts as they do here in the states 🤣🤣
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
Lol... Indeed... the yellow paint is universal...😋 And yes... a lot of place don't like to waste time diagnosing... it is easier to just throw parts in the hope that fixes the problem, in the end, they will find a way to make the customer to pay for those unnecessary parts...🙁 Thank you for watching and for your comment! 👍👍👍👍
@jameschinedu4068
@jameschinedu4068 2 жыл бұрын
Hi I am impressed you are doing fine
@LMAutoRepairs
@LMAutoRepairs 2 жыл бұрын
Thanks! 👍👍👍
@hbenred1384
@hbenred1384 7 жыл бұрын
thank you, i alwayse learn something from your videos
@LMAutoRepairs
@LMAutoRepairs 7 жыл бұрын
hben red Thank you!
@geoffreyrawlings9736
@geoffreyrawlings9736 7 жыл бұрын
good video easy fix if know we're to look.thanks
@LMAutoRepairs
@LMAutoRepairs 7 жыл бұрын
Geoffrey Rawlings Thank you... Always check the basics first...
@sadikmamoun2847
@sadikmamoun2847 7 жыл бұрын
thanks for sharing
@LMAutoRepairs
@LMAutoRepairs 7 жыл бұрын
sadik mamoun Thank you for watching and for your comment!
@madisinghateh2380
@madisinghateh2380 2 жыл бұрын
Thank you, how i wish I saw this earlier, my car got the same problem and we tried everything and it didn't work and the mechanic end up changing the fuel pump and injectors to but not electric injectors, The car is running fine now but the economy mode keeps coming on every now and then and shutdown the the lights and windows
@LMAutoRepairs
@LMAutoRepairs 2 жыл бұрын
Battery... make sure the battery and the charging system is working properly... 👍👍👍👍
@NewLevelAuto
@NewLevelAuto 7 жыл бұрын
4 weeks for Easter break? Much too long to wait for a video 😁
@manuelcaballero2935
@manuelcaballero2935 5 жыл бұрын
Hi Luis. Greetings from Spain. Nice video. Just for info: The fusebox underhood, is called BSM (engine service box, in french:boîte de service moteur). I know that is an old video and maybe now you know how is called, but could be good for your followers.
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
Indeed... I just keep forgetting all the acronym... working with so many different makers I get all confused sometimes... But thank you for the clarification! And for watching! ☝️☝️☝️☝️☝️☝️
@roberthorwat6747
@roberthorwat6747 6 жыл бұрын
Top job :)
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
Robert Horwat Thanks!
@alanbendell5986
@alanbendell5986 6 жыл бұрын
Great video. Do you have a vid of you repairing a pcb? . I would find that very interesting.
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
Hi Thank you for watching and for your comment! kzfaq.info/get/bejne/g9x7hseb27LPn4E.html kzfaq.info/get/bejne/acdgfLdptpyno4U.html kzfaq.info/get/bejne/hcmlpMSTmcy2emQ.html kzfaq.info/get/bejne/q7CVbNuEzqfbp4E.html kzfaq.info/get/bejne/b6qPe7qJ1bmmh5c.html kzfaq.info/get/bejne/abCZnZyeyb7dhH0.html Might have a few more... have a look through...
@abdulganiyuhamza7810
@abdulganiyuhamza7810 4 жыл бұрын
pls i didnt understand did you change the trasponder with out any proggraming if so pls let me know thanks
@ruwanthifernando7231
@ruwanthifernando7231 3 жыл бұрын
Hi My Friend, Thank you for taking trouble and time to present your great video, I too have a problem with my 307sw 2.0HDi 136hp engine with error code P2670 reads Actuator suplly voltage B circuit low , and it's not starting. after fully charging the battery, when ignition is switched on, it displays "economy mode active "and doesn't start . Would you advice me what to looked at please? Thank you
@LMAutoRepairs
@LMAutoRepairs 3 жыл бұрын
Check the voltage feed to sensors etc... sound like a voltage is missing... That could be a broken wire, or something else... As for the economy mode, that will not prevent the car from starting, it will go away as soon as it starts... Thank you for watching!
@nishantharajaratnam8028
@nishantharajaratnam8028 7 жыл бұрын
Great videos bro could you able to put a video about how to rest ECO mode on Citroen and Peugeot please
@LMAutoRepairs
@LMAutoRepairs 7 жыл бұрын
Nishantha Rajaratnam Thank you for watching and for your comment! What do you mean... they usually come out from economy mode as soon as the engine is started.... Unless has been enabled in the BSI...
@nishantharajaratnam8028
@nishantharajaratnam8028 7 жыл бұрын
thank you for answering bless you. Yes i saw the video on youtube says that when the engine starts it will go but my case is engine not starting i got the same problem 3 different citroen cars two C3 one xsara picasso car was running fine fuel runout when i start not starting then i filled the fuel and start not staring went to eco mode .C3 I left the key ignition on for few min its went to eco mode now not starting
@bogdan6755
@bogdan6755 2 жыл бұрын
I have one with the same problem but the key have a solid chip
@moneypenny6202
@moneypenny6202 Жыл бұрын
Why did I buy this car
@auvaacaseyniteshine5673
@auvaacaseyniteshine5673 7 жыл бұрын
Where do you located? Great video.
@adamcrane7732
@adamcrane7732 4 жыл бұрын
Good morning
@LMAutoRepairs
@LMAutoRepairs 4 жыл бұрын
Good morning!
@JensThomasNepper
@JensThomasNepper 5 жыл бұрын
Hello sir..perhaps you can give me advice about my Peugeot 206 1.4 HDI...the starter is turning the engine,but there is NO electrical working in the car,no lights at all..There is a clikking sound from under the fusebox in engineroom,,could it be a relay or something sitting under the fusebox.All the fuses looks okay...Thank for good channel.keep up the good work.
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
Hi If you have no electric systems, most likely will be more than just a relay... Can you scan/access to any modules? Thank you for watching!
