Pipe Fitting - Finding Takeoffs for 90 & 45 Degree Fittings / Fitting Prefab Using A Laser

Рет қаралды 69,381

Күн бұрын

Have you thought about making a leap into the pipefitter trade or just got into this field but need some help with how to start pulling measurements? Well here is a video for you!

Пікірлер: 142

@brookswearingen2877 Ай бұрын

Dude, Bravo. I'm a pipe fitter and a pipe welder. I love how you explain everything 👏👏👏👏👏👏👏

@cisnerofam08 Ай бұрын

Thank you for watching!

@jonathanpedraza1663 2 жыл бұрын

Just finished welding school and doing the pipefitting program, you’re an awesome teacher and the way you carry yourself and explain things and the confidence behind your knowledge I automatically knew you were a veteran, then you said 03XX from the Corps and it made sense, we can definitely sense and recognize a fellow Devil Dog lol. Don’t underestimate your grunts, they’re some of the smartest guys I know!

@cisnerofam08 Ай бұрын

Thank you for watching!

@serviceoverself2375 7 ай бұрын

I was searching for the connection with you and i found it at the end - military blood. Libe strong my brother.

@Patrick_1227 Жыл бұрын

Could you make more videos like these? I'm young but I learned a lot just from one video.. you're a good instructor.

@mikej814 3 жыл бұрын

You are one excellent teacher! Would love to gain the knowledge you have, keep videos coming. Thanks

@cisnerofam08 3 жыл бұрын

Thank you for watching!!

@albertohing3200 4 ай бұрын

I am doing this job from 2014 in Florida, I didn’t know nothing about this, but working hard, learning everything from each coworker I got it, nice video

@cisnerofam08 4 ай бұрын

Thank you for watching

@Rypaiz 2 жыл бұрын

Wow, can I just say you are a FANTASTIC instructor. Blown away, learned so much. Thank you kindly sir.

@cisnerofam08 2 жыл бұрын

Thank you for those kinds words!!

@adamwilson4438 3 жыл бұрын

Great video man!!! I’m a pipefitter out of Local 72 in Atlanta so keep up the good work brother.

@cisnerofam08 3 жыл бұрын

Adam thank you for watching!!

@CarlosDiaz-ng2wu Жыл бұрын

Great video, Hand! You're a great instructor and I hope to see more of this content from you!

@FernandoRodriguez-lh9ft Жыл бұрын

Dude, I fucking loved this video. Im an Electrician, and I like to check on pipe fitter videos so I can steal your trig formulas. It is applicable to bend electrical conduit. You explain this in a very understandable manner. Keep it up.

@silentscribes Жыл бұрын

Great video, thanks.

@jenniferpasten8847 2 жыл бұрын

EXCELLENT VIDEO! Thank you very very much for the tutorial!

@apeterson23 2 жыл бұрын

the best fitup video on youtube... Keep showing us how its done!

@cisnerofam08 2 жыл бұрын

Awe man thanks you! 🤙

@ChandanKumar-bn1kh Жыл бұрын

Very nice information

@ouroboros5378 Жыл бұрын

Extraordinaria explocacion. Muchisimas gracias

@dontaeblount3448 2 жыл бұрын

Love this book

@cisnerofam08 2 жыл бұрын

Its definitely a life saver sometimes too!

@marcoscisneros1221 3 жыл бұрын

Great info!!

@serviceoverself2375 7 ай бұрын

Amazingly thorough knowledge of your field and great delivery.

@cisnerofam08 6 ай бұрын

Thank you!

@richiebabcock9284 3 жыл бұрын

Great video..

@mrCHINOchino360 2 жыл бұрын

Great video. Keep them coming

@cisnerofam08 2 жыл бұрын

Thank you for watching

@austinmckenzie3688 3 жыл бұрын

This was such a good video

@farnhamclose11 2 жыл бұрын

Wish I could like it twice. Appriciate this informative video. Thank you.

@cisnerofam08 2 жыл бұрын

Thank you for watching!!

