POV Shop Tour in under 10 minutes!!!

Рет қаралды 28,360

10 ай бұрын

I’ve been building my small garage shop for about 3 1/2 years now. I’ve implemented dozens of different efficiency and space saving techniques. From the sound attenuated dust collector closet,
to the 4‘ x 8‘ workstation with embedded bench planer, router, and table saw, to the incredibly utilized consumables closet. There’s so much to see! Please enjoy.

Пікірлер: 33

@brewbuilds 8 ай бұрын

Dude I have a 30x40 and people always tell me they are jealous of my space. And I always respond back with, (there are people who are working with a lot less space and it is way more efficient and cooler.) Your shop is a prime example! 👊🏻

@Dancing_Alone_wRentals 5 ай бұрын

tHanks for the short tour. I miss many shop tours because they are too long. Great shop!

@TheRuralGardener 8 ай бұрын

Love it love it love it…. So much I can take away for my own workshop. Thank you so much for sharing.

@sb917 5 ай бұрын

lovely job

@DaveHively 10 ай бұрын

Great shop layout, would like to see more on your work station.

@chrisdzisiak7540 10 ай бұрын

Terrific job! I’m just in the process of redeveloping my shop and my intention was walls of cleats. This only confirms what a good idea it is. Very well done ,my compliments.

@andrewpinson1268 8 ай бұрын

Love these shop tours. Watch some other shop tours and check out difference in camera movement. Now for the good. Excellent thought and making of utilizing every inch of space and it is organized. You out done me on the french cleats. Will have t put this on half speed and look at it again to steal some ideas.

@dngriffiths8105 10 ай бұрын

I love it! Your entire shop is brilliantly conceived and executed, Nate, with great intentionality (to use a current buzz word) and thoughtfulness applied throughout. Your use of limited space is exemplary and clever. And your application of French cleats -- including cleat boards hanging on cleats -- reminds me...of me. You've also done us the kindness of being succinct and concise in your video, which I appreciate. I've subscribed, and look forward to more of your content. Well done.

@kennethholmes9315 10 ай бұрын

Like the use of space.

@ABrazHouse 7 ай бұрын

Looks great! I am on the front end of configuring my garage into a woodworking shop!

@NateofHull 7 ай бұрын

Get on it brother! I just saw your channel. Your garage looks sweet!

@boboatner9021 6 ай бұрын

Well done! In regards to both the video and the shop. I just subscribed

@Kowalski94 10 ай бұрын

I love it ❤ Dream shop

@kelvinp7899 10 ай бұрын

Very nice, love your dust closet, might have to copy you,

@ArtigianoTek 6 ай бұрын

cool

@justgeo6889 10 ай бұрын

cool shop, im thinking of building myself one too. My problem is space, ive designed a 3 by 4 Meter workspace ( roughly 113 by 157 inches, im from EU :P ), since thats a rather small space ive decided to integrate a railing system on the floor for my tablesaw so i can move it to the wall when i dont need it also working as a workbench extension. that lumber rack is a great idea but i donno if i will be able to fit one in my small lil space but i guess imma see when the time comes.

@bigguix 10 ай бұрын

nice

@miketucker7466 10 ай бұрын

Nice organised and space Efficient for Americans - thought you guys all had huge shops

@createmomentum 10 ай бұрын

Thank you for the shop tour. Looks amazing. What lights do you have?

@NateofHull 10 ай бұрын

The lights are Barina 5000k. They’re 6’ lengths. I have 8 of these.

@kallan2255 9 ай бұрын

Just became subscriber #100 This channel is going places. Definitely one of the most pragmatic but excellent workshop setups I've seen.

@petenelson8136 9 ай бұрын

Just found your channel. Loved seeing your daughter work the planer (on a different video), and love how you organized your shop. I'm moving into my new shop in a couple of weeks. It's a garage on my new house and is 14'x32.5' long, so very close to what you have. The 32.5' is a bit mis leading because I've got a dog run of 3' on one end of the shop to let the dogs outside. My plan is to make this a miter station (dogs run under it to get out to the dog door) so usable yes, but only from the counter top up. I've been contemplating using French cleats throughout the shop, but never thought of using them to the extent you have, may have to consider that option. I've got 10' ceilings which I plan to put to use by having wood storage on the walls like you've done. Is there any advice you would share regarding what you'd do differently if you had to start all over again (as I am doing). I've been out of woodworking for about 20 years now, so I'm starting my shop with a blank slate = I'll have to make all my storage and tables from scratch. Looking forward to new content from you, you got a new subscriber here.

@NateofHull 9 ай бұрын

Sweet! Thanks man! So I’d only say to plywood and cleat all the walls. Sky’s the limit in regards to organizing, reorganizing, and new layouts as your shop evolves. This way you’re not locked into any one way. Then, I’d make cleats a bit more accurately than I initially did. I used three-quarter inch CDX plywood, which was a bit warped and so some of my rips of the 45° angles aren’t quite perfect. But if you found a plywood that’s a much more flat, you’d be able to rip them up into manageable sections first and then go back and rip the 45s. I’ve even thought about milling up a couple more sheets of cleats with birch ply and replacing what I have. Not that anything falls off the walls now or anything, but if you’re gonna live with it for years and years to come, maybe just spend a little extra time, and a little extra on the material that you’re gonna put up.

@tkorkunckaya 4 ай бұрын

Nice tour besides the slippers and annoying slipper noise.

@gregnelson7900 9 ай бұрын

Your shop looks great, but your workbench is especially awesome! Do you have any plans available for it?

@NateofHull 9 ай бұрын

I don’t have plans for anything. I just made them up as I went. But were you referring to the flip down work bench? Or the workstation on wheels with the table saw, router table, and planer?

@gregnelson7900 9 ай бұрын

@@NateofHull I was referring to the latter, but both look great. I’ll have to use them as inspiration.

@characterbuilding8866 9 ай бұрын

Right. I ask because a few people have been asking for plans. I don't really know if that will happen, but i will say that i do have lots of upgrades coming up this winter. when those are done i'll post another video for you. thanks for all the compliments!@@gregnelson7900