@milankoppl4667
@milankoppl4667 Жыл бұрын
good day, can you please advise me, the car does not start and shows an error code F4BA THANKS FOR THE ANSWER
@brunosimic9043
@brunosimic9043 4 жыл бұрын
Hi! I have problem with my Peugeot 407, and I really need help. I'm desperate. My central locking doesn't work properly, or the keys, or the BSI, I don't know anymore. I SUSPECT THAT THE BSI IS THE PROBLEM! The problem is that the car seems to contantly "keep forgeting" the keys. So the situation is next, I've tried to make a BSI reset multiple times, successfully. After that, keys still don't work. When I turn ignition on, and hold lock button on the key for 10 seconds (syncronizing), after that key is working outstanding!!! After that, as soon as I lock the car, and wait for around 3,30 minutes, again keys will not work. There is few other problems: 1. kilometers on my trip computer (on the radio) are stuck on 1988 km, they are counting normally from 1988 km every time I start and drive the car, but every time when I reset trip to 0 and leave the car, after around 3.30 minutes, kilometers are back to 1988 km. 2. my fuel gauge is not working properly, when the tank is full it shows around 15% less fuel, 3. drivers seat heating isn't working. On top of that there is one major problem. When is hot weather outside, my car simply turns off or cuts off when driving. After that I can normally start the car and drive it. It can happen anywhere, anytime and multiple times. There is no rules. But only during hot and summer weather. In winter or cold weather everything is just fine. People are telling me that the problem is in BSM (FUSE AND RELAY BOX) under the bonnet, some kind of contact in the BSM or so.. Please can you help me? Did you had similar cases?? Thank you in advance ! Greetings from Croatia
@selebshuelse4564
@selebshuelse4564 7 жыл бұрын
Great video, very informative. Whats the name of the computer software you used to check the car statuses? Thanks :)
@LMAutoRepairs
@LMAutoRepairs 7 жыл бұрын
selebs Hu else Thank you. Is called PP2000
@taiwofincH
@taiwofincH 7 жыл бұрын
Hi imsvvavr ,,,,,Sure u are good!!!we finally found that an Electrical sensor(not Absolutely sure What is called now)just somewhere beneath the fuse box in the bonnet somewhere Above the front left Tyre is what has made my car not start ...its just a contact problem as we stumbled on it and then the check engine light came up and my car starts now. The problem was with a small device located further down the Ecu its was unbelievable that just a tape could fix a problem that has made me sleepless for many nights..... I hope u get my Explanation.
@samuelemmanuel8509
@samuelemmanuel8509 6 жыл бұрын
please I need the name of the sensor pllllllllsssss.....
@bec2719
@bec2719 5 жыл бұрын
great video mate, i have problems with my citreon dispatch, power steering and other electrical issues, any ideas ?
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
Hi I am not a wizard... lol Have you scanned the car? Thank you for watching!
@crpth1
@crpth1 4 жыл бұрын
Bec - For what it's worth the Citroen Dispatch, like any other vehicle, need to have a perfectly decent battery and good electrical contacts. Namely ground connections. ;-) Make sure those two are impeccable and by far and wide most of the electrical "gremlins" will vanish.!
@robinsfishingadventures4489
@robinsfishingadventures4489 6 жыл бұрын
You sound like you know what you're doing, don't suppose you could give me any suggestions? I’ve recently bought a Peugeot 206. It was not full working order, but then it snowed, and I didn’t drive it for a week. I got snow under the bonnet when I checked the oil. There was also a light unplugged, which I plugged back in. But now the car wont start, not even crank. I bought a new battery, and the central locking went when I connected it, but the car still won’t make a sound. Dash doesn’t turn on either. Everything seems to look fine, I have no idea what this could be. Any suggestions please? Thank you
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
Makenna and Robin Moss Hi Check ground connections... have you checked the maxi fuses, under the BSM?
@yasminadupreez603
@yasminadupreez603 2 жыл бұрын
hi there I been watching your video on Peugeot307 2000 i have a 2008 my car just stop starting and my immobiliser battery is flat the car is craning but will not start what do you think the battery is a problem.
@LMAutoRepairs
@LMAutoRepairs 2 жыл бұрын
What battery are you referring to? Scan the car, and go from there... 👍👍👍
@officemail5559
@officemail5559 3 жыл бұрын
Any knowledgeable experts help with this please? We changed the battery on our Peugeot 5008 ( 2010) but now it won't start with this new battery!! It just clicks although power is there! Thanks in advance. Pam
@jix177
@jix177 7 жыл бұрын
Nice work. The Zedbull is a nice tool - but why did they make it look like a kids toy?!
@LMAutoRepairs
@LMAutoRepairs 7 жыл бұрын
jix177 Indeed... lol
@ady1234uk
@ady1234uk 5 жыл бұрын
Have you ever had the issue with no power getting to the injection relay and taking about 20 cranks to start but after it started it's fine all day
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
Not really... But are you sure that that is the problem? Does not make much sense that there is no voltage on the first start only.... Thank you for watching and for your comment!
@taiwofincH
@taiwofincH 7 жыл бұрын
wow!!!great video ...... my 307 (2014)cranks but will not start ,,,its starts after i leave it for hours then it wont start after i drive it long distance.very unpredictable!The rave counter, temperature gauge and A/c works and then stops intermittently as i drive through the day.I noticed it always starts if the check engine sign comes up after ignition but wont start if the check engine sign doesn't show. kindly suggest what do do.
@LMAutoRepairs
@LMAutoRepairs 7 жыл бұрын
Taiwo fincH Hi If the engine light does not come on and the car does not start, it is probably that the engine ecu is not being seen by the other modules... but hey, this is just a guess... so it might be that you have a problem with the network... Have you scanned the car?
@taiwofincH
@taiwofincH 7 жыл бұрын
Hi imsvvavr !!!U impress me alot with ur depth!!!I Have watched this video 3 times now and i seem to know what is wrong with my Car but first i will scam and get back to you!!!U are on point!!!
@taiwofincH
@taiwofincH 7 жыл бұрын
Hi imsvvavr !!!U impress me alot with ur depth!!!I Have watched this video 3 times now and i seem to know what is wrong with my Car but first i will scan and get back to you!!!U are on point!!!ooops !!
@markjonas8913
@markjonas8913 4 жыл бұрын
Great video.. maybe you can help me with my 2005 Peugeot 206 1.1 Petrol. Not always starting, immobilized... had the key tested, said all good, no faults in the system. Sometimes takes 5 try’s to start. Immo blocking ... can you give me some advise.. thank you
@LMAutoRepairs
@LMAutoRepairs 4 жыл бұрын
I would start by checking ground points... etc... Check for connections etc... Thank you for watching!
@vj2800
@vj2800 6 жыл бұрын
Great job. Do I need to reprogram start&stop capacity in Citroen c4 after changing it? Thanks
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
V J Good question... I can't answer that one... I would no... but don't take my word for it... Sorry if I could not be much of a help... Thank you for watching!
@vj2800
@vj2800 5 жыл бұрын
LM Auto Repairs Thanks anyway for replay, also thanks for your videos. I am learning something from them. Don't know what was the reason that one side of headlights and one side of side rear light not working. Rear top middle brake light not working as well. I checked electric diagrams and its look like the one relay or transistor on BSI is responsible for this. Should I remove BSI and check or repair it? The car had an accident and start&stop was not working, battery was not charging. So I replaced start&stop, battery is charging now. But I have problems with lights. Thanks
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
V J It is possible... that the accident have shorted something that damaged the BSI... Open and inspect... you have nothing to loose really...
@vj2800
@vj2800 5 жыл бұрын
Checked the BSI. It's got no faults. Is there relays fault? Where to find them? Thanks
@Freedom_fighters898
@Freedom_fighters898 2 жыл бұрын
Your old school type guy not many left.. basic is the best. May I ask where you about in UK? I have Peugeot Partner Teepee not starting. I parked and switch off when I tried to start not even cracking nothing.
