Porsche 914 Upgrade Project - 29 - The Charging System Part 2
Рет қаралды 103
Күн бұрынThis video wraps up getting full functionality of the charging system. No more dead 12V battery, fan is spinning, charging limits are set correctly and charge current tapering is working properly.
----
Patreon: / mikestropicaltech
KZfaq Membership levels are active.
You'll see a little promo clip from my friend who runs the ImInHuaHin.com web site. Check it out for all things related to our fine city.
Drone: DJI Mini 2
Editor: DaVinci Resolve 18
@jensschroder8214 5 ай бұрын
Don't forget the freewheeling diode for the relay. When the relay is switched off, a voltage spike occurs. Use three diodes. One from the ignition lock in the direction of the arrow to the relay, one from the charging module in the direction of the arrow to the relay, the third diode from minus in the direction of the arrow to the relay. So all diode rings point to the plus of the relay. The third diode has the anode at minus of the relay. This will savely reduce the voltage spike.
@MikesTropicalTech 5 ай бұрын
Thanks for that! I remember I had one across the contactor coil in the first version of the car in 2009.
@janiyaalessandra6835 3 ай бұрын
Promo*SM 😃
Home Assistant Tips By Larry
Рет қаралды 4 М.
Mike's Tropical Tech
Рет қаралды 133
The One Place
Рет қаралды 7 МЛН
whyKRONE │ Edit’S
Рет қаралды 699 М.
# мотоТаня
Рет қаралды 6 МЛН
Ikbalmotovlog 0786
Рет қаралды 3,6 МЛН
МАРТИН БОГАТЫРЕВИЧ garage
Рет қаралды 595 М.