Power Brake Conversion Kit (Automatic)

Power Brake Conversion Kit (Automatic) | 1965-1966 Mustang

Рет қаралды 155,956

CJ Pony Parts

Күн бұрын

Пікірлер: 86

@wakjob961 7 жыл бұрын

Thank you for giving attention to the less popular i6 mustangs. These videos are incredible.

@tamerelectronics4951 8 жыл бұрын

I love the 65' Mustang Project Car, please post more videos!! I would love to see a dual barrel carb install with headers; maybe even a port divider... (maybe Clifford or equal) .. Thanks!!!

@jerrynavarro9580 5 жыл бұрын

Smart safe upgrade, on any old mustang!

@tonyspiga2505 7 жыл бұрын

de tous ceux que j'ai vu tu fait les meilleur vidéo tu montre bien le travail bravo et pas trop de parler merci et bravo

@davinvictor1602 8 жыл бұрын

I was wondering if you guys could do a how to on installing a 68 Coupe vinyl top

@scottmaziar4136 11 ай бұрын

i enjoyed this video

@russellallan3862 2 жыл бұрын

Should Google (problems with power disc brake conversion kit 1965 Mustang) Before purchasing issues with pedal to the floor lots of complaints with no fix

@TheAnonymous1one 5 жыл бұрын

Ive seen this kit from other vendors and instructions say the pedal rod needs to mounted 1” below the original location on the pedal assembly. I see it wasnt done here. Is it required? What does moving 1” down do?

@jimmyc5438 5 жыл бұрын

I would like to do this to my 64 1/2 with 6-cylinder, but mine is a 4-speed manual, you mentioned the kit is for an automatic trans car, is there a similar kit for manual trans?

@afa304 10 ай бұрын

Can you start filming brake videos for manual 289's? Automatics are cool but those of us with Mustangs need to know too.

@TheBoxerbaby775 5 жыл бұрын

What exactly was the adapter size for 65 289 straight 6?

@starwarso3123 2 жыл бұрын

Might have missed it but how do you connect the warning light? It’s a 1 wire and the factory has 2

@stuartdavis758 2 жыл бұрын

Do you have a link or part number for the adapter for the rear brake line to the rear of the proportion valve?

@Deucealive75 6 жыл бұрын

What size tires did you use on this car?

@tomfowler9577 4 жыл бұрын

does the piston adapter come in the kit?

@everythingthatruns9254 7 жыл бұрын

can this be done without the convo valve?

@cford97cobra 5 жыл бұрын

What is the rear adapter size?

@gotchurebeacons-gaming9023 Жыл бұрын

I have a 4 speed standard transmission, will this work?

@ettoretavilla3081 Жыл бұрын

hi can you buy the Piston Adaptor separetly please ? if so where from thanks 11:42

@scottbeasley578 8 ай бұрын

I actually installed this kit on my 65 Mustang and the brake lights will just come on by themselves at times and stay on. Would you suggest adjusting the push rod?

@jasonsmith1449 6 жыл бұрын

I have over heat issues i have 1966 Ford Mustang with inline 6 with air conditioning I live in Arizona it gets hot is their auxiliary fan to help the air coditioning and from getting hot

@bishop5537 5 жыл бұрын

Roll the windows down...

@Mrpdw1 8 күн бұрын

For anyone that doesn’t have a pedal after installation, install a 10lb residual check valve

@bennickles9226 2 жыл бұрын

Why doesn't this fit a manual transmission? My guess is, because of the linkage for the clutch. If I swap the linkage for a cable, can I use it on a manual transmission?

@stubby1122 Жыл бұрын

Hard to believe that the best they can do for a mounting bracket.

@matthewleach7044 2 жыл бұрын

What is the part number of the adapter for the rear brake line attachment to the proportioning valve? I’m having a terrible time finding the correct part.

@ryanshowers9020 Жыл бұрын

Did you ever find the correct adapter? I’m have the same situation right now and can’t find one that is right anywhere.

@alejandrorellana350 Жыл бұрын

Manual transmision video exists?

@tompreciado863 3 жыл бұрын

Did you have to bleed the proportioning valve? You never said anything about it

@JohnD3R 2 жыл бұрын

Just installed this on my car. I’ve got no brakes, yet I’ve pushed the booster pushrod out as far as I can. I’ve bled my brakes four times

@frankmartinez6684 2 жыл бұрын

I've read that the rod has to attach an 1" under regular placement on the pedal assembly

@eddiemcgregor3685 11 ай бұрын

Same here! What was your resolve? How did you get past the issue? Thanks, Eddie

@dirtymonkey-ee7km 10 ай бұрын

Same here!!!

@jasonwoodbury6746 Жыл бұрын

The link doesn't work for the kit you link in the description

@bishop5537 5 жыл бұрын

Is this going to work with a 289 V8 with an AOD transmission? Also, I have drum brakes all around...

@MP72792 3 жыл бұрын

I would like to know the same thing, I have a 66 289 v8.

@21guillotine Ай бұрын

@@MP72792 same here

@lukep126 4 жыл бұрын

So this should fit to a falcon as well with no problem?

@cjponyparts 4 жыл бұрын

I would think so but we have never tried to install on a Falcon so I cannot say for sure.