@alphadogsgamers6912
@alphadogsgamers6912 5 жыл бұрын
Can anyone help, I changed the starter motor as It was an intermittent start and now it just won't start. I have a feeling it's the starter relay. But can I find it lol, anyone can you tell me where it is, also if I change it will I have to change anything else?
@chrisogorman1756
@chrisogorman1756 2 жыл бұрын
Hi, Any chance you have a video of an engine ECUfault repair
@LMAutoRepairs
@LMAutoRepairs 2 жыл бұрын
Not sure what you mean... I have repaired a few ecus in past... search my channel... 👍👍👍
@davidsmyth9067
@davidsmyth9067 4 жыл бұрын
Hello I’ve nearly the same problem with my 207 I’ve replaced the engine bay fusebox but still just a clicking from the fusebox in the engine bay and only one click from the passenger side fusebox too. I then found of after running a ground from the ecu to the car body the engine bay fusebox stopped clicking and the inside fusebox only let one click off now but still no crank. It’s recognising key as the dinging when u open the door with the key in the ignition unless it is a immobiliser problem I’m totally stuck
@davidsmyth9067
@davidsmyth9067 4 жыл бұрын
I also found two wires that go to the ecu that had rubbed through right beside each other making me think they have touched and shorted the ecu out
@LMAutoRepairs
@LMAutoRepairs 4 жыл бұрын
Hi Have you scanned the car at all? Otherwise is guess work... Thank you for watching!
@davidsmyth9067
@davidsmyth9067 4 жыл бұрын
LM Auto Repairs I’ve came to the conclusion the imobilizer has quit and had a scan by my scanner it doesn’t respond at all
@LMAutoRepairs
@LMAutoRepairs 4 жыл бұрын
@@davidsmyth9067 Have you checked fuses etc?
@davidsmyth9067
@davidsmyth9067 4 жыл бұрын
LM Auto Repairs yes checked fuses going to get ecu and bsi fuse box and key as car has rubbed through two wires on the ecu and possibly shorted ecu out so going with that and everything isn’t opening when start positioning is active like signal to starter or fuel pump or the rest all leading towards a ecu or bsi problem as I think I left the key in the ignition when removing and reinstalling battery as well so most probably damaged one of the units
@user-su1bi8xx9d
@user-su1bi8xx9d 2 жыл бұрын
Hey, my key fob broke for Peugeot 307 (one of the buttons broke off on the electric chip) so I ordered a new fob online. I changed the blade over but car is not recognizing the new key fob and saying antitheft. If I hold the old key chip near the ignition it will let me start... But I cannot work out for the life of me how to pair the new key. I've seen some BSI reset things online and also tried clicking fob for 10 secs (including with old chip.. but don't think the old circuit is complete with missing button so not working). Any ideas how I can pair the new key??
@LMAutoRepairs
@LMAutoRepairs 2 жыл бұрын
You will only be able to program the new key with a capable tool... Not by pressing buttons etc... You also need the car pass... if you don't have it, you need to get it from the dealer... That said, there is tools capable of programming it without the pass, as they are capable of retrieve the pass from the car... Hope that helps... Thank you for watching!
@CHY330
@CHY330 Жыл бұрын
Hi, I wonder where you are based. I may have similar situation for my peugeot 3008 in Borehamwood.
@hunter406v6
@hunter406v6 7 жыл бұрын
The underhood module - it's BSM :)
@LMAutoRepairs
@LMAutoRepairs 7 жыл бұрын
Silent Killer a.k.a Lucifer Thanks... I couldn't remember when recording.... ;)
@dylonsingh2439
@dylonsingh2439 4 жыл бұрын
Urgently wanting my Peogeot 307 2003 model 2L petrol engine to get it running again
@andilemlotsa-ginindza8718
@andilemlotsa-ginindza8718 2 жыл бұрын
Please help me with my car it wont start after we changed the radio
@hunk2493
@hunk2493 2 жыл бұрын
Hi. I have a peugeot partner I programmed a new key it starts the car but does not re sync for the remote locking/unlocking. Iv done the procedure of re syncing. Is the coil transponder the one controls the remote thanks
@LMAutoRepairs
@LMAutoRepairs 2 жыл бұрын
Was the key an aftermarket? I had issues in the past with the aftermarket or really low cost keys...
@hunk2493
@hunk2493 2 жыл бұрын
Yes it's from ebay
@shingokit6063
@shingokit6063 Жыл бұрын
i had an issue: Engine immobilizer fault. i am not able to start the engine (cranking but not able to start). Push the car to the side. Waited for 15 minutes. It able to start again. I worry it will happen again because this is not the first time i encountered. What else should i check?
@LMAutoRepairs
@LMAutoRepairs Жыл бұрын
Scan the car first... Hopefully will have logged faults that will point you in the right direction! 👍👍👍
@ferdibester2943
@ferdibester2943 5 жыл бұрын
Good day i have seen alot of your videos im from RSA i have a Peugeot 206 cc cabriolet coupe 1.6L the engine mounting broke of and i hand problems with the starter clicking(after a few click it will engage and start as normal) sound when i repaired the engine mounting i send the starter in they repaired it fixing Bendix drive shaft and changed the solenoid after i installed it i turned the key to on position and try to start but nothing happed took out the starter saw they connected the one wire wrong i reinstalled the starter same thing if i take a wire from the starter at the small trigger wire point to tap on the +battery it starts other faults after changing the starter roof doesn't work windows doesn't work and the weird thing is the hazard works sometime and then not and this bounces my brain cause the hazards should always work any idea what this could be so the main problem is the ignition doesn't activate the starter(i am using my spare key for a while now )
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
Hi It difficult to say anything without risking to give you misleading info... Check wiring, plugs etc... Scan the car... see what the modules are reporting... Thank you for watching and for your comment!
@jacobester4046
@jacobester4046 5 жыл бұрын
@@LMAutoRepairs thx for the reply i checked all fuses wiring took it to a mec that did my starter(at first when i did install it the wire on the starter was on the wrong point ) the mec did their thing and said their is no error codes and told me the yellow wire at the ignition is not getting power (weird) could the starter burned my BSM Fuse box under the bonet cause the wire was on the wrong point on the starter (he says if he bridge the wires at the ignition it starts but still the roof windows, hazards lights still dont work now im being charge a fortune and it all did work before the starter change i think it is there starter that they reconed for me cause its a different solenoid that they put on my starter so i think i must get a starter some were and then test it thank you for the reply i know if you had the car you would of sorted it out in 10min
@Deadwind
@Deadwind 4 жыл бұрын
Where can you get the Peugeot planet system software and cable?
@LMAutoRepairs
@LMAutoRepairs 4 жыл бұрын
EBay for example... Cardiagtool.co.uk Buy at your own risk! Thank you for watching!
@sharonryan6723
@sharonryan6723 2 жыл бұрын
Thanks and how it still available, I have a Peugeot 307 convertible it's starting and then knocking out unless I drive now on the screen it's coming up anti theft fraud and, now my key did open a few weeks ago but I fixed it, so now I don't no what's up, if you could please help me I'd be very grateful.