@JJRG3499 3 жыл бұрын

Dude awesome video, thanks for this man👍

@Borderweldingservices 2 жыл бұрын

Hey Edgar, Great Video! Thank you for all the details.

@cisnerofam08 2 жыл бұрын

Thank you for watching!!

@0dbm 7 ай бұрын

Always looked at piping with amazement, very well explained Enjoyed it

@cisnerofam08 6 ай бұрын

I'm glad you enjoyed it!

@wesmccarley9845 2 жыл бұрын

This is great for my students!! Thanks for all the info!!!

@cisnerofam08 2 жыл бұрын

Thank you for watching!!

@j.c.anderson877 2 жыл бұрын

Bro, Thank you so much!!!! Very helpful.

@chrisblakeley5706 2 жыл бұрын

Nice video buddy thank you for your service

@cisnerofam08 2 жыл бұрын

Thank you for watching!!

@rodrigodelatorre3494 2 жыл бұрын

Can we get more videos like this brother loved the video thank you!’

@llewellyndutoit1923 Жыл бұрын

Good job buddy, I could see that you've already been around the block, these method's you just explained, is only learned and self Masterd in the field with trial and error....but once you've Masterd all the technical details, that's when life gets easier, at the end of the day, youve gained so many knowledge and 10 different methods depending on what tool is on hand, that you make your job look so easy to others.... EVERY thing you've just explained, is stuff you cannot learn of paper but only on job or in field work, like you've said there so many more ways to saddle in, but Myself personally use the best method on point were I find myself in the field, and which tools are on hand, weather I'm working on Hights or in Confined spaces,..... Keep up the good work buddy.... Lots of new comers would definitely learned a thing or two

@eliseocantu9040 3 жыл бұрын

Cisneros muchas gracias por tu información, sigue subiendo más videos campeón, saludos de aquí de Houston.

@pipefitters 2 жыл бұрын

Excellent

@cisnerofam08 2 жыл бұрын

Thank you!!

@jensenfritz8079 2 жыл бұрын

We definitely need more videos like this!!!

@cisnerofam08 2 жыл бұрын

Thank you for watching, i will start a mini series soon!!!

@ouroboros5378 Жыл бұрын

Do you have online course?

@romanvera6207 2 жыл бұрын

Good video very helpful you explained it perfectly great job... We need more videos like this... Keep em coming that was awesome 👍👍

@cisnerofam08 2 жыл бұрын

Thank you for watching!!

@threestone2213 2 жыл бұрын

Good video.Thanks!

@cisnerofam08 2 жыл бұрын

Thank you for watching!!!

@corneliucirciumariu 2 жыл бұрын

This was really helpful for me , Thanks a lot !!!

@cisnerofam08 2 жыл бұрын

Thank you for watching!

@gilgloria2580 3 жыл бұрын

Grate video 👍!

@boricuaarecibo9259 Жыл бұрын

First thank you for your military service second that was a great lesson on fitting pipe. I looked at the those chain vise grips and save them to my list

@TheJsote1988 3 жыл бұрын

Awsome Video Sir, keep em coming 💯

@cisnerofam08 3 жыл бұрын

Thank you for watching!

@jkuri89 3 жыл бұрын

Great info man I'm a rig welder and have never gotten into pipe fittings but I know it's eventually gonna catch up to me. Your video was very informative and resourceful. Thank you.

@cisnerofam08 3 жыл бұрын

Thanks for watching!

@serviceoverself2375 7 ай бұрын

Man, I am a mobile welder and that pipe fitting has caught up to me. The pipes that I am working with are huge 24" to 53" You are right, it will catch up with you. I need to learn how to use this blue book.😢

@nigelsandywell8403 3 жыл бұрын

Edgar many thanks, Ace video Dude 👍

@cisnerofam08 3 жыл бұрын

Thank you for watching!

@saltersdavis2160 2 жыл бұрын

amazing !!!

@cisnerofam08 2 жыл бұрын

Thank you for watching!

