Sequencer SQC ,SQL ,SQO & SQI Instructions for Allen Bradley SLC 500 & MicroLogix 1500 PLCs

Рет қаралды 17,268

Күн бұрын

Sequencer SQC SQL SQO SQI Instructions for Allen Bradley SLC 500 RSLogix 500. This video discusses the basic sequencer instructions such as sequencer input, output, load, and SQC. A traffic stoplight project is developed to show how these instructions can be integrated with a typical control program. The program is then executed using RSLogix 500 simulator software and also on the MicroLogix 1500 PLC,
Visit plcgoods.com/ for information on our products
**** Links to purchase my PLC programming Video ***
based courses, eBooks & PLC/Micro projects, etc
1- affiliate link to purchase the Factory IO
factoryio.com/...
plcgoods.com/s...
PLC video courses
(2) S7-1200 with TIA PORTAL & KTP 400 HMI (44 Lessons /12 hours)
(3) Programming Allen Bradly PLCs with RSLogix 500/5000 (32 Lessons/9:30 hours)
(4) Delta programming PLCs (25 Lessons/8 hours)
(5) Camtasia V 2019 video courses (10 lessons ~ 3 hours)
****************************** eBooks
(6) Programming Siemens S7-300PLC with Simatic Manager
(7) Programming Siemens S7-200 PLC with Step7-Micro/Win
(8) Programming Siemnes LOGO PLC with LOGO! Soft Comfort
(9) Programming Allen Bradley PLCs with Rslogix 500
(10) Programming Allen Bradley PLC with Rslogix 500 pro simulator
******************************* PLC based project eBooks
(11) PROGRAMMING a 4 FLOOR ELEVATOR WITH S7-300 & LOGO
(12) PROGRAMMING an 8 FLOOR ELEVATOR system with S7-300
(13) IMPLEMENTING a TRAFFIC LIGHT system with S7-300 & WinCC
(14) Implementing a PLC-based temperature controller with PID algorithm
(15) Programming a PLC based car Parking System with SIMATIC S7-300 PLC
(16) Implementing a PLC-based temperature controller using a LOGO PLC
********************* Microcontroller / Arduino based project eBooks
(17) The Arduino based temperature controller with PID algorithm
(18) 4-floor elevator control system using Arduino Microcontroller
(19) Implementing a Traffic Light Controller System using Arduino
(20) SIMPLE ARDUINO BASED AUTOMATED Parking system

Пікірлер: 35

@michelyani2403 9 ай бұрын

Muchísimas gracias!!! finalmente pude entender la instruccion SQO !!!

@plcgoods 9 ай бұрын

How to Find More of my related Videos on youtube : 1-Open Your Web Browser 2-Go to youtube.com 3-In the Search Box, Type: "plcgoods allen bradley" 4-Hit Enter/Return Explore and enjoy More related Videos on My Channel!

@arar1030 Жыл бұрын

Excellent explanation

@plcgoods Жыл бұрын

Thanks for your comment, glad to see you found the content useful!

@PURGE-3000 2 жыл бұрын

wow im getting certified on the 5000 software. its even more confusing but thanks to you the explaination was more informative.

@plcgoods 2 жыл бұрын

Glad it was helpful!

@valmontdain 3 жыл бұрын

Once again as always, thanks a lot for these amazing and insightful tutorials! Please sir, could you help me understand the need for the two timers? Also, how were you able to make the outputs to blink for 2 seconds when when the timers each was for just a second independently. keep up the good works sir, you are still the best. Greetings from Nigeria!