@LMAutoRepairs
@LMAutoRepairs 2 жыл бұрын
When you opened the key, have you not lost the transponder? It is a small black rectangular ish chip... I seen where people are not aware or it, and loose them... Carefully open the key again, if that is missing you have your answer.... Thank you for watching!
@willewilliamsson292
@willewilliamsson292 5 жыл бұрын
Hello sir greetings from Sweden. I have a 2007 (facelift) 307 1.6 petrol that after have been standing in two months won't start or even crank. It just gives a quick crank for 2 seconds and then shuts of. I've tried with jump leads but no help. The car is making the beeping sound when the key is in ignition and a open the door and no problem with locking and unlock. Thank you
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
Start by checking fuses, relays etc... if you have the means, scan the car and go from there! Thank you for watching!
@willewilliamsson292
@willewilliamsson292 5 жыл бұрын
Ok so there is No Easy way to just go by the imobilizer and get it to at least crank. It just cranks for 2 seconds and gives the same respons every time I try it. So clearly a electronic fault but what. I'm a little bit of stranded in the middle of the winter far away from any workshops and have no scaning tool. Thanks for the reply
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
@@willewilliamsson292 If was and immo issue, you should have the immo light in or flashing when the ignition is on... I can't advise you any further, based on your description of the problem alone...
@crpth1
@crpth1 3 жыл бұрын
@@willewilliamsson292 - From your basic description it seem to point to battery/cables related issue. Loose/corroded terminals would be my first port of call. Totally compatible with the short burst start and no results with the jumper cables, etc... BTW do not trust a simple jiggling test. make sure to take then off clean, put it back on. Most times jiggling cables can be highly deceiving. ;-)
@louieanderson5246
@louieanderson5246 4 жыл бұрын
Hi. You think i duplicate a key. I have the original one do you think if i buy the transborder and put it in my originial key i will be able to program the transborder without pin or obd? By holding the lock button you know these steps or i have to use the p2000
@louieanderson5246
@louieanderson5246 4 жыл бұрын
The transborder which makes the connection with ignition part is separate on my key. So if i take a virgin transborder will i be able to program it without anything. Sorry about confusion
@LMAutoRepairs
@LMAutoRepairs 4 жыл бұрын
Hi That will not work. Thank you for watching!
@luaykhaled
@luaykhaled 3 жыл бұрын
Hi sir.. I have beugot 3008. It's cringing but didn't start the car.. We check all system but we can't find the problem but I didn't check the key.. What should I do???
@LMAutoRepairs
@LMAutoRepairs 3 жыл бұрын
No fault codes? Check live data... Thank you for watching!
@forex9ja180
@forex9ja180 6 жыл бұрын
My 307 ABS got burnt and now my car does not start it doesn't even crank. I need your advise, what should I do, can the ABS prevent the car from starting? please reply asap. Great video though.
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
Emmanuel Ikediobi Hi I believe that the engine ecu is the last on the can network... So if the abs is not passing the comms to to engine ecu the car will not start. Do you have how to diagnose the car? You would see that you can communicate with the engine module...
@forex9ja180
@forex9ja180 6 жыл бұрын
+lmsvvavr No, I don't have. thanks for the clarification, the electrician told me that the car can start even with the ABS disconnected. he also said the car have lost memory that it needs flashing but, I ve not replaced the burnt ABS yet, all he did was to disconnect it. In a nutshell, your advise for me is to buy another ABS?
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
Emmanuel Ikediobi Without looking is complicated... But if my theory is correct, you can jump the can lines on the abs plug.... that will put the engine ecu back on on the network... and the car should then start...
@user-dt3px4nt3j
@user-dt3px4nt3j 4 ай бұрын
We're can I get help nearest to me
@pz7302
@pz7302 9 ай бұрын
Hello, I have same problem with mine Citroen C4. The car doesnt see a key and when I check information about ECU it's locked. What I need to do with my key? I ordered PIN to try program a key again. I add that I have second key without central locking and it wont start either
@LMAutoRepairs
@LMAutoRepairs 9 ай бұрын
You need to check if is the actually key or something from the barrel antena to the BSI... As if you have an electric fault on the car, the programming will fail and you will be left with no keys programmed...
@pz7302
@pz7302 9 ай бұрын
@@LMAutoRepairs on BSI I have no other faults, but on ECU I has short circuit on fan of cooler.
@pz7302
@pz7302 9 ай бұрын
@@LMAutoRepairs If I would want change antena of immobiliser do I need to take off wheel?
@LMAutoRepairs
@LMAutoRepairs 9 ай бұрын
Probably not... but you need to test things before replace...
@jameschinedu4068
@jameschinedu4068 2 жыл бұрын
Please I just change battery on my 207 remote key, after changing the battery, the engine refuse to start, the dashboard displayed electronics anti-theft fault, so please what do I do?
@LMAutoRepairs
@LMAutoRepairs 2 жыл бұрын
You probably lost the transponder chip... Look for it... Thank you for watching!
@mikec7799
@mikec7799 6 жыл бұрын
Hello, maybe you can help me a little. I got a 01' 206 non can bus. After changing the ignition lock i accidently tried to start the engine with the wrong transponder. Quite obvious that it didnt start. But now it wont even start with the correct transponder. Is it the ecu that is now locked? And do non can bus models also have a bsi? Thanks in advance
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
Mike C You have another issue somewhere... The fact that you attempt to start the engine with the wrong key/transponder, will not lock anything... as soon as you put the key with the correct transponder the engine should start... Check codes and live data... Hope that helps. Thank you for watching!
@mikec7799
@mikec7799 6 жыл бұрын
LM Auto Repairs I checked the codes. In the Ecu are some codes, but none of them that could prevent the engine to start. In the BSI is one code. Communication with Ecu. So why is there no communication between them? Maybe you know this problem? Thanks in advance.
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
Mike C Check the communication lines between the BSI and the ECU... if you can communicate with the engine ecu, I would rule out power and grounds... but might worth to check them anyway... 👍
@mikec7799
@mikec7799 6 жыл бұрын
LM Auto Repairs Thanks for the info. I will check them
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
Mike C 👍
@denski200able
@denski200able 5 жыл бұрын
Peugeot Doesn’t Start - What to Do Read more at: autopud.com/peugeot-repair/peugeot-doesnt-start.html
@samuelemmanuel8509
@samuelemmanuel8509 6 жыл бұрын
Bravo! I bought a similar 307 Peugeot car recently, but lately observed that in the car engine will produce a cranking sound on starting the car but won't start....but if I remove the battery terminal for about 30minutes replace the terminals back the car engine will start. please what should I do. My name Sam from Nigeria.
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
samuel emmanuel Have you scanned the car, see if there is anything in there?
