I build a portable bike stand that can be taken when we travel
Пікірлер: 73
@bobfisheruk4 жыл бұрын
Very well made and looks professional. Thankfully my NC750X has a centre Stand
@ryanmcdonald62924 жыл бұрын
Might have to knock one up for my bike. Great vid. Thanks!
@returnrider49524 жыл бұрын
Well... that's just excellent. Painted red it looks like it came direct from MX-Store. Well done again. :-)
@OzADVRider4 жыл бұрын
I have a center stand but might make one anyway because it looks cool. Great job, thanks for sharing
@thomaskerr98914 жыл бұрын
Homemade snap jack! Great work!
@charlesspadowski58464 жыл бұрын
Brilliant, thanks for sharing.
@ccooper87854 жыл бұрын
Very good. It has always been a bugbear of mine that so many bikes don't come with a centre stand as standard (and the same with cars that don't have a spare wheel + jack). Never mind, it probably does the manufacturers balance sheet a favour....
@norsefalconer4 жыл бұрын
Brilliant Mate!
@hussienabukhalil20122 жыл бұрын
You are a genius. Thank you so much for the video.
@deandownunder80914 жыл бұрын
Well done mate 👍
@peted72954 жыл бұрын
Good work, wish I'd saved the money on a centre stand and made one of these myself.
@user-ky3my1gi2z4 жыл бұрын
You as usual inspire people to rely on themselves, I really want to try welding machine
@1bike2up4 жыл бұрын
Can't beat making your own 😎
@tiroxpowersports9413 Жыл бұрын
Nice !!! Like a Snapjack. Good Onya.
@motorcyclewild58733 жыл бұрын
That is an awesome idea.
@rafaelj.mottal.94082 жыл бұрын
Excellent, thanks!
@rogerwilliams29024 жыл бұрын
Excellent !.
@CaptainCrankyMotovlogger4 жыл бұрын
Impressive! Both the tool and the workmanship :) Please note I avoided the obvious, but tempting, tool joke...
@AfricaTwin-Stuff4 жыл бұрын
CaptainCranky - ha! I’m first to agree I’m the biggest and dumbest tool in the shed!
@Tamaresque4 жыл бұрын
I never thought of using a hydraulic jack to raise the rear just a little. I wish NCX's came with a centre stand as a standard fix, but in any case I've lowered mine, so a standard one would not fit. Thanks for this. That will do before I try putting the Scottoiler on the NCX. And I have the other bike on the market, so that will do for that one, too. :-)
@79sketches4 жыл бұрын
I was thinking the same. Never heard of this technique
@Herzankerkreuz674 жыл бұрын
A center stand is a must on any adventure / touring bike. Not just lubricating the chain but many more maintenance jobs as well as loading luggage etc. Just saying.......
@AfricaTwin-Stuff4 жыл бұрын
andree hammerschmidt - I decided against a centre stand for Wendy’s CB500X as it has been lowered (she is a shorty). I didn’t want to compromise the ground clearance further with a centre stand. But I DO have one on my NC.
@Herzankerkreuz674 жыл бұрын
@@AfricaTwin-Stuff Fair enough however I really don't want to miss it on my bike anymore, since I categorize it as the most important accessory.
@GSilva024 жыл бұрын
Da hora! Tome like....
@Budivedder4 жыл бұрын
Nice work
@louisgerber9993 жыл бұрын
Safety first
@jacofi4 жыл бұрын
A piece of tube in the box section where the bolt goes through would make it stronger & last longer, wish I had something like this for Trumps when I had him.
@AfricaTwin-Stuff4 жыл бұрын
Fagan Fulton - hmm. Possibly. But that would mean it would not fold up. But it’s way strong enough. It’s only holding up a few kg of weight on this “3rd point of contact”. I can shake the bike with both hands and it remains rock solid.
@jacofi4 жыл бұрын
@@AfricaTwin-Stuff not as a replacement for the box but like a crush tube to stop binding and the hole elongating?
@AfricaTwin-Stuff4 жыл бұрын
Fagan Fulton - oh right. Understand
@torki01474 жыл бұрын
great, thanks.
@electriccars-EV4 жыл бұрын
Thanks
@loscartoso14 жыл бұрын
Muy buen accesorio Felicidades, tienes en venta Para una Africa twins $$
@ludsonlins4 жыл бұрын
Genial !!!!!
@ericksunga304 жыл бұрын
Very nice
@silviofontana36663 жыл бұрын
hope your side stand is stable
@jackmule15724 жыл бұрын
Awesome
@eriknash87832 жыл бұрын
Lol, this should be a safety video on how to use shop equipment as unsafely as possible... Cool idea and nice build, though!
@AfricaTwin-Stuff2 жыл бұрын
Ha! Thanks. It’s proved it’s worth as we use it when on tour to oil the chain.