@weldplanet8806 3 жыл бұрын

Best video ever!!! Subscribing immediately!!!!!💪🏿

@cisnerofam08 3 жыл бұрын

Awesome thank you for watching!

@antoniogalvan821 3 жыл бұрын

Yeahhhhh bbbyy good stuff man!

@cisnerofam08 3 жыл бұрын

Thank you for watching!

@leonwoods4052 2 жыл бұрын

GREAT VIDEO BROTHER !!!!! THANK YOU .

@cisnerofam08 2 жыл бұрын

Thank you for watching!!!

@leonwoods4052 2 жыл бұрын

Always Brother show how to fit ,or make pipe supports off a beam to pipe . Thanks 👍.

@MrPePeLePuo 2 жыл бұрын

Thought I recognized your voice from the innovative training videos, thanks for sharing all this info

@cisnerofam08 2 жыл бұрын

Yeah buddy!!

@adriano9421 Жыл бұрын

Mas Claro que el agua!

@Blobby_Hill Жыл бұрын

Convert the fraction into a decimal 5÷8= .625 4 x .625 = 2.5

@EdoBeats Жыл бұрын

I’m late but wow great video your inspirational

@coreyagregaard2106 3 жыл бұрын

Loved the video i could have used info like this quite a few years ago jam up job bro

@cisnerofam08 3 жыл бұрын

Thanks for watching Pablo!

@sylvestergomez6879 3 жыл бұрын

HOLA EDGAR BUENOS DÍAS, GRACIAS A DIOS TE DESCUBRÍ ESTA MAÑANA Y YA RECIVI MIS PRIMERAS CLASES Y YA TIENES UN NUEVO SUSCRIPTOR GRACIAS Y ESTAREMOS ESPERANDO NUEVAS CLASES BENDICIONES , SALUDOS DE AQUÍ DE HOUSTON TX

@ivanescudero7267 2 жыл бұрын

Exelente video ,ojalá algún día te habientes uno en español !!! Saludos

@donaldwilliams8019 3 жыл бұрын

Nice video

@cisnerofam08 3 жыл бұрын

Thank you for watching!

@Joel-qh8oi 2 жыл бұрын

I'M HALF RULE & DIVISION METHOD ALL DAY‼️ 😅💪🏾👷🏾‍♂️

@cisnerofam08 2 жыл бұрын

Hahah that's awesome, thank you for watching!

@donaldlykins4548 3 жыл бұрын

Holy shit great video!

@cisnerofam08 3 жыл бұрын

Thank you for watching!

@MiguelPerez-mc7ri 3 жыл бұрын

Good information brother

@cisnerofam08 3 жыл бұрын

Thank you Miguel!

@Grady0783 3 жыл бұрын

I'm an experienced pipefitter and I knew all this, but boy I sure enjoyed every minute of your video, awesome job!!!

@rjp9.6 3 жыл бұрын

Jam up video 💪🏻

@cisnerofam08 3 жыл бұрын

Thank you for watching!!

@chakeithamchenry5826 2 жыл бұрын

Thanks man im very rusty

@jerrysoto7586 2 жыл бұрын

Great video that’s exactly hot I would have done it 👍

@cisnerofam08 2 жыл бұрын

Thank you for watching!!

@aymmilanbriones8643 2 жыл бұрын

Has más videos de pipefitter

@roberthowell932 3 жыл бұрын

Good video. There is a site i cannot find again you can input all data even for large pipe and print it out on your computer.

@cisnerofam08 3 жыл бұрын

Thanks for watching!!

@jtoker9758 3 жыл бұрын

I got the blue book, but I can't find that in mine at 2:09. I really like how in your book, it shows the fitting and then the various measurements for it. I ain't got any picture of fittings like that in mine. It definitely isn't on page 95.

