A video showing how to add tables to your new PinUP Popper System. follow along with this page: www.nailbuster...
Пікірлер: 59
@tobiasmartin6296 Жыл бұрын
Thank you. The step by step Installation on KZfaq is the best way to show for many users.
@andrewseroka2173 Жыл бұрын
This is the third time I have gone through this (new installs) and each time result is perfect. I am very grateful because doing it once does not mean I can do it second or third time without your help, Thank you so much.
@2104doug3 жыл бұрын
Thanks NailBuster for video on how to setup FX3 in Pinup Popper.
@ajd64796 ай бұрын
Thanks NailBuster for all your Work. You do a so amazing job.
@radmacks3 жыл бұрын
Wicked job explaining. Followed along and I was up and running no problems ! Keep up the great videos. Your work is greatly appreciated.
@seanmcgrath19913 жыл бұрын
Another great video sharing all of the knowledge you have learnt over the years. Thank you for making this simpler for us newbies.
@afattori3162 жыл бұрын
Thank you so much for doing this video tutorial. Finished my virtual cabinet and going to buy some fx3 tables. Awesome video!!
@Dsuds233 жыл бұрын
You are amazing my friend. Great video with easy to understand directions. You have no idea how much time you have saved me. Thank you sir.
@CoryB_19803 жыл бұрын
Wow, another video! The timing for these coming out in time for my first build couldn't be better, thanks again for these!
@user-el5vf5zg2u Жыл бұрын
This is a great video. FX3 up and running on my ALP Thanks
@KongsRUs3 жыл бұрын
thank you for all your hard work and tutorials Nailbuster! you are very much appreciated:)
@UcantBeSerious032 жыл бұрын
0:15 ducky!! BigTreeTech?? Just getting started! Thanks for all that you do!
@wetoutLL3 жыл бұрын
Great last few videos, thanks for doing them 👍
@magicmastera2 жыл бұрын
I Really apreciate your videos and all your Work. Thank you so much. Sent allready some money . Thanx
@deniboy2br2 жыл бұрын
Great Tutorial, my fx3 pinball tables are up and running in pinup popper., just doing the artwork now. thumb up and subscribed.
@azamat193 жыл бұрын
Thank you nailbuster for this awesome Software. My fx3 launches perfectly fine with pinup popper. Only the resume or start new game doesn't work right. Sometimes it works right, but often not. I've found that when i set it to 20 seconds, it sometimes clicks at 9 or 12 or what ever second, so sometimes it's too early and the table didn't even load. Also when i want to select a table in popper, the script makes right clicks by itself (at least i think it's the script doing those things.)
@alberto.3962 жыл бұрын
Nice work and easy to follow ! Thanks
@shawndick6462 жыл бұрын
Thank you sir! Done and done. Working GREAT!!!
@retrowrath93743 жыл бұрын
This is an awesome piece of front end software, thankyou
@IRgEEK7 ай бұрын
Thanks NB
@monsterface713 ай бұрын
Great tutorial. This helped a lot. Do you have a similar video for Pinball FX? I followed the steps in the nailbusters guide but I still have a problem with the games being added to the playlist and the wheel icon does not show up. Thanks
@smashedlegends2 жыл бұрын
You should have explained what is a PinUP and why the people should want that.
@Fran_LT6 ай бұрын
Buenas a todos,excelente trabajo Nailbuster,entiendo que para a fx3 es absolutamente necesario tener fx3 de steam y conexion a internet. esto es asi? Saludos
@LinkCherryTree6 ай бұрын
Hello Nailbuster i really enjoy the app but when i upgraded my pinupopper to 64 bit My Dof not working anymore with it. But when i play Visualpinball DOF show up only
@principalcarranza3 жыл бұрын
Great video, thank you so much
@barryconstantine5715 Жыл бұрын
Hello, great video! When I launch a game from the Popup wheel, it takes me to the FX3 UI and not directly to the game. DId I miss something obvious?
@cyborgninja9052 Жыл бұрын
Having the same issue here. I even redid the whole setup with the same result. Not sure whats wrong
@noodletuesday7414 Жыл бұрын
Did you guys figure this out? I’m having the same issue
@therealdjshal2 жыл бұрын
i followed this video exactly and when i start a fx3 game through popper front end it opens up the main fx3 system, is there a way for it to load the game only, and if i missed something i apologize, thank you this video was amazing help
@deepe8982 жыл бұрын
Thank you!!
@benramunno9677 Жыл бұрын
Great learning video mate can you a bingo game video on how to . Thanks
@MrCrrispy Жыл бұрын
Hello, I've followed exactly what's in there, everything works fine, except that if I select keep apron/full dmd screen, once the table is launched it goes "above" the FX3 dmd display which stays hidden behind. If I don't select the option to keep it, the fx3 dmd is displayed in the right place, but on the windows background image. I've already made various tests, no way. Any idea?
@FilthyGator2310 ай бұрын
It all works. What about Indiana Jones though. I don't see it... after all that. Everything else works. How do I add ij?
@hoganzeros35723 жыл бұрын
Great video. Thank you. I wanted to ask you if you were planning a video for fx3 through baller installer but I didn't want to bother you haha!
@debof148 ай бұрын
is this relevant after all the latest updates? Will FX work with DOF?
