#Pit

Рет қаралды 12,980

2 жыл бұрын

For a close-up look, at what to expect when you first prime your new pellet smoker, or any time you run your pellet smoker empty of pellets

Пікірлер: 23

@gerleanyates4294 2 жыл бұрын

I Love your work

@madmike2624 11 ай бұрын

I love mine also. The music chosen for this video is epic!! LOL

@silverbackproduction8476 11 ай бұрын

Thanks

@northernbassalliance1442 Ай бұрын

Buddy gave me his that he disnt use. This thing takes FOREVER to get to temp. Its been sitting at 195 for 15 minutes. I setit for 250. Im tempted to toss it and just go bqck to using my wsm 22 for all cooks. Instead of just the long cooks.

@brianisom2661 9 ай бұрын

Just received mine so this will be my first use. I turned it on to smoke and it's not heating up. Any suggestions?

@rossamspaugh8637 2 ай бұрын

This is my first time using a pit boss I turned it on to see if it works and I see the igniter rod got a red glow to it just wanted to see if it worked will have to do the burn off one of these days and what temp do you turn it to do that

@silverbackproduction8476 2 ай бұрын

If you just turned it on for the first time, then you won’t get any smoke or anything because the hopper & auger is empty, to get smoke to start, prime the system. You have to push the prime button to make the auger turn a little bit faster to get pellets down the auger to the burn pot, but if your patient is short, take a half a cup of pellets directly into the burn pot the unit will start to smoke quicker. The pellets in the burn pot will start burning. The auger will continue to feed the burn pot to keep the fire going, just a pro tip…

@rossamspaugh8637 2 ай бұрын

Thanks for letting me know plan on trying it out tomorrow

@theobserver9565 2 жыл бұрын

Had a hopper fire in mine.

@remounkattoula769 Жыл бұрын

had the exact same thing happen today

@silverbackproduction8476 Жыл бұрын

make sure the unit is level so fire don't burn back into the auger, and / or when done, turn tempt knob back to 150 for five to ten minutes, then shut down

@tammyjobrown2412 Жыл бұрын

Love my table top. No trouble with mine.

@silverbackproduction8476 11 ай бұрын

It's great for cooking steaks

@TylerKelly-dc3iq Жыл бұрын

Mine won’t shut off fully after I turn it to off position I can still hear the fan going

@scottgilbraith2534 Жыл бұрын

The fan keeps running to burn up the pellets in the cup.

@silverbackproduction8476 11 ай бұрын

that's normal, the fan is going to run for about 15mins to burn all the pellets out of the burn pot, so the pot clear for the next cook...

@scottgilbraith2534 Жыл бұрын

Keep your fingers out of the burn pot. The igniter rod gets extremely hot.

@silverbackproduction8476 11 ай бұрын

Thanks

@fredbennett2091 Жыл бұрын

Is it necessary for priming

@silverbackproduction8476 11 ай бұрын

Yes, it gets the pellets burning faster, so you don't get fault codes or you can just drop a fist full of pellets in the burn pot to get started faster...