@samuelemmanuel8509
@samuelemmanuel8509 6 жыл бұрын
lmsvvavr According to the mechanic who used his system to run the scan, he said that that it showed insufficient pressure. he is insisting on changing the plugs. this is really frustrating.
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
samuel emmanuel Live data and actuators? When you say it does a cracking noise, you mean like if the starter motor is trying to engage, or doesn't do that?
@samuelemmanuel8509
@samuelemmanuel8509 6 жыл бұрын
lmsvvavr yes if the starting motor is trying to engage.... that sound like "...kikikikiki.. ".. ..but will not start
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
samuel emmanuel If the starter motor is kinda trying to engage but is failing, I would say that the starting system is working, and that the starter motor is failing...
@michaelobichigha6271
@michaelobichigha6271 2 жыл бұрын
My 307 will not start. When I turn they key it makes the clicky sound and the windshield wipers start moving slowly on their own, the headlamp keep flashing and central lock will not work. And the horn was very weak sounding. please could you assist me with diagnostics
@LMAutoRepairs
@LMAutoRepairs 2 жыл бұрын
The first thing that pops into my head is battery... Start with the basics... make sure that the battery is in good charging state, check fuses and connections, etc... Scan the can if you can... 👍👍👍
@michaelobichigha6271
@michaelobichigha6271 2 жыл бұрын
@@LMAutoRepairs Changed the battery it works ...thanks a lot
@johnc9228
@johnc9228 2 жыл бұрын
On these is the bcm under the bonnet or in glovebox?
@LMAutoRepairs
@LMAutoRepairs 2 жыл бұрын
BCM is what Peugeot calls BSI... Is the one under the glove box... 👍👍👍
@ERReniassance
@ERReniassance 5 жыл бұрын
My car doesn't restart engine after going on Eco mode. What happens is when you release the break, it tells me put foot on break an return to neutral to start afresh. So it fails to engage the gear or the motor after eco mode. Anyone that faced a similar issue previously?
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
Automatic? Make sure you have a good battery... The eco mode does not prevent the engine from start... obviously, all the inputs need to be ok to allow the crank... Thank you for watching and for your comment!
@keysolution5757
@keysolution5757 3 жыл бұрын
How can you change transponder type on this car ? To make it possible to take aftermarket remotes? TIA
@LMAutoRepairs
@LMAutoRepairs 3 жыл бұрын
The transponder needs to be programmed at the same time as the remote... That's all... Thank you for watching!
@keysolution5757
@keysolution5757 3 жыл бұрын
@@LMAutoRepairs yes did try program a new remote with nxp id46. Key can start car but no remote functions, i been tell need to change something with diagbox to make it possible to accept aftermarket keys. Thanx for your reply and good video
@LMAutoRepairs
@LMAutoRepairs 3 жыл бұрын
Never had any issues... other than sometimes cheap Chinese aftermarket keys that fail to program correctly... Get decent aftermarket keys, and you should be ok...
@tinochoolun4397
@tinochoolun4397 6 жыл бұрын
Hi very nice vdo veri helpfull what is the id of the two chips as my friend has shortcircuit the chips when cleaning as he forget to removed the battery thanks for help tino choolun
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
tino Choolun Hi... Unfortunately I can't help you... I do not own the car and I don't have a clue which chips they are... I have two keys here, but the internals are different... Thank you for watching!
@louilynch6006
@louilynch6006 3 жыл бұрын
Were do u get the software from ppl my wifes citron has a problem with the immobiliser and i need 2 do some dogging
@LMAutoRepairs
@LMAutoRepairs 3 жыл бұрын
Comes with the tool... Thank you for watching!
@freddieunwin6385
@freddieunwin6385 5 жыл бұрын
Hi great vid, I have the issue that my 307 will start if I put the key chip in the coil like you did but as soon as I put it back in the fob engine just turns over??? Please could you give me any advice?
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
Is the key shell an aftermarket? Probably the chip is being placed too far from the coil... Thank you for watching!
@crpth1
@crpth1 3 жыл бұрын
Freddie Unwin - If you have a working spare key, try it. If the problem persist then you'll know it an antenna coil (or downstream issue), like cable, plug, etc. If the problem doesn't show up then you'll know it's a transponder issue. and should be replaced ASAP. Best option in this last case. Make a "clone" while it's still possible to read. It's cheap and fast in any locksmith... ;-)
@LMAutoRepairs
@LMAutoRepairs 3 жыл бұрын
I had it in the past, were aftermarket shells and blades place the chip too far from the coil... and the car fails to read the transponder.... 👍👍👍
@molefisompane6042
@molefisompane6042 Жыл бұрын
I have the same problem with key problem and the car is only cranking
@LMAutoRepairs
@LMAutoRepairs Жыл бұрын
Now you know how to fix it... 😊 👍👍👍
@teslatrev5764
@teslatrev5764 4 жыл бұрын
My 2012 Peugeot 308 diesel only 29000 miles warning lights came on including the power steering and the power steering failed while i was driving ... the fault was the alternator apparently if your battery drops below about 11 volts all hell breaks out the car will try to kill you and your passengers ... new alternator £500 fitter ... sound expensive but the alternator was about £400..
@crpth1
@crpth1 3 жыл бұрын
Tesla Trev - Basic tip that apply to all makes and models... WHEN THERE'S A RED WARNING on the dash. STOP the car, check and correct the cause before proceeding! I'm sorry to say but that's absolutely ridiculous! "How to, Car use 101" if you prefer. If you don't know how to use your vehicle, please refer to the user manual supplied with it... Then it won't "try to kill you and your passengers"! FYI basic color code on the dash: RED : STOP vehicle, correct issue before proceeding (ex. brake system failure, charging system...) Yellow/orange : Be aware and carefully check presented information acting accordingly. (Ex. fog light, etc.) Green or blue : All is fine, just to let you know (ex. high beams - blue, turn signals - green...) In case you haven't noticed already. It has a close relation, for easy understanding, with... traffic lights and it's not a coincidence! Stop on the red light! ;-)
@keithsnyman2923
@keithsnyman2923 6 жыл бұрын
My peogeot 308 starts then after about 4 or 5 second it cuts out, could this be a key or immobilizer problem or sensor problems
@keithsnyman2923
@keithsnyman2923 6 жыл бұрын
then cranks but does not start again
@keithsnyman2923
@keithsnyman2923 6 жыл бұрын
later on it will do the same thing, start cut out then not start again
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
Keith Snyman Is the immobilizer light on? Have you scanned the car? Thank you for watching!
@crpth1
@crpth1 3 жыл бұрын
"starts then after about 4 or 5 second it cuts out, could this be a key or immobilizer problem or sensor problems" Very unlikely to be immo or key. When any of them have issues, normally it will not start altogether. What you describe point to other directions, inclusive fuel supply! ;-)
@Psgamer-vu2hp
@Psgamer-vu2hp 4 жыл бұрын
Washed my key accidentally and i dont have a spare key... what should i do
@LMAutoRepairs
@LMAutoRepairs 4 жыл бұрын
Get a used key and swap the transponder chip... 👍👍👍
@nanau2002
@nanau2002 Жыл бұрын
hi,i have a 2002 peugeot 307 diesel 90 hp and had a crash,after the crash the mecanic started the car and everything worked ok but after he stoped it, won t start anymore and accesories don t work either,ac,central lock ect,red stop is on just like this one,it cranks and there is fueel presure cause the fueel pump works but won t start,could you please give me a ideea where to look cause nobody can find the problem,does this model have a switch for accidents?
