power floating render sand and cement plastering machine

Рет қаралды 5,569

2 жыл бұрын

power floating my rendering my finish coat of sand and cement being floated by the refina powerfloat and my hand float to get it finished up :) using the tools to my advantage using the powerfloat to do the hard work and the hand float to do the softer areas to get them in and smooth sand and cement work is hard enough as it is so best to try to work smarter not harder #powerfloat #render #sandandcement
Popular diy videos on the channel
How to remove stud wall • How to Remove a Stud W...
steamer vs sponge wall paper • Removing Wallpaper: St...
how to remove tiles and plasterboard • HOW TO REMOVE WALL TIL...
how to mix screed • How To Make and Mix Fl...
stop birds nesting in roof • stop birds nesting in ...
how to mix concrete • How To Mix Concrete - ...
HOW TO fit / install expansion joints for cement render DIY plastering ( control joints
• HOW TO fit / install ...
How to sand and cement render concrete block wall 1st coat scratch coat DIY
• How to sand and cement...
How to make black cement mortar
• How to make black ceme...
how to mix cement mortar small amounts by hand click here for the demo = / bqomoxocdr
HOW TO RENDER A WALL READY FOR PLASTER OR TILES (OLD WALL) • HOW TO RENDER A WALL R...
Spear and Jackson bucket trowel that is still going strong for me after many years = amzn.to/2pcpReS
The pointsman hawk = amzn.to/2O1nKmp
Refina trowel pack and holder = amzn.to/33PbCvi
All amazon links are affiliated links will cost no extra to buy from but we might get a %
tools links direct
www.refina.co.uk/
How to sand and cement render concrete block wall 1st coat scratch coat DIY
• How to sand and cement...
Find us and like us here
/ macplasterin. .
Tweet us here
/ macplastering
/ macplasteringservices
our amazon store affiliate www.amazon.co.uk/shop/macplas...

Пікірлер: 32

@Joe-jv5mm Жыл бұрын

Just found the video, yeah definitely more rendering video's on using the cordless power float, cordless is the Future for All Trade's

@macplastering Жыл бұрын

Yea need to get more done on it 100 percent

@woodman8827 Жыл бұрын

Top job lad

@macplastering Жыл бұрын

Thank you buddy :) hope your well :)

@mickdowney3363 2 жыл бұрын

Rambo Tools , do Corded power float for around 250 pound, handy tool when rendering , you soon get the knack of the leads, a lot cheaper. Great advice on your video Mac keep them coming.

@macplastering 2 жыл бұрын

Thanks mick

@Saintathantwinpeaks 16 күн бұрын

Corded is the best for Planet Earth. They are more powerful, last so much longer, are far more efficient, and are far less destructive to our planet's environment. We need to do all we can to look after the health and wellbeing of our children, our grandchildren and beyond - humans are multiplying like never before, and producing more and more waste than ever before. We're on the left side of a parabola as far as the damage we are doing, and the drop-off on the right side of the parabola won't represent a decrease in this damage, it will be the demise of this planet. Ever wonder why there's so much money being ploughed into Space just now, the academics and the rich know we're killing this planet and are planning the escape when it's required.

@emmamccartney8899 2 жыл бұрын

class vid!!

@macplastering 2 жыл бұрын

Thanks

@TheMcBlokeShow 2 жыл бұрын

EPIC to see you're still uploading, mate!!

@macplastering 2 жыл бұрын

Every sunday haha thanks for watching and supporting mean so much mate

@TheMcBlokeShow 2 жыл бұрын

@@macplastering, no problem, mate! Do you remember me, man?? I reached out to you SIX years ago. :)

@TheMcBlokeShow 2 жыл бұрын

@@macplastering, foudn the video I watched way back when. It's titled "500 Subscribers". XD

@macplastering 2 жыл бұрын

@@TheMcBlokeShow was for sure at the start of the journey =)

@macplastering 2 жыл бұрын

@@TheMcBlokeShow i do seem to remember your icon what where we talking about at the start mate?

@stevenprice4969 2 жыл бұрын

Great vid mate. Can you do a breakdown of the tool please? How to change the heads etc? I’ve got a cordless Milwaukee mixer which has a speed adjuster which I think I can turn into a powerfloat if I can see how the floats and sponges connect. Would appreciate any help 👍🏼

@macplastering 2 жыл бұрын

Will try make a quick one for you mate in mean time one of the other power float videos near end shows it up close and the unboxing should

@CheckFred 2 жыл бұрын

I think the BEST!! use for that powerfloat Mac - is to turn it into an EV Uni-Cycle 👍🤠

@macplastering 2 жыл бұрын

That be a funny video mate

@georgeomalley6066 2 жыл бұрын

Good introduction on using power floating, Quick Question on Wet dashing mix ratios, how many shovel's of lime to a bag of wet dash, Do you let your dash sour up or use straight away, Thank You in advanced , still Learning

@macplastering 2 жыл бұрын

I done use lime mate i have some wet dash videos on way but find if you take time mixing it comes out nice

@jarlathgeraghty6572 2 жыл бұрын

Thinking of getting 1

@macplastering 2 жыл бұрын

Expensive but if loads of rendering or big walls worth it i would say mate

@jamiec4108 Жыл бұрын

Hi Mac, is it the black plastic float disc you use for rubbing up sand and cement? Cheers

@macplastering Жыл бұрын

U can do but you can also use the sponges they seem to work just as well most times mate

@jamiec4108 Жыл бұрын

@@macplastering ok Cheers mate have u ever tried some of the cheaper power floats on the market? Just wondered what the difference was

@macplastering Жыл бұрын

@@jamiec4108 Never have mate just this one so far

@microcementlacalamijasspai8269 7 ай бұрын

Hav3 a small mixing whisk has anybody tried to fit the sponges on them do they fit

@pauldavidson7442 6 ай бұрын

Wat u think any videos ive watched of them being used there getting alot of float marks with it

@macplastering 6 ай бұрын

I found just using the sponge is as good as floating it rubs it up well

@pauldavidson7442 6 ай бұрын

@macplastering was thinking about buying one but don't no about it I've watched videos not of urself but of other one's using it the minute the sun hit it marks all over the walls an u no urself not worse in doing a big job an float marks all over it cat looking lol

@macplastering 6 ай бұрын

@@pauldavidson7442 yea you wont want a wall like that haha I like to use it when gear is pretty dry so it cant dig in again always have the hand tools near me I did find the coarse sponge easier to use than the plastic at the start