Plastic Shed Project Part 3: Building the Keter Shed

Рет қаралды 37,397

3 жыл бұрын

Thanks for joining me on the channel, I hope you enjoy & find it useful.
Amazon link for the Keter Shed:
amzn.to/3OPN9h9
Amazon link for ProBase:
amzn.to/3OSQVGn
Well this took longer than I thought, but then doing this on your own (apart from the roof) was never going to make it quicker. Glad the majority of work is now complete, but I still have some loose ends to tidy up; I’ll cover these, my thoughts and how much this all cost (in time & money) in an upcoming video.
In the UK I purchased the shed from Amazon.
I look forward to your comments & please subscribe.
DIY Dick
Follow me on Instagram @ / diydicktv
#diy #diyneverstops

Пікірлер: 49

@HBOMB-nl9pw 3 сағат бұрын

Definitely going to end up screaming and shouting in the garden with this.

@thegrumpygamer3081 3 жыл бұрын

I put a 6 x 4 Keter manor shed up a few weeks ago and with out a shadow of a doubt the roof was the hardest part to do. It was a nightmare to get slotted in, but with the spatula and a delicate blend of psychology and extreme violence I finally managed it.

@diydick434 2 жыл бұрын

Oh those roofs... totally get where you are coming from & what a relief when it finally fits into position!

@thegrumpygamer3081 2 жыл бұрын

@@diydick434 Absolutely, the harder the problem the greater the satisfaction when you finally nail it. I must be a glutton for punishment though as I now have to put up a Keter Darwin as the Mrs could not get hold of a manor like the aunt did. The roof looks even more of a mare, looks like I might need some Valium on that one :)

@thegrumpygamer3081 8 ай бұрын

@MrGogania Keep going you will get there in the end. Then sink a few beers, and let the pain drift away Lol. I can say after all this time it has held up well and to my surprise has not leaked and not one tool in there has gone rusty.

@user-oq2pl6xq7c Ай бұрын

I am in the middle of building a 6x8 keeter shed . Interesting experience. When it's done with have a garden shed that doesn't need maintenance. Hurray😮

@randystevens2710 Жыл бұрын

Thank You for your Help, We had a much better understanding of what to do. We just finished our 6x4, It seems nice enough for our needs.

@user-rq5hi9rv9p Жыл бұрын

We put our shed up at the weekend. I was very careful with ensuring every side panel was sitting exactly into the frame. Was hoping this would prevent issues with fitting the roof. With an extra pair of hands the roof was clipped into place in less than 10 mins. Did one gable end first. Definitely recommend 3 people for the roof. Thank you Dick for a cracker of a video this did give me confidence as a female to buy a keter Shed.

@dawnelfiiya 2 жыл бұрын

Just built a similar one from Keter- got to the roof and it turned into a nightmare 😅 anyway took a break and watched this. Was super helpful seeing you bashing it 🤣 made me think hmm maybe I don't need to be so gentle with it... gave me an idea! So my top tip to pass on for anyone stuck with the roof!... ⬇️ The rail attached to the roof that slots onto the sides can be bent back on itself if it's too tight. 😱 Barely needed to use the spatula this way and drilled in the screws as I went to hold it down. Then there was just a corner left that needed wiggling into place :) Don't wrestle with the roof any more folks!! Obviously be careful, but it was super bendy and you can see when it's at more of a 90 degree angle it will fit :)

@rjames5128 8 ай бұрын

Sorry i am not that bright. Can you explain more “can be bent back on itself”? Are you doing this from this inside or outside?

@tallslimguy 2 жыл бұрын

My advice from my own experience it to paint the hinges and door bolt with a couple of coats of quality paint because they will ( and do rust)

@Thechief1977 Жыл бұрын

Excellent video - having the same headache with our roof!

@MrFadeCatton 2 жыл бұрын

Great video. Built with my dad this afternoon through to late evening. Doors not aligned great but only negative. Great shed none the less. Thanks for your video and useful tips!