@LMAutoRepairs
@LMAutoRepairs Жыл бұрын
The inertia switch... is the only one I can think off... but if it ran already it is probably not that... Scan the car, check live data... 👍👍👍
@nanau2002
@nanau2002 Жыл бұрын
@@LMAutoRepairs thanks,where can i find that switch If You Don t mind,we can t din IT.
@nanau2002
@nanau2002 Жыл бұрын
@@LMAutoRepairs me again,sorry to bother you,scanner gives the following fault codes,5,6,99,160
@LMAutoRepairs
@LMAutoRepairs Жыл бұрын
Which scanner are you using? I am not familiar with those...
@nanau2002
@nanau2002 Жыл бұрын
@@LMAutoRepairs i don t know what scanner did the mecanic use ,he sent me these numbers, it has something to do with seatbelt tensioner actvated,hope i translated well,and with the srs
@367Richard
@367Richard 6 жыл бұрын
Hello my son has a 206 which will not start turns over we got electric locking, windows, lights radio, heater but also has the economy mode up but we have taken the battery off and given it a 24 hour charge economy mode still there but still no start tried to but a ready on it but the car will not talk to the ready any ideas ? Kind Regards Richard
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
Richard john Hi The economy mode should not prevent the car from starting... and will go away once you manage to start the engine... Is the scanner is not communicating, then you might have a network fault... Which scanner have you tried? No communication with the engine ECU only, or no communication to any of the modules? Thank you for watching!
@367Richard
@367Richard 6 жыл бұрын
We had theaa out and he put his one on but said the car is not talking, as it wasn't OBD11 - EOBD VS8702 it come up with a link error so doesn't go any further if it is a Network Fault is there anything we can do or do we need to take it to a Peugeot dealer ? Kind Regards Richard
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
Richard john Try another scanner... something more robust and compatible... and go from there...
@taoh3473
@taoh3473 6 жыл бұрын
LM Auto Repairs what is there is no ecu communication, i have to replace the ecu module ? And i have to reprogram it ?
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
Ta Oh Hi You might just have a network problem, or a voltage feed issue to the module you can't communicate with... Check that before blame the module...
@CatherineShaney
@CatherineShaney 6 жыл бұрын
Hello. I badly need you help. I have Peugeot 206 2005 model and the car won't start because there is an eco mode button on the dash board. Ive seen many videos about it but it's in other language. Please if you can help making video how to resolve this issue. We brought the car many times to a garage but the issue is not getting fixed. The batter has been replaced as well but issue is same.
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
Catherine Shane Boton The eco mode should not prevent the car from start, is does actually the opposite, by saving battery so the car starts. Eco mode disappears once the engine is started. When you say the car does not start, does the engine cranks normally or not even that? Have you scanned the car?
@CatherineShaney
@CatherineShaney 6 жыл бұрын
Hi there. I am inthe car now and trying to start and I can hear the cranking sound. A while ago there is no cranking sound at all
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
Catherine Shane Boton Does the engine turns?
@CatherineShaney
@CatherineShaney 6 жыл бұрын
Yeah the engine just got on and I'm able to drive it to garage. Im not really sure what's wrong because I'm sure after bringing it here it will be the same. The mechanic said yesterday that there is some loose wire and they fixed it but againsame issue. Any suggestions
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
Catherine Shane Boton It can be many things... Anything I would suggest would be pure guessing... Better to have it correctly diagnosed and repaired.
@s3xygaza
@s3xygaza 6 жыл бұрын
hi pal i have a 2005 pug 206 it keeps saying immobilizer engine fault and wont start then after about 5 mins it will start have you got any ideas what it could be thanks gaza
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
s3xygaza When you say after 5 minutes, do you mean after 5 minutes of ignition on, or if you turn it on after 5 minutes it does start?
@s3xygaza
@s3xygaza 6 жыл бұрын
it does it both ways sometimes you have to leave it for 10 20 minutes before it will start it also sometimes cuts out whilst driving it leave it for 10 mins with ignition off and it starts again when it cuts out i get engine imobizer fault on the screen when that message goes of it will start again i have serviced it battery and alternator are ok had both keys checked in a machine and there ok
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
s3xygaza Codes? Have you had the car scanned?
@s3xygaza
@s3xygaza 6 жыл бұрын
Had an auto electrician out today who said there is no codes stored but didn't have the equipment to delete the Imobilizer of the car he said it could be the antenna faulty
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
s3xygaza Even without codes, which is a bit weird.... with the right equipment would be possible to look at the status and live data... and have a better idea of what's going on...
@1LAURIEJB
@1LAURIEJB 6 жыл бұрын
Hi, my 407 has simular prob, turn ignition on,turn to start, one click @ passenger fuse box in pocket, also pocket light dims.Reads on Delphi Diog. 9AO - Starter relay Circuit,short circuit to ground, Permanent. 9B7 Ignition on relay , Not recognized,Permanent , Any Ideas Help!! Thank you Laurie
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
laurie baker Hi Have you checked the relay on the BSM?
@1LAURIEJB
@1LAURIEJB 6 жыл бұрын
lmsvvavr ,thanks for that, I will give it a look ,would that be located on the pocket fuse box?
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
laurie baker Under the hood...
@1LAURIEJB
@1LAURIEJB 6 жыл бұрын
Hi ,if I need to replace BSM under hood, would ithave to be reprogrammed? Also do part numbers have to All match exact on replacement? Thanks for your patience.
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
laurie baker There is no need of reprogramming... however, if you for example, get one from a car without air con, and yours have air con, it will cause issues... And reprogramming might be needed... If you get the exactly same part number the better... but sometimes parts are superseded with a different number...
@folahadenikemi2717
@folahadenikemi2717 Жыл бұрын
Hi. I’m a new subscriber. I took my car to a mechanic to fix the Ac. After fixing the Ac to start the car, the dashboard light came up but the car didn’t start. Also, the central lock keeps beeping. Kindly assist.
@LMAutoRepairs
@LMAutoRepairs Жыл бұрын
If everything was OK except the AC, I would say it is something that has been touched during the AC repair... 👍👍👍
@folahadenikemi2717
@folahadenikemi2717 Жыл бұрын
@@LMAutoRepairs I thought as much. Thanks for your prompt response.
@stewiegriffin6503
@stewiegriffin6503 7 жыл бұрын
7:28 I don't get it. You took transponder which couldn't be read by zedbull, put it on other PCB, and then the zedbull could read it ? That makes no sense. Transponder is a standalone device, not depending on any pcb (at least for ignition part) . Or ?