@Lumpurbuger Жыл бұрын
Great product for your bumm
@testsiegerno19694 жыл бұрын
Cool
@kevinvadagnin77744 жыл бұрын
😀👍👍👍
@silentjellybean4 жыл бұрын
ultimate tool shop safety, you need to buy a vice lol
@AfricaTwin-Stuff4 жыл бұрын
Priestly Lotus - ha! Not entertaining to watch “safe” work!
@tucobenedico4 жыл бұрын
Imagine if this guy used both hands!...
@AfricaTwin-Stuff4 жыл бұрын
tucobenedico - ha! That would lead to twice as many mistakes!
@BoyFromMa3 жыл бұрын
6:06 be careful not to get you hand pinched by that V shaped part. You should not push it from so close to the middle.
@robbypeeters91512 жыл бұрын
Out of experience: you are going to need a bigger, broader foot to prevent the weight of the bike pushing the foot into soft ground, like dirt or grass.
@AfricaTwin-Stuff2 жыл бұрын
Out of experience I’ve found this one to be fine. Thanks.
@crispernator4 жыл бұрын
I bit the bullet mate went to honda and asked how much for a centre stand ? The first place quoted me 400+ and none in australia hmmm might be a while before this happens ,anyway looked on flee bay at all the chinese ones and decided to ring another honda dealer on the other side of town wow 250.00 from melbourne genuine honda part ordered on friday arrived at the store on wednesday i know who ill be dealing with , however i would still like to make one of those as you never know when you might need it so can i ask for the dimensions from you ie: lengths and size of tube and channel you used i have threaded rod from some distant project ive done and clark rubber and bunnings are just down the road for a foot and bolt .
@AfricaTwin-Stuff4 жыл бұрын
crispernator - stand specs? It’s not all that critical. I used scrap I had in the shed. 25mm box section of 1.6mm wall thickness. Length ? Total length to lift the bike. Wendy’s bike is lowered so hers fits her bike. The stand is in two parts mainly to aid storage. You could just use a single length of whatever to prop up the back wheel while the bike is on the centre stand.
@crispernator4 жыл бұрын
Good video mate but im a member of the S.W.A (shithouse welders association ) so mine would not be as neat as yours .
@AfricaTwin-Stuff4 жыл бұрын
crispernator - ha! Great club. Be proud ! I’m in the club next door - smells like shithouse welders.
@bmwsjt3 жыл бұрын
I guess I'm a member of the SWA, but I'm a great grinder!!!
@clivegreenall3094 жыл бұрын
Thanks for sharing. Now if you have any ideas for a small homemade jack system to lift my KLR650 ...... :-) Regards from S Africa Clive
@crispernator4 жыл бұрын
Gday mate i have never seen anything like that before watching that video again ,mmmaaaaaatttttttteeeeeee what are you doing with that grinder you got a good vice there use it or you will be known as the three fingered nc750 stuff . Anyway it could be a good solution to my problem for now grrrrrrr honda .
@AfricaTwin-Stuff4 жыл бұрын
crispernator - ha! Only professionals are careful with tools. Anyway, fingers grow back don’t they ?
@crispernator4 жыл бұрын
@@AfricaTwin-Stuff only if you can get them stitched back on quick like me hahaha
@crispernator4 жыл бұрын
@@AfricaTwin-Stuff not expensive have a look on flee bay you could make some money there
@MrTonifumi4 жыл бұрын
Love your workmanship and videos. But why can't you just move the bike back and forwards to oil the whole chain.... I've been doing that and it is not difficult at all.... Plus, now her bike is 250 grams heavier... Just sayin.
@jaywhoisit48634 жыл бұрын
Jesus man. I just use a bloody stick. Easy peasy.
@AfricaTwin-Stuff4 жыл бұрын
Jay Whoisit - yes a stick is way more practical but not as fun to make! 🤪
@3goldfinger4 жыл бұрын
I just made a centre stand for my Yamaha XV250. Can't even buy one. Didn't you just put a centre stand on your bike the other week.
@AfricaTwin-Stuff4 жыл бұрын
Michael Andersen - this is Wendy’s CB500X that doesn’t have a centre stand
@chinwakebhai3 ай бұрын
My kind of rider. If you can make it, why pay a Russian guy ?
@ginoasci28769 ай бұрын
you could have shown the last ten seconds of how you use the jack instead of recording yourself making it. are you lonely in your shop.
@AfricaTwin-Stuff9 ай бұрын
Oh! I didn’t realise I had forced you to watch. So sorry.
@IncredibleCisco10 ай бұрын
so much effort. useless. buy some 5$ old crutches and cut it. work done.
@AfricaTwin-Stuff10 ай бұрын
Ok. But we’re is the fun in that? 🤔
@IncredibleCisco10 ай бұрын
@@AfricaTwin-Stuff if this is a hobby sure why not. Iam happy to ride in my free time ;)