We are happy to be of assistance! Happy Halloween! :)

Mike Morgan buy the set package low beam and high beam led light

No, upgrading your lighting will not void your vehicles warranty, as it is protected by the Magnuson-Moss Act. I have linked some information on this law below for your convenience. www.impalaclub.com/naisso/magmoss.htm

Mike Morgan did you change the headlights or just interior lighting? Wondering if these headlights work for 2017 cry exl

Thanks for the suggestions! We will definitely keep them in mind for future video shoots.

Thanks for watching!

You are too kind😍. Thanks so much for watching!

Happy to hear! Thanks for tuning in!

We truly appreciate the kind words and your support!

Glad to hear. Thanks for watching!

Glad it was helpful! Thanks for your feedback and support!

Thanks!

Thanks for the input!

Hi! Yes your 2013 CR-V would use the same fog light installation shown in this video.

Thanks!

We will keep an eye out for a 2017 CR-V out here in Los Angeles for a video shoot. However, the installation process should be very similar, if not identical to as shown in the video. The only major difference would be physically locating your halogen bulb.

Thank you for the suggestion. We will keep an eye our for a 2017-2018 CR-V out here in Los Angeles for an updated video. However, the installation process should be identical to as shown in this video. The only major difference would be physically accessing your halogen bulb.

The high beam installation would be virtually identical to the lows. The only major difference would be physically locating your halogen bulb. You can find the correct kit here: www.precisionled.com/premium-9005-cree-hl-gl-headlight-led.html

There are many factors and many upgrades to headlight housings over the years that help mitigate any glare to oncoming drivers. It is more or less the color of the light which causes distraction and not the actual brightness intensity itself. If you notice, the most distracting lights to see on the road are the blue HID lights which cause a lot of glare for the human eye, whereas you probably never noticed the 6000K or 8000K lights on the road because they are more natural to the human eye.

No problem, thank you for the support.

Yes, that is correct, the power connector comes included in the box. The kits linked in the description comes with everything you will need to upgrade your headlights and fog lights to LED.

If it is easier for you, feel free to do that instead! We wanted to be able to show the installation process very clearly, which is why we chose to use the method that we did.

I do apologize for the confusion, but the CREE H11 product is currently on backorder for week, so the product has been disabled. However, I would recommend checking back in a week or so, and it should be back up. We thank you for your patience.

No you do not, as our kits are manufactured for your stock CR-V headlight housing. You do not have to swap your housing for a different kind. Also, our LEDs actually run at a lower temperature than your halogen bulbs. As long as the bulb is installed properly, you do not have anything to worry about.

For the highs, you would install this kit here: www.precisionled.com/premium-9005-cree-led-headlights.html If the high beam comes with a dust cover, our ballasts are small enough to store in the housing and place the cover over it. If it does not come with a dust cover, you can zip tie the ballast to the frame or 3M mount it to the side wall.

That is absolutely correct. The 2012-2014 models use the H4 dual beam LED fitment. The 2015+ would use the H11. However, the installation process is identical, and the video applies to both generations. You can see this info reflect off of the links in the description of the video.

Everything should fit back in nicely after proper installation!

Our LED comes with its own rubber gasket to keep moisture out of the headlight fixture.

Good to know, thanks for the helpful input!

No, the LEDs will not affect your DRLs at all. If the DRLs project from the same bulb as the headlamps, then they will be upgraded to LED as well.

That’s why exactly what I need to know.

With our headlamps there can be a very faint hum when the fans are ignited, but nothing you would be able to hear from inside your vehicle.

Thank you for your interest. We will keep an eye out for a 2015 Odyssey out here in Los Angeles for a video shoot. However, please note, the installation process is virtually identical for all vehicles. I would recommend having a watch on some of our other videos and you will gain a general knowledge of how LEDs are installed.

PrecisionLED thank you, I'll look for some videos if any..

Thanks for this info!

Thank you for your interest. Unfortunately, we do not have an installation video for the DRL. However, the process should be very simple. Removing and installing the LED would be virtually the exact same as your halogen.

Thank you for your interest. The high beam installation would be virtually identical to the lows. The only major difference would be physically locating your halogen bulb. You can find the correct kit here: www.precisionled.com/premium-9005-cree-hl-gl-headlight-led.html

Thank you for the interest. Also, yes, you can absolutely use and LED kit for your highs, and no, it will not affect your DRLs. You can find the proper kit for your highs here: www.precisionled.com/premium-9005-cree-hl-gl-headlight-led.html

Yes, the installation process that is shown in the video is the exact same for the 2017 CR-V.

