Ultimate Shop Tour

Рет қаралды 20,342

Күн бұрын

I retired from the U.S. Marine Corps in 2019. After moving around the world for over 30 years, I have enjoyed settling down these past three years and FINALLY getting a (mostly) proper shop up and running! Although there is still some work to do, I am grateful to be able to work comfortably and efficiently in this space.
If you’re interested in commissioning a custom, heirloom quality piece, please reach out to me through my website: cleancutwoodworks.com/
Follow me on Instagram: cleancutwoo...
Follow me on Facebook: / 100064251274866
Video Links:
The Original BOOM Video: • Shop Made Festool Dust...
My Shaker Bench Build: • Shaker Workbench Build...
Product Links:
Band Saw: amzn.to/40SVB5Q
Band Saw Fence: amzn.to/3YEZcTz
Band Saw Guides: www.carterproducts.com/lag-01-...
Fence Micro Adjust: amzn.to/3jSL5KU
Miter Saw: amzn.to/3HTzZNR
Router Table: amzn.to/3Yp0BNP
Router Table Stock Guides: amzn.to/3xgV6oA
Router Dust Box: amzn.to/3YG4766
Table Saw: amzn.to/40IqCJz
Table Saw Stock Guides: amzn.to/3E1HMIb
Drum Sander: amzn.to/40SHld1
Oscillating Spindle Sander: amzn.to/3HTAmbd
Dust Collector (New Model): amzn.to/40Irg9X
Blast Gates: amzn.to/3XpW1xi
Air Filtration System: amzn.to/3HRSUJ2
Dust Extractor: amzn.to/3jUelkI
Cyclone Separator: amzn.to/40ML0Jx
Boom Vac Hose: amzn.to/3RRMI8g
Boom Vac Hose Sleeve: amzn.to/3K1Gq4c
Festool Hose End: amzn.to/3YH3qJR
Jointer/Planer: www.grizzly.com/products/griz...
Vise Hardware:
www.benchcrafted.com/glide
www.lie-nielsen.com/nodes/407...
Ray Journigan: www.thecolonialcraftsman.com/
Woodcraft of Norfolk: www.woodcraft.com/stores/virg...
Video recorded with iPhone 13 Pro and edited with LumaFusion on iPad Pro.
0:00 - Intro
01:33 - Jointer/Planer
03:06 - Dust Collection
05:09 - The Boom
07:54 - Band Saw
10:01 - Table Saw
12:37 - Drum Sander
13:39 - Oscillating Spindle Sander
14:35 - Router Table
15:13 - Drill Press
16:02 - Air Filtration System
17:12 - Electrical
18:28 - MiniSplit A/C
19:04 - Wall Disaster
20:43 - Hand Planes
22:09 - The Bench
23:35 - Conclusion
#shoptour #woodworker #tools

Пікірлер: 46

@josephhaddakin7095 Ай бұрын

4:48 I also have my license plates hung in my garage. When I left NC in 1992, they told me that when I registered in the next State, I had to mail my NC plates back. If I didn't, they would have an arrest warrant made. My NC plate is hanging in my garage. lol.

@wesleyevans799 Жыл бұрын

Suggestion for that wall - move your Craftsman tool chest to the left (near the corner) and build something new to incorporate all your smaller collections into one organized space making allowance for the plumbing as necessary behind a toe kick. Great looking, well thought out shop, looks like you have fun there!! As you should. Keep up your good work.

@cleancutwoodworks Жыл бұрын

Thanks so much for the suggestion! I will definitely explore this idea once I get some down, “shop” time 👍👊

@briannelson4122 Жыл бұрын

Your videos are just content without narration, just the work, which is great! So this is a welcomed departure, thanks for putting a voice to the work and letting us in! Your work is inspiring, love the furniture builds (who doesn't love walnut!!).

@johnjudispicer7175 11 ай бұрын

I like the plane till and using screws instead of glue is brilliant so you have the flexibility to move things around

@pmelchman Жыл бұрын

Great shop Ben. It is always interesting to see an others craftsman's' workshop. Funny thing is, it was like walking around my shop with just a few exceptions. As far as the disaster wall, I too have the Craftsman toolbox,...( cant live without it) all my nuts, bolts, washers, and odd stuff I made a 4 cabinets with 5 drawers each for all my small woodworking items. I have a miter saw but it sits under my 19-38 sander ( one of the best investments my shop). I only use it for construction projects. Mini split was a game changer for me. I spent way too many summers sweating my but off, and breathing torpedo heater fumes many a day (Cleveland, Oh). Now, 68 year around. I had to move many items up on the wall b/c floor space is just to valuable (21' x 22') The biggest obstacle in my shop now is my workbench (21st Century Work Bench made by Bob Lang from Fine Woodworking Mag). It's takes up a ton of floor space...

@cleancutwoodworks Жыл бұрын

Glad to hear I’m not alone! I think the trap I’m in is not letting go of the things I’ve had for so long. I’m sure your bench is a thing of beauty, but yeah- space is important too. My new bench is actually smaller than my old one. 😮

@TWC6724 Жыл бұрын

Love the shop. And love the shirt!! As a woodworker myself I totally agree!!

@davidclay5588 Жыл бұрын

Hello Ben, nice shop set up and video. I am also a woodworker and retired Army who just moved away from Williamsburg, VA and moved to the Inland Northwest, Liberty Lake, WA. I am building my new shop in our 3 1/2 car garage. My shop in VA was also in a small 2 car garage. I will be following you on your site. Dave

@richd8537 Жыл бұрын

Great tour Ben! Proof that you don't need 6000 square feet to do amazing work!