@LMAutoRepairs
@LMAutoRepairs 7 жыл бұрын
King Parodije Hi No... The original key had a faulty pcb... and zed bull wouldn't read the transponder and that's why the car was not starting... I have moved the chips from the faulty key to the key that came with the "kit"... which zed bull could read but couldn't obviously start the car due to wrong key... So basically all I have done was moving the chips from a faulty pcb into a good one... Hope that clarify things out...
@stewiegriffin6503
@stewiegriffin6503 7 жыл бұрын
I understand all you said, BUT how is it possible that PCB affects the transponder ? I always thought the transponder is non-contact device ?
@LMAutoRepairs
@LMAutoRepairs 7 жыл бұрын
King Parodije That's correct... but in this type of key, it does have a separate coil (antenna) and circuits that connect the chip to the PCB and antenna... Although the lanes on the PCB looked good and I have re-soldered the chips and coil, that made no difference... at first I thought would be a faulty transponder chip... That's why I have switched them over... that fixed the problem, an revealed that the problem was the PCB and not the transponder...
@stewiegriffin6503
@stewiegriffin6503 7 жыл бұрын
Thank you for your kind answer. I learned something new.
@gregjamrozik3716
@gregjamrozik3716 2 жыл бұрын
What do you mean swap chip ... thank you
@LMAutoRepairs
@LMAutoRepairs 2 жыл бұрын
I did this ages ago... at which part of the video are you referring to? 👍👍👍
@gregjamrozik3716
@gregjamrozik3716 2 жыл бұрын
@@LMAutoRepairs well I have the same problem someone has installed a new ignition and key and tapped the original key to the barrel so it can read the signal .. it was running fine then after few weeks it would not start so I bypass all the system and hot wired to ecu and it would crank but not start ... could it be that the original key fab lost its signal to allow the ring to register it and also ecomode is on all times even with a new battery
@LMAutoRepairs
@LMAutoRepairs 2 жыл бұрын
@@gregjamrozik3716 Right... forget about the economy mode... that will go away as soon as the car starts... and does not affect the start of the car, unless the battery is obviously low... As for the issue, you need a transponder that is programmed to the car, a working ignition pick up coil, to read the key, etc... If you don't have the original transponder, or one that is programmed to the car, you will not be able to start it... Not sure what was done base on your description... sorry...
@gregjamrozik3716
@gregjamrozik3716 2 жыл бұрын
@@LMAutoRepairs can I ask for your WhatsApp contact please and are you in the u.k thank you
@Cristip
@Cristip 7 жыл бұрын
Useful. thanks. Becouse i have one problem with my key remote at my Citroen C4 ( faulty antitheft showing on radio screen ) make me to see this video. Before i use Lexia3 to find error but nothing on diagnose. Faulty is coming from remote key too at my car. Now i am sure. Thanks again. I thinking to get second key . You can do it and how much cost me ?
@LMAutoRepairs
@LMAutoRepairs 7 жыл бұрын
Cristian Prisecaru Buy a blank key, get hold of the car security code and with Lexia you can program it. As you have mentined it, I presume you have Lexia...
@Cristip
@Cristip 7 жыл бұрын
Thanks. I don't thinking is possible to program a new key with Lexia.
@LMAutoRepairs
@LMAutoRepairs 7 жыл бұрын
Cristian Prisecaru Hi Yes it is... you just need the new key and the car security code... I have done it many times...
@Cristip
@Cristip 7 жыл бұрын
car security code ... from where to get it ?
@azmiabubakar2509
@azmiabubakar2509 6 жыл бұрын
Hello sir.. I'm from Malaysia.. I really need yr help to troubleshoot and solve my car - Peugeot 307 2.0 16V Petrol - having a problem to start after the mechanic's re-install the engine back to the engine bay.. I strongly suspect the key immo ecu has been locked.! How can I contact you by email? Thank You.
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
Azmi Abu Bakar Hi If is an immobilizer problem, a quick scan and check of live data, will tell you that... start by doing that... Or, if happens after that, check, double check, triple check... that everything is connected correctly and in the right place... Thank you for watching!
@azmiabubakar2509
@azmiabubakar2509 6 жыл бұрын
Hi sir.. Thanks for yr quick reply.. FYI the workshop mechanics which handle my case told me when he insert the key and start the engine., the engine is cranking but won't started.. He then scan with his comp and found that the system said the immo chip has been locked and he asked me to find another peugeot specialist to solve the problem.. I've tried to find solution via a Peugeot Forum and most of them suggest me to change the IMMO BSI-ECU set.. But some of the Peugeot Owner's Club I've chat suggest me to find it in youtube and finally I found your video..
@LMAutoRepairs
@LMAutoRepairs 6 жыл бұрын
Azmi Abu Bakar Hi I totally understand... but that is too vague... You need more than just a scanner and the word of someone that told you that that is an immobilizer problem... I can't really say much more as you can imagine... it might be that the BSI lost the immo... is common on the Peugeot 307... but yes, you need either a specialist, or someone with the right tools that knows what to do..
@rayyrayy9451
@rayyrayy9451 2 жыл бұрын
@@LMAutoRepairs thank you sir
@Inflatablepub
@Inflatablepub 4 жыл бұрын
i have peugeot 107, i have problem in my car its not starting, its first time it is not starting, however engine is working everything seems perfect. the important think is that i changed remort but not machine, i just remort today first time. i have been trying to start but no starting.,can you please help me
@LMAutoRepairs
@LMAutoRepairs 4 жыл бұрын
Hi Sorry, I am bit confused... What have you changed?
@Inflatablepub
@Inflatablepub 4 жыл бұрын
@@LMAutoRepairs i change cover of key Remort because previous one was broken. After long time i used car remote to unlock my car.may be this issue caused by remort or you think some other issue is with my car
@LMAutoRepairs
@LMAutoRepairs 4 жыл бұрын
@@Inflatablepub Have you not lost the transponder when changing the case/shell? Sounds like..
@Inflatablepub
@Inflatablepub 4 жыл бұрын
@@LMAutoRepairs no i did not. Remort is working properly
@LMAutoRepairs
@LMAutoRepairs 4 жыл бұрын
@@Inflatablepub That doesn't mean you have not lost the transponder... Is comon on loads of cars were the remote is independent of the transponder... So, the fact that the remote works does not mean nothing.... Look inside again, make sure you have the transponder... also, the shell, was that like for like?
@auto4x478
@auto4x478 5 жыл бұрын
Hello can you help me with that please I have a 2004 Peugeot 307 I lost you lost the key and I want to disable immo many thanks
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
Hi It all depends on which ecu/engine you have... but why not just programming another key?
@auto4x478
@auto4x478 5 жыл бұрын
@@LMAutoRepairs thanks a lot for your reply The diagnostic tool is not connecting with the OBD2 I tried do with the tango and orange five but I haven't get to programming
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
@@auto4x478 Ok... you will have to read the ecu in order to remove the immo...