@plcgoodsmentor9223 3 жыл бұрын

Hello. thanks for your comment. 1. see the last line of the plc program (time 14:10) . I need a contact to change from 0 to 1 every 2 seconds. I used two timers to create this contact (T4:2/DN). Also, it's possible to create this contact with a timer that repeats its timing every 2 seconds. 2. Note that, The SQO instruction works with any positive pulse (edge changing from 0 to 1). As you can see, when the CPU is executing the program, the T4:2/DN contact is activated for 1 second and deactivated for 1 second. But its value changes from 0 to 1 every 2 seconds

@valmontdain 3 жыл бұрын

@@plcgoodsmentor9223 Thanks alot for your prompt response as always. Pls, it's still a bit blurred to me about how the 2 seconds clock was manipulated within 1 second. Am just a learner and I believe there is a technique you used that can be beneficial if I can understand how it was achieved. Thanks alot sir

@plcgoods 3 жыл бұрын

Thank you! Glad that you liked the content, to support the channel to grow faster and to become more useful, please subscribe, share and like the channel with your friends of similar interest

@jefferylong3613 2 жыл бұрын

Where's the instruction on SQC, SQL, and SQI as described in the title?

@plcgoods 2 жыл бұрын

SQO, SQC & SQL are used to write the PLC control program which controls the Stoplight project. In the video, all explanation is given and the setting up those instructions are clearly explained. SQL is not used in the project but its application is very close to the other ones.

@jefferylong3613 2 жыл бұрын

@@plcgoods I agree that SQC and SQL are mentioned but not to the point of true explanation providing understanding. I think you should have not included them in your title because it's misleading. I was expecting a better explanation or example of how these two are used. :(

@MrFernandoBedoya 2 жыл бұрын

Amazing tutorial. Thanks!

@plcgoods 2 жыл бұрын

Great, thanks for your comment!

@JGrosselfinger Жыл бұрын

Great videos. You don't know how you've help me thru the years. Could you please help me figuring out is there a way to make a sequence for a single Out bin (lets say <a href="#" class="seekto" data-time="120">02:0</a>/1) and change the value in a sequence from B<a href="#" class="seekto" data-time="180">3:0</a>/0 then, B<a href="#" class="seekto" data-time="180">3:0</a>/1 then, B<a href="#" class="seekto" data-time="180">3:0</a>/2, etc. Thanks.

@plcgoods Жыл бұрын

Hi there, Right now I don’t have access to my Allen Bradly PLC and its software to help you. However, thanks so much because of your comments.❤

@santiagomoore374 3 жыл бұрын

Sir, as you told, To find in AB Playlist about 'MSG' instructions, but it's not there for RSlogix 500. Please upload a lecture on this topic. MSG instructions is not available in whole KZfaq. So please help on this, I am badly confused and searching about last 3 months.

@plcgoods 3 жыл бұрын

Yes, you are right, I misunderstood your question, my apology!

@santiagomoore374 3 жыл бұрын

@@plcgoods Sir, It's ok. No need for apologi. But, it's request to upload a video on MSG instruction. And thanks for the responses

@plcgoods 3 жыл бұрын

I misunderstood you, Sorry!

@plcgoods 3 жыл бұрын

@@santiagomoore374, It takes lots of time and planning to create videos with this quality, right now, I am working on my Delta-related video and do have time to spend on anything else, BUT thanks for your concern and comments.

@KameronAbear 3 жыл бұрын

I'm currenting making a project with the SQO for school, and I'm confused onto how you'd reset the SQO to reset the process.

@plcgoodsmentor9223 3 жыл бұрын

Hi there, try to use and change the entered control address(R6:0)

@plcgoods 3 жыл бұрын

could you get your issue resolved ?

@jamesamarh8157 2 жыл бұрын

Thanks for the tutorials. Pls I want to purchase the RSlogix 500/5000. Any contact.

@plcgoods 2 жыл бұрын

please to purchase, follow this link to www.plcgoods.com site: plcgoods.com/product/awesome-allen-bradley-programming-video-lessons-rslogix500-5000-training-course/

@steve-ip1cd 3 жыл бұрын

What would be a practical application for these instructions?

@plcgoods 3 жыл бұрын

usually the instructions simplify your ladder program by allowing you to use a single instruction or pair of instructions to perform common complex operations. I try to explain HOW to use each, BUT to know WHERE to use each, depends on the programmer