@johndingmansr.5895 11 ай бұрын

Fantastic Shop Tour! You have put together a great space and I have seen your work is is awesome!!!

@jonlambert2219 Жыл бұрын

Good no nonsense tour, cheers from down under.

@nspctor7729 Жыл бұрын

I'd install the air hose reel on the ceiling with the end above head clearance, don't think it would hurt having an air supply for future air tools. Didn't see a sharpening station. Cheers,

@cleancutwoodworks Жыл бұрын

Thanks for watching… and for the tips! You’re right. I should’ve mentioned my sharpening process, which is pretty much the Paul Sellers method. Three diamond stones mounted on one board which I pull out and secure in the twin screw vise.

@gdreclaimed5442 Жыл бұрын

Great shop tour! I agree with your thoughts on the out feed table, no need to waste the space when you have a nice workbench. For the wall that you are not happy with I think just adding a second rolling toolbox would probably be simple and clean. You might even be able to hide a hose real in the bottom drawer of it.

@jamesdabney9479 Жыл бұрын

Great shop tour......Shop is laid out well ...... Thanks again for the tour.

@cleancutwoodworks Жыл бұрын

Thanks for watching!

@Wood_Slice Жыл бұрын

Phenomenal shop. I just moved into a 3 car garage and need to set it up.

@cleancutwoodworks Жыл бұрын

Jealous! That extra space will be nice. The one thing I really wish I had room for is a dedicated assembly table. 🙁

@CarterProducts Жыл бұрын

Great looking shop!

@projectwood7221 Жыл бұрын

Awesome shop my friend.. continued success to your channel

@kennethholmes9315 Жыл бұрын

Love the tee shirt. Nice shop to. Have a good one.

@mmmdesignllc 9 ай бұрын

I love your video format. not a lot of fluff. I would like longer videos and maybe some text on material selection. Just found your channel and I love it. I'm originally from Tidewater. Take care.

@cleancutwoodworks 9 ай бұрын

Thanks for watching and welcome aboard 👍👊

@tpaulsmith7194 Жыл бұрын

Enjoyed the shop tour, but loved the video quality. Great job.

@gerardcarr9140 Жыл бұрын

Thanks for sharing.

@scottkapton4658 6 ай бұрын

Fantastic Garage shop! I am upgrading as of this writing from a 16 x 20 shop to a full blown 32 x 40 one man operation. awesome job on using that small footprint. Everything in a small shop is a compromise, but it looks like you are good to go. One question... assembly table? glue ups? where do you handle that work? Scott Kapton Powhatan VA

@cleancutwoodworks 6 ай бұрын

Thanks 👍 Yeah, assembly table is just not an option in this space. I do some glue-ups on the outfeed table (phenolic plywood) and some on the bench (rubio monocoat). Not ideal, but the glue pops right off both surfaces with a dull card scraper.

@abiraffawoodwork Жыл бұрын

Nice shop 👍👍

@DreamWorksWoodShop Жыл бұрын

Great Shop Tour Ben! Thanks for sharing. Oh by the way nice T shirt. “Stop making river tables” 😂 Too funny I may need to get one of those! Look forward to following along, wishing you continued success!

@cleancutwoodworks Жыл бұрын

Thanks 👍

@user-mn6jc3vm1n 6 ай бұрын

Love the shirt - true, true, true.

@laurac4562 Жыл бұрын

good video

@lamairepr Жыл бұрын

Very good video. I am retired and been getting into word working for about 1.5 years. I went with the WEN for my Air quality my shop is 12x16 i have it built out pretty good. You make a great point of keeping it just shop stuff. I’m going to look into the Jet 1000C I believe it was you showed in the video. New sub here for sure, looking forward to your furniture videos, that’s what i eventually want to do is more furniture stuff. Thanks again for opening up your shop for us!

@cleancutwoodworks Жыл бұрын

Thanks for your support! Yes, I will definitely be adding more ‘build’ videos as I complete the projects - new one coming out in a few days 👍👊

@lamairepr Жыл бұрын

@@cleancutwoodworks 👊

@JWick-ry7wf Жыл бұрын

From what I have seen you are doing great, I hope you don’t get wrapped up in all the tool companies wanting you to turn your channel into a sales channel for them although I do watch what tools people are using. I do buy Lie-Nielsen stuff. So far I think you a very good channel, best of luck I’ll be watching !!!

@glenngulley1375 Жыл бұрын

Love the shirt lol! I had honestly looked hard at getting that jointer planer combo and ended up getting a 15inch planer and 8 inch jointer. Nice looking setup and tool selection. I was curious what brand are the spoke shaves you have, all I have is an old stanley and really like the look of those.

@cleancutwoodworks Жыл бұрын

Thanks for watching! The spokeshaves are Veritas (Lee Valley).

@nnsycadder1 Жыл бұрын

Nice shop, love the shirt. I thought you looked familiar, I was in the pen turning class at Woodcraft this past weekend when you came in looking for something (bandsaw or drill press maybe?). Followed.

@cleancutwoodworks Жыл бұрын

Right on

@leatherbydragonfly Жыл бұрын

Dido what Patrick said. 🦅🌎 ⚓

@thomasmorrison5852 9 ай бұрын

Don’t say friging

@cleancutwoodworks 9 ай бұрын

Pretty sure it was “frickin” most of the time.

@cabinetscarpentry3915 Жыл бұрын

U were doing good until u bought saw stop and festool 😥 I've been in the carpentry/cabinetry/construction industry for 40 years and I can say comfortably that almost no one in the industry uses them

@cleancutwoodworks Жыл бұрын

Thanks for watching! Yep - totally agree. If I were in the carpentry/cabinetry/construction business I probably wouldn’t have spent the money on the nice stuff.