In this video we remove the headlight from our Range Rover L322 2006 and also change the bulbs. We also show you how to change the headlight from RHD to LHD
Пікірлер: 47
@gregmassiff22108 ай бұрын
Я на своем RR 3.6 TD в 40 градусов мороза 200 летел.Люблю его! Видео полезное, спасибо парни, всегда так лампочки меняю .
@freedom90417 жыл бұрын
Finally something that I've been waiting for quite sometime.
@L6637 жыл бұрын
Good things come to the those that wait ! Glad it helped !
@mj-pj2bw3 жыл бұрын
Still relevant , just saved me buying 2 eu headlights , thanks guys
@simonjefferson3 жыл бұрын
If only we could get to Europe ! Glad it helped !
@lucas99ro6 жыл бұрын
Thank you for your tutorial. It helps a lot! I have just saved 600€ in a few minutes. Thanks again!
@453421abcdefg123455 жыл бұрын
Very many thanks for this video ! I have not seen any other guide to delving into the mysteries of the RR headlights, and to have found where the headlight beam deflector lives is an extra bonus, although I think I have to buy Right Hand Dip headlights to register it to use it in France.
@thefunkyt Жыл бұрын
Thank you for this info! I had no idea how to start that and you made what I thought was an afternoon job into a 15 minute job!!!
@L663 Жыл бұрын
Glad it was helpful!
@MrOlegalis695 жыл бұрын
You guys are the best!! Haven't seen a video on the gas door..I own a 08 hse..the gas door won't lock when I lock the vehicle...thanks in advance 👍 Atlanta Ga
@Dubyaf6 жыл бұрын
To replace the Xenon bulb do you replace just the glass bulb or also the silver box on the bottom of the bulb?
@russelllester214 Жыл бұрын
Thanks so much guys! Brilliantly helpful.
@L663 Жыл бұрын
Our pleasure!
@troycollins29023 жыл бұрын
Good job.. I really learn a lot today
@boblong67965 жыл бұрын
Nice thanks for the insight
@Bikerboythousand4 жыл бұрын
Great video. If you do change the sidelight bulb for LED then i would disable the adaptive lighting (corner lights) as LEDs don't like heat and those adaptive lights get very hot unless you change the H8 bulbs for LED too
@billgaytes68455 жыл бұрын
UPDATE: for all you "lucky" people to have the LED headlight (2011 on) you have to remove the bumper to get to a bolt that is below the indicator.
@tamtruong28155 жыл бұрын
Do you know where to buy just the reversing camera
@modifiedbear6178 Жыл бұрын
Is this an adaptive headlight assembly? If not, do you know if it's the same process to change the bulb on an adaptive headlight assembly?
@marcogarcia175 жыл бұрын
Hi i seen all your videos and they have helped me with my own L322 i recommend your videos to who ever drives a range rover i have a question what size is the hid running lights? And tge high beams
@L6635 жыл бұрын
Hi - this depends a little on the year etc of your car - a website that is good for checking this is am-application.osram.info/en
@goforward11493 жыл бұрын
One tip... do not pull the release levers on the light assembly too much. Just one click should do it..learned it in hard way...
@jaredsvans62932 жыл бұрын
What type of bulb? Says d1s but not same connector
@mitchellpanes63632 жыл бұрын
Would this be a similar process on a 2005 hse headlights?
@chadjones996 жыл бұрын
so H-8 , T-10 , and what are the other bulbs ?
@coolasice47504 жыл бұрын
Hi, I followed your videos when I changed my bulbs on my L320 Range Rover Sport.. I'm wanting to know, do the headlight lenses come apart as I'm wanting to give mine a good clean as they've misted up, and cleaning them on the outside doesn't really work. I'm hoping the lenses can come apart?. Thanks
@L6634 жыл бұрын
Hi - they sure do - see this video kzfaq.info/get/bejne/opphict8upO0Znk.html We have new lenses being manufactured so maybe wait a few ( 8 ish ) weeks and fit new ones ?
@coolasice47504 жыл бұрын
@@L663 Thanks for the reply much aoprecaite it. 👍
@samrodian9192 жыл бұрын
According to the Land Rover drivers handbook page 263 you have to release it Anticlockwise.
@jasonlee32915 жыл бұрын
What do you call the screwdriver that you are using with the ratchet mechanism at the top of the handle? I searched online but can't find it at all.
@L6634 жыл бұрын
Its a standard screwdriver with a hex end on it, we are using a rachet spanner to give us some leverage.
@adzthewise7 жыл бұрын
No link for grill removal! Otherwise thanks for the vid!
@rodneymcmillan67177 жыл бұрын
what kind of light does the dip beam take, H-7 like the main beam?
@boblong67965 жыл бұрын
Dipped light is a d1s or d3s. High beam or main beam h7. Cornering light h8 or h11
@Tefy_12124 жыл бұрын
What if the entire light just doesn’t turn on?
@jimmitchell3064 жыл бұрын
Morning guys.. First of all thank u for some amazing info on the old l322's... Second the screwdriver with the ratchet build in the handle....... And where did get it from??
@L6634 жыл бұрын
I am puzzled - i didnt know we had this - but it does sound like a ratchet screw driver - i will ask Ian !
@coreysingleton21423 жыл бұрын
I didn't see you guys change the low beam light I only saw you take it out
@mt-emo88823 жыл бұрын
is this same structure with l322 2002 ?
@L6633 жыл бұрын
Sadly no !
@anthonyfrantzis58446 жыл бұрын
How do u remove the plastic off?
@L6636 жыл бұрын
Hi - do you mean remove the plastic lens from the headlight ?
@anthonyfrantzis58446 жыл бұрын
powerfulukltd yesss. I have a 2003 discovery
@anthonyfrantzis58446 жыл бұрын
powerfulukltd yesss I have a 2003 discovery
@L6636 жыл бұрын
Hi - check our our other video kzfaq.info/get/bejne/qbtzZKeAv9y0mWQ.html
@allenwalton453 Жыл бұрын
At 4:21 you made a mistake - dip beam is first, then main beam.