@diydick434 2 жыл бұрын

Thank you, and glad you found it useful

@patbradley5015 3 жыл бұрын

very well done , patient and handyman thank you

@diydick434 3 жыл бұрын

Thanks Pat, much appreciated

@qpdrivingschool7122 Жыл бұрын

Well done,I definitely agree it's a two man job.

@PhillWyattProjects 3 жыл бұрын

I recently put together a Keter Darwin it was good fun. I also made a video about it coincidentally 😄. Good work 👍 just subscribed.

@chrisdavis2577 Жыл бұрын

Thanks, just built my shed without the instructions from watching this video twice

@jokermtb 3 жыл бұрын

I'm about to do my own!

@diydick434 3 жыл бұрын

Good luck! Hope it goes well.

@chrislloyd3626 2 жыл бұрын

Cheers for the vids

@diydick434 2 жыл бұрын

Thank you, hope you've found them useful

@trentgashi5943 3 жыл бұрын

Great video, I've got the weekend set aside to get mine done. Hopefully it goes as smoothly as it did for you.

@diydick434 3 жыл бұрын

Thank you. Hope yours goes well too!

@djdazza2796 2 жыл бұрын

I have exactly the same shed as this, But I noticed on your one you haven't fitted a rail in the roof (part b1a), Im having a nightmare fitting the roof with this part so I take it you don't need it?

@kevinlindsay-smith9484 Ай бұрын

Hi DIY Dick Would I get away without a base as I plan to build it at the back of a flattish tarmac drive? Thanks 🙏🏽

@TheImprovisations Жыл бұрын

What is the measurement between the the floor inside to the top of one of the lower walls?

@angelalocke8125 Жыл бұрын

I have ordered a Keter shed 6x5 can I ask are the screw points marked on the structure? or does the instructions tell where to secure with the screws? Super helpful video. But not looking forward to the roof.

@JoeHalton 4 ай бұрын

Hi Dick, just wondering how the shed is holding up a couple of years on and do you have issues with condensation? Thanks

@davemiddleton3382 2 жыл бұрын

May I ask what model/type of Keter shed this is please?

@victorrussell6284 2 жыл бұрын

Are the screws stainless?

@freddie1036 3 жыл бұрын

Hi excellent and entertaining video, I have a guestion can you tell me if/how you fixed the shed to the shed base?? Thank you

@diydick434 2 жыл бұрын

Hello, glad you enjoyed it. Sure, and I didn't actually fix the shed floor to the base (i.e. Probase & Gravel) - this might sound counter-intuitive & strange but as soon as you start filling it I promise it's not going anywhere!

@user-oq2pl6xq7c Ай бұрын

My 6x 8 shee has the option of screwing it in to the concrete base, but I'm not going to as shifting the partially completed shed was so heavy for 2 strong blokes so it was level , means even in the most powerful storms, with stuff stored inside it's not going anywhere and is protected on 2 sides by fencing.

@edwardsfamilychannel5807 2 жыл бұрын

Had to become sub 555, how's the shed holding up ?

@petercarle4026 2 жыл бұрын

Good Vid Dick. How did you anchor the shed in case of high winds? Thanks in anticipation.

@diydick434 2 жыл бұрын

Great, thank you. I didn't actually anchor it but let the weight of everything I put in it keep it in situ. It survived very high winds earlier in the year without any problems (I did a quick video on that too). If you need to fix it I recommend looking at a solid base at least in part and then using some self tapping masonry screws.

@krellft 2 жыл бұрын

Great video Dick ... are these plastic sheds really waterproof and good for electric/metal DIY tools ... just worried they might get rusted? ... I need to move those tools out of the cleam workshop.

@diydick434 2 жыл бұрын

Thank you. I've had mine for over a year now & all is dry inside plus no condensation either - it's a little sheltered though & mainly used as a wood store, but I'd definitely put tools in one given my experience so far

@krellft 2 жыл бұрын

@@diydick434 Great, good to hear ... 'dry' is your friend for expensive tools ... side note: a family friend said metal sheds actually sweat, so that's a definate no in this respect 😉