@cisnerofam08 3 жыл бұрын

The book that I'm using/ referencing is THE PIPEFITTERS BLUE BOOK by W.V. GRAVES

@jtoker9758 3 жыл бұрын

@@cisnerofam08 See I didn't know that there were two different books. One I got is also literraly a blue book, but is called pipe fabricators blue book. You ever use that book? Which one is the better of the two if you had to have one? Thanks

@kyle19882 2 жыл бұрын

Good video, however I noticed one thing. I would recommend NOT hammering the punch for finding the center, on an existing line. If it’s existing I always use a marker or soap stone.

@jerryvillarreal598 Жыл бұрын

Im tryin to breakout as a fitter and came along this issue. Need to find out top part of the in degrees if the bottom cut is 22 degrees. Can u plz show me how to do this

@anivalrodas3041 Жыл бұрын

Snr donde consigo el libro de trazado de usted muy agradecido

@jerrylebosada102 2 жыл бұрын

great job guys! where we can buy blue book!

@cisnerofam08 2 жыл бұрын

Amazon!! I have bought two of them so far and both were pretty good quality

@edgarmacias6828 Жыл бұрын

Diameter + radio = take off

@ujarcreations3477 2 жыл бұрын

How çan I collect the Blue Book. And u r narration is excellent. Thanks

@cisnerofam08 2 жыл бұрын

You can buy it on Amazon

@briang1561 2 жыл бұрын

What is the difference between the pipe fitter and pipe fabrication blue book?

@cisnerofam08 2 жыл бұрын

There are several books out there in this field of work, so I can't really speak specifically on those. The one in here is The Pipe Fitters Blue Book by W.V. Graves.

@hungrypear6425 2 жыл бұрын

Bennett sent me here.

@cisnerofam08 2 жыл бұрын

Bennett from where? Thank you for watching!!!

@hungrypear6425 2 жыл бұрын

@Edgar Cisneros he's the math wizard, the myth and the legend.

@kingkolt886 2 жыл бұрын

Where did you buy the pipe fitters blue book at ? I’m hesitant because I read that there are counterfeit copies sold of them blue book online.

@cisnerofam08 2 жыл бұрын

Amazon!!! I have bought two of them so far from Amazon.

@kingkolt886 2 жыл бұрын

@@cisnerofam08 from what seller on Amazon? I was thinking of getting it from Austin Ross but he sell it from $37 plus shipping. $49 total.

@cisnerofam08 2 жыл бұрын

@@kingkolt886 the seller is Anadorn LLC its $31 and a $4 delivery fee. They are out of Virginia. If you look they have the best reviews from people who bought from them. The book in the video was purchased from them.

@kingkolt886 2 жыл бұрын

@@cisnerofam08 so I’m trying to practice the branch and bell hole test. Is there any other books you recommend for these ? Or just the blue book?

@mishrasubrata2148 2 жыл бұрын

How to gate this book

@felipecarlos7360 Жыл бұрын

👏🏼👏🏼👏🏼👏🏼🇧🇷❤🇺🇸👊

@fabianbustamante6397 2 жыл бұрын

Buena colega , si hablas en castellano sería genial , usted es latino , hablé en castellano colega , muy buena explicación

@jtoker9758 3 жыл бұрын

I just did the 5/8 method for a 3 inch pipe and it worked out. What gives?

@cisnerofam08 3 жыл бұрын

The ⁵/⁸ method is used to find the take off of a butt weld 45° fitting. This method starts to work from 4" and bigger. The take off for a 3" 45° BW elbow is 2". If you use this method 5/8 X 3 = 1 7/8" which is incorrect.

@aminmelaka9804 3 жыл бұрын

hey bro how to get the chain strap or you diy?

@cisnerofam08 3 жыл бұрын

So the chain strap or aka chain grips and chain extension was bought off of Amazon.

@craigbosko2229 3 жыл бұрын

THE NAME OF THE COMPANY THAT MAKES THAT "CHAIN GRIP"IS "VICE GRIP"AND THEY HAVE BEEN AROUND FOR A LOOOOOOOG TIME, THERE'S OTHER COMPANIES LIKE THEM BUT VICE GRIP IS THE MOTHER COMPANY.