@mariolestingi60782 жыл бұрын
Nice video , it's the same if I want to add FX2 table ?
@boogasauce20832 жыл бұрын
Thanks for the great how to video: I select the game (Start) - and then I get this error message": Windows cannot find 'PUPDMDControl.exe'. Make sure you have typed the name correctly, and then try again. I had installed the baller installer - all other emulators work great. Any suggestions?
@boogasauce20832 жыл бұрын
Nevermind - found the answer on the wiki!!!
@brentparis288 Жыл бұрын
Stupid question. All of that worked, but how do I set up the controls now without using something like joy2key? I can use joy2key, but it interferes with the other EMUs when I try to use them.
@HB-mj2jz2 ай бұрын
I am following this tutorial, when I import the games with the script it says successfully imported 120 games , but no games appear. When I Search for New games, I see all games though. Am I forgetting something?
@Hecksii Жыл бұрын
Hey Man, I know this video is old and it's a longshot but it's worth a try. So I setup everything and pinball fx3 works perfectly my problem lies in pinball fx2 I did the same thing basically as when I setup fx3 added all the tables setup the emulator and used popper to open the games. Voila it works great but as soon as the table loads it does a fly by for a couple seconds and then pauses the game by itself then without the use of a mouse to click resume game I can't play do you know what could be causing the game to pause itself? It only happens when I open fx2 with popper if I open it regularly with the .exe it works great. Thank you if you read this everything you've done is awesome and thanks for your help.
@code_Wookiee3 жыл бұрын
Is this a new version of popper? I am on 1.4.5 but it looks like the version in the video has new features.
@SweetBlu3 жыл бұрын
What exactly does the ‘keep PUPs display on”’ do??
@silverchin433 жыл бұрын
quick question sir and maybe i overlooked something but is it possible to run pinup player in bigbox and if so can you please let me know where i can find the info? thank you
@jackiecrowder83962 жыл бұрын
For some reason I can't extract the zip files to import the tables. Any suggestions? I'm trying to download the file from the wiki page.
@hoganzeros35723 жыл бұрын
Can someone please tell me what numbers to put in the FX3 cabinet settings screen? My backglass is 1920x1080 and my lcd slim dmd is 1280x390. I've gone wrong somewhere and would like to rule this part out. Thank you.
@krisvangremberghe64132 жыл бұрын
does this work also when playin on 1 screen ? (like fut.pinb)
@paultorres65353 жыл бұрын
Why was pinup player server shut down before 1.4.6 was released? And when will 1.4.6 be released? Also, does anyone know if VPinball will be back up with subscription?
@mongi44353 жыл бұрын
Help! what happen to VPinball?
@retrowolfe99723 жыл бұрын
I already have popper set up with the funky fx3 default names with art etc. If I use your import file will I need to start all over in getting the art files etc?
@seanmcgrath19913 жыл бұрын
Hi David, please could you do a video to add and setup Zaccaria Pinball. I tried to follow the wiki tutorial and this video but I can't get it to appear in Pinup Popper. Although I have learnt alot from your baller installer the wiki tutorial was not easy to follow especially the ahk part and linking the correct paths. I sort of guessed them from this video setup and must have done something wrong. Thanks in advance. I can play Zaccaria via Steam with my cabinet but would love to have it setup properly in popper. Edit: I found a setup video by MajorFrenchy which helped me with the AHK file and some additional bits (kzfaq.info/get/bejne/fbmfgqWStdvVfYU.html). However, I do not have a Zaccaria wheel option for the emulator. Anyone know what I have missed? I worked out what was missing. You need to add the relevant media folders to the Popmedia folder in the pinup system. Then create a playlist where you add all of the games. You can copy the settings from another emulator. Just make sure the playlist has the correct id after copying.
@azamat193 жыл бұрын
Im too struggeling to get zaccaria to work. It doesn't have an ahk file anymore so the major frenchy tutorial doesn't work anymore. I can launch games. But eg if i want to launch combat deluxe, it loads combat (original version). Very weird.
@seanmcgrath19913 жыл бұрын
@@azamat19 I got mine working eventually. Send your email and I’ll send you pics of my settings.
@Snapps240 Жыл бұрын
Anybody else having an issue loading steam.exe?
@DDB_Pincab Жыл бұрын
========= EDIT ========= : solved with that script : SET ALTPARAM=-class if "[ALTMODE]"=="hotseat2" (SET ALTPARAM=-hotseat_2 ) if "[ALTMODE]"=="hotseat3" (SET ALTPARAM=-hotseat_3 ) if "[ALTMODE]"=="hotseat4" (SET ALTPARAM=-hotseat_4 ) START "" "[STARTDIR]Launch\VPXSTARTER.exe" 5 5 20 "Pinball FX3" START "" "[DIREMU]\steam.exe" -applaunch 442120 %ALTPARAM% -table_[GAMENAME] Thanks David for this wonderful tutorial. I'd like to play FX3 tables without the Wizard power (without the icon on the bottom right), I try differents scripts but it didn't work : always these useless powers displayed ! Some help will be appreciated. Cheers from Reunion !
@pearsth Жыл бұрын
Can't find Indiana Jones in your list...do you have an updated file?