@AbelCastillo93 7 жыл бұрын

on the master Cylinder which port is for the front brakes and which are for rear?

@Zerogivengarage 7 жыл бұрын

The rear port is for the front brakes.

@AbelCastillo93 7 жыл бұрын

Bill Tumas which is the one with the smaller resevoir right?

@AbelCastillo93 7 жыл бұрын

Bill Tumas. w/ master cylinder installed, the port closer to the power brake vacuum is for the rear brakes? and the second port (farthest from power brake vacuum ) is for the front brakes? i want to make sure i line up correctly

@Zerogivengarage 7 жыл бұрын

The port closest to the front of the car is for the rear, the port closest to the firewall is the front.

@frankmartinez6684 2 жыл бұрын

Why do we not address the 1" lower issue with the kit

@fbabyfbaby4658 Жыл бұрын

Same problem I'm having

@lorenzoalvarezjr8361 Жыл бұрын

Where did you connect to get the vacuum??

@cjponyparts Жыл бұрын

The manifold.

@vaioskaliakoudas6388 7 жыл бұрын

Did the early mustangs come w/ a I6 right from the factory 'cause it's my 1st time I see one

@1575murray 6 жыл бұрын

They did (170 CID in 1964 and 200 CID afterwards). Ford discontinued the I6 during the 1970's only to reintroduce it with the Fox body models in 1979 due to a shortage of V6 engines.

@hackmattr 5 жыл бұрын

I have a 64.5 that originally came with a 170ci I6. That was replaced with a 200ci I6.

@canajamsful 3 жыл бұрын

Why won’t it work on a manual transmission?

@jonahgross9447 7 ай бұрын

There is a small fitting at 8:50 for the rear brake line. It looks to be an adapter of some kind. Can anyone help me find it. I don’t know where to get that

@Mrpdw1 8 күн бұрын

Still looking?

@jonahgross9447 8 күн бұрын

@@Mrpdw1 not anymore, thanks tho

@jr23707 7 ай бұрын

Master cylinder

@marvinmenendez392 3 жыл бұрын

I have a 65 falcon futura i6 is it the same installation?

@cjponyparts 3 жыл бұрын

I have not done one on a Falcon but I suspect it will be very similar.

@jacobknox7957 8 жыл бұрын

Can you add airbags in a 1965 mustang?

@vsGoliath96 8 жыл бұрын

Airbags are inherently designed into the car itself. Short answer is no, not a chance.

@mattdugan2000 5 жыл бұрын

Go buy a mustang designed with air bags.

@Galactusz007 2 ай бұрын

lol

@VidalVillarreal 8 жыл бұрын

Great video as always Bill. Question, what do you recommend for a front disk brake conversion for a 66' Mustang with a manual transmission. I have the OEM style single bowl now, four corner drum and the car was originally an automatic. Thanks for your help!

@Zerogivengarage 8 жыл бұрын

You can still convert to a dual bowl but you will have to stick with manual brakes.

@VidalVillarreal 8 жыл бұрын

Why would I not be able to convert to front disk? Something like this...www.cjponyparts.com/scott-drake-dual-bowl-master-cylinder-conversion-non-power-front-disc-brakes-kit-1965-1966/p/DBCA120DR/

@Zerogivengarage 8 жыл бұрын

that's fine I was just saying you can't do power

@bearatts 7 жыл бұрын

Bill Tumas I have an original 3 speed car, is there a power conversion like this for it, and if so, what is the difference compared to the one in this video?

@Zerogivengarage 7 жыл бұрын

There is no dual bowl power conversion that will clear the original three speed linkage. There is a single bowl version only. www.cjponyparts.com/master-power-brake-conversion-kit-single-bowl-manual-transmission-1965-1966/p/BBCK1/

@alejandrorellana350 Жыл бұрын

Only automatic? Not standard?

@markpoltorak3346 7 жыл бұрын

Why will this not fiT a manual transmission car?

@ScottSellsSoCal 6 жыл бұрын

Mark Poltorak i

@timdoyle2871 5 жыл бұрын

nice video. However, why do we need the background music? its just noise!!

@bishop5537 5 жыл бұрын

Its background music. That's the point. Deal with it or make your own videos jerk.

@benbenboy34860 Жыл бұрын

Can’t get brake light switch to go off

@Mrpdw1 9 күн бұрын

Shave the pushrod

@paulferrara9079 6 ай бұрын

Love the content. please pot that music down or get rid of it. very distracting. : )

@rosemarykerr903 7 ай бұрын

@granitemanny 8 жыл бұрын

they inflate thh price

@Zerogivengarage 8 жыл бұрын

+Manuel Acosta How do you figure? This kit is close to $200 cheaper than many comparable kits on the market.

@jth1987leb 8 жыл бұрын

Really lazy bracket design.

@Coyote.five.0 8 жыл бұрын

first.

@kerryroberts4540 8 жыл бұрын

why not a 67 conversion everything 65 66 that you guys do... do a 67

@cjponyparts 8 жыл бұрын

We did do a conversion kit install on a '68, which would be the same for your '67 kzfaq.info/get/bejne/iZ5do9Wirru7kWQ.html

@peterkresse4613 2 жыл бұрын

The background music is ridiculous and and serves no purpose.