Here is a slick way to see if your pool handrails and ladders are grounded. We had some major work done and a verification was needed.
Пікірлер: 18
@JoseFReyes-xs1hz5 жыл бұрын
I agree with all the comments grounding and bonding are two separate situations
@HxlA9 жыл бұрын
Thank you ...
@mrrodneyalong4 жыл бұрын
Is there any plastic pipe between the pump and the water fill? Shouldn't the pump be bonded directly ( maybe it is) into this circuit? Should this test have been performed at the pump as the beginning of your continuity test?
@user-pq2pq3dy6h2 жыл бұрын
First ladder you said it was grounded...I thought it was for bounding?
@Eec20236 жыл бұрын
Sir- That is NOT grounding. It is an potential bonding grid. Grounding and bonding are not the same thing. You absolutely should be testing neutral to earth voltage across the entire bonding grid as well as the water and all pool equipment. You could’ve disconnected all the wires that were hooked up under the concrete and you still would’ve had continuity because all the metal that you touched could have read continuity from contact with the water it’s self. That pool holds lots of human beings and should be tested by a licensed master electrician. No offense but you seem like the maintenance man that works for the property. I am hoping that the master electricians who bonded that equipment tested it properly
@Gadingy Жыл бұрын
Equipotential bonding.
@aussiebikeorhike724710 ай бұрын
What do you do if there is no hand rails on the pool
@doncasto38927 жыл бұрын
Over the lip fill is against code in Florida.
@joeferry27238 жыл бұрын
water is bonding...you have to show values. ..you proved nuthin
@CarlosTorres-je3bt Жыл бұрын
Can you tell where can I buy that continuty tester?
@swagmandan2 ай бұрын
Shocking,,
@mikehawke45474 жыл бұрын
i cringe every time i hear him say "ground". this is a complete waste of time. bonding and grounding are two very separate and very distinct tasks. this guy is "checking" the actual electricians. hilarious. they should check if he emptied the trash properly. read the heading "verification was needed" .
@electropentatonic3 жыл бұрын
This is a terribly unsafe demonstration and a rudimentary understanding of the purpose behind NEC requirements for pool bonding and grounding. If used, this demonstration provides no proof of ground or bonding and will lead the home/business owner to believe their pool meets lawful requirements while no ground could actually be present. This video should be removed.
@hippo-potamus Жыл бұрын
So instead of using continuity he should of tested the voltage across all the metal surfaces to make sure they all read the same?
@j.a.animalia736 жыл бұрын
You tested continuity, not resistance and certainly not the equipotential (bonding) of the pool, water, fixtures, and surrounding surfaces. Grounding and bonding are two separate issues and not synonymous. Look up testing "neutral to earth voltage (NEV) testing" and educate yourself. You wasted your time.
@Gadingy Жыл бұрын
You have no idea what you are talking about, much less of what you are doing. Please take this video down.