@auto4x478
@auto4x478 5 жыл бұрын
@@LMAutoRepairs I can read and write but I don't have a fail to put in and remove it... Do you have a sir?
@danielcosta8431
@danielcosta8431 5 жыл бұрын
Nice accent, from Portugal by any chance, that's cool by the way the problem I have in my 206 is that there's DTC code on the issue that caused it has been fixed but know no one can delete the fault and the engine management light it's always on, tried different devices and no joy so someone suggested that I need to change the ECU because one of many devices that was connected to the car said "unable to communicate with the ECU" and that was it and I was just searching for the consequences of changing the ECU on a Peugeot but after seeing your video I'm not very keen on doing it, now if, only if, you be ever so kind to share your wisdom on the subject I'll thank you in advance and I'll be very happy to subscribe best regards
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
Hi Indeed, Portuguese! 😋 I get everything you saying, but you missed one thing... What is the code in the ecu? Feel free to subscribe...😉 Thank you for watching and for your comment!
@danielcosta8431
@danielcosta8431 5 жыл бұрын
@@LMAutoRepairs Ok obrigado pela resposta, pois ninguém sabe, o problema foi o filtro do diesel nunca foi trocado e a primeira vez que conduzi o carro até casa não tive problemas mas no dia a seguir fiquei no meio da estrada como se não tivesse diesel e o tanque estava cheio foi fácil arranjar o carro foi só trocar o filtro e está feito, por isso cálculo que seja um código qualquer que tenha a ver com baixa pressão de combustível no sistema mas o problema é, que ninguém consegue ter acesso a essa informação via OBD2 eu tenho três scanners e nenhum deles teve acesso ao sistema e levei o carro a uns quantos rapazes que eu conheço aqui na zona mas na melhor das ocasiões apenas diz que não consegue conectar com a ECU, ah e já agora também sou Português como já deves ter reparado pelo o meu nome ou pelo facto ter ter escrito está mensagem em português, não sei talvez. mais uma vez muito obrigado pelo o seu tempo e já subscrevi 👊👍
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
@@danielcosta8431 Não há muito que possa fazer para te ajudar... tens de ver se a porta OBD está boa... consegues connectar com os outros módulos, ou é só o do motor que não dá?
@ThompsonBen-bh4by
@ThompsonBen-bh4by 11 ай бұрын
Wow wow that nice please i will like to no merr please
@hghhhhhggufyhhgffv
@hghhhhhggufyhhgffv 7 жыл бұрын
Please can you send your email I have questions about peugeot 307 key .I have the Same problem .
@LMAutoRepairs
@LMAutoRepairs 7 жыл бұрын
ali Osman Just put them here... that way it might help others with the same problem...
@soptea
@soptea 7 жыл бұрын
The customer will comeback tomorrow complaining about other faults which not exist before you work on this car , his wife left him also because of your work ,etc ,etc
@Cristip
@Cristip 7 жыл бұрын
hahaha , maybe she wanna another car after
@LMAutoRepairs
@LMAutoRepairs 7 жыл бұрын
radu soptea Funny thing is that this car belongs to a lady... lol
@lkim08
@lkim08 7 жыл бұрын
Ha ha , customers are a pain sometimes 😂
@A1topmechanic
@A1topmechanic 3 ай бұрын
So confusion no good explanation
@LMAutoRepairs
@LMAutoRepairs 3 ай бұрын
🤷‍♂️
@horacem6507
@horacem6507 5 жыл бұрын
What language is this because i don't understand a thing.
@LMAutoRepairs
@LMAutoRepairs 5 жыл бұрын
Don't watch it then...
@horacem6507
@horacem6507 5 жыл бұрын
@J225h He ain't english.
@brianthwaites2397
@brianthwaites2397 Жыл бұрын
@@horacem6507 I Know this is bit obvious or should be. Not everyone is English. Just like not everyone is stupid but there are exceptions. If you had read all the posts you would know he is Portuguese in case you don't know it means he is from, wait for it, Portugal and he speaks better English than a lot of Englishmen.
@chimeranzl9147
@chimeranzl9147 Жыл бұрын
Same model, same year, key doesn't have a transponder, but same symptoms. Turns over and runs, take for a drive, get back, turn it off, go to start again and it just won't crank. Battery is good. Any ideas?!!!
@LMAutoRepairs
@LMAutoRepairs Жыл бұрын
Hi No transponder? Either the transponder is built in on the key, or the immobiliser has been deleted... Scan the car, see if you have any codes that might help you... 👍👍👍
@chimeranzl9147
@chimeranzl9147 Жыл бұрын
@@LMAutoRepairs thanks. i suspect the original owner got the transponder bypassed, as there are wiring changes under the hood next to fuses, with a relay installed in there. oddly, it does start then go for a drive, get back turn car off, go to restart and nothing. battery good at 12.7V. weird. it has been fine for ages, but then sat there for months unused and now has been a problem. scanned codes, got P0335 error related to camshaft position sensor, but nothing that shouldn't effect it turning over.
@adamcrane3571
@adamcrane3571 4 жыл бұрын
Good morning
@LMAutoRepairs
@LMAutoRepairs 4 жыл бұрын
Good morning!
Electronic anti-theft fault Peugeot & Citroen
2:35
Adrian Dragan
Рет қаралды 198 М.
Became invisible for one day!  #funny #wednesday #memes
00:25
Watch Me
Рет қаралды 30 МЛН
ОСКАР ИСПОРТИЛ ДЖОНИ ЖИЗНЬ 😢 @lenta_com
01:01
1 or 2?🐄
00:12
Kan Andrey
Рет қаралды 36 МЛН
Start the Car without Immobilizer
6:03
CartechHome
Рет қаралды 29 М.
Fix P1693 Immobilizer Fault Code | Immobilizer Transponder Error | No Start #immobilizer
9:09
Automotive Diagnosis: Cars Repair &Training Guides
Рет қаралды 6 М.
Peugeot 307 Remote Forb Won't Lock or Unlocked The door Solved!
3:34
Dr Cool Auto Fix
Рет қаралды 7 М.
Ex-Stig Attempts to RETAKE the Top Gear Record!
11:51
DRIVETRIBE
Рет қаралды 335 М.
Peugeot 206 не заводится
6:01
ПоЗаконуОма
Рет қаралды 43 М.
БАССЕЙН ДЛЯ АВТО ЗА 25 000 000 ТГ 🌊🚖
11:44
Ерболат Жанабылов
Рет қаралды 57 М.
подчистили салон авто
1:00
RusRoflTime
Рет қаралды 2 МЛН
НАИВНЫЙ ВОДИТЕЛЬ 🤯
0:22
Top YouTubs
Рет қаралды 754 М.
Мгновенная карма 😱
0:10
Story-Bytes
Рет қаралды 2,4 МЛН
Что делать, если отказали тормоза?
0:12
Драг рейсинг это легко! #automobile #dragrace #jzx100 #rdrc
0:35