Thank you for your interest. We purposely used different shades of grey products for the installation. However, this is only the color of the products. The bulb fitments are indeed interchangeable.

PrecisionLED Thanks.

Thank you for your interest. The LED headlights will increase your nighttime driving visibility by 2-3x.

No, you would not be able to, as you would need to have existing halogen fogs in order to convert them to LEDs. Reason being is because you would need already have the wiring installed, as well as a button to turn the fogs on/off.

Yes, the installation for your 2016 will be identical to as shown in the video, and the product is listed in the description.

Yes, the 2015 CR-V would use the H11 kit here: precisionled.com/premium-h11-cree-led-headlights.html

Unfortunately, at the moment we do not advertise turn signal bulbs as they would hyper flash when ignited. We are searching for a simple solution to this. Subscribe for updates!

No, you do not need any additional products in order to bypass your DRL system. The package linked in the description comes with everything you will need to successfully upgrade your high/low beams to LED.

Thank you for the interest. The big difference between bulb types would be the fitment. There is no better/worse when it comes to H11 vs H8. The products are interchangeable because the fitment of the bulbs are virtually identical. Yes, you can use the H11s for your fogs as well, if your fogs list H8 as the required bulb.

Thank you for your interest. Yes, that is exactly correct. Also, the H4 bulb would be bi-xenon, meaning it would project your high and low beams from the same bulb. In order to do so, the bulb would physically move in order to project lights at different angels.

Yes, the 3M tape that is shipped with the kits is very strong.

We do have listed the 2016 CR-V comes with stock LED DRLs, which you cannot replace as they are soldiered to a chip and board.

Hi! The fog lights are definitely still available, and they would be compatible with your 2015 CR-V. Here is a direct link: www.precisionled.com/premium-h8-cree-led-fog-lights.html? I believe you are referring to the ballast, which is a device that regulates voltage and current supplied to the lamp during start and throughout operation. Any LED system that does not require a ballast I would suspect to not be very bright. Let us know if you have any other questions!

@@PrecisionLED Thank you.

There are many factors and many upgrades to headlight housings over the years that help mitigate any glare to oncoming drivers. It is more or less the color of the light which causes distraction and not the actual brightness intensity itself. If you notice, the most distracting lights to see on the road are the blue HID lights which cause a lot of glare for the human eye, whereas you probably never noticed the 6000K or 8000K lights on the road because they are more natural to the human eye.

No, that absolutely does not make sense to us. However, it is possible that your cutoff from your housing is projecting too high. Have you tried adjusting it? It is a very simple process, as there is typically just a screw to twist on the top of the housing.

PrecisionLED thanks for the input, i will try to adjust it

I had to adjust my light angle down to stop the other vehicle flashing I was getting

Same problem here. Owned a 2016 CRV. I tried to turn down H11 lights but my problem is not solved.

Yes, the same kit listed in the description of the video would work for the 2012 CRV EXL navigation AWD.

Yes, here is the correct kit for the CR-V highs: www.precisionled.com/premium-9005-cree-led-headlights.html

Thank you for your interest. Yes, as you can see in the description, the 2012-2014 model would use a different fitment (H4) than the 2015+ (H11), which is shown in the video. However, the installation process is identical. You can find the direct product link for your 2012 in the description.

Yes, everything should fit back in nicely after proper installation!

You should only be able to install the LED bulb in a single direction into your housing. Also, it does not matter where the chip aims, as your housing is designed to project light evenly onto the road.

The installation process shows the main beam (lows). Here is the proper kit: goo.gl/iBdU6u

Both the headlamp and fog lights use the same H11 bulb type. You can find the correct product link in the description box below the video!

We do not sell nor recommend 55W kits because of an increase in fire risk. Our LED kits (35W) run at a lower temperature than your OEM lights (55W). All the horror stories you hear online of headlights melting is due to higher wattage HID or LED kits. They operate at much higher temperatures than what your headlight is designed for. A 35W kit gives 3 time more brightness than a halogen bulb but operates at a lower temperature. The slight increase in brightness offered by a 55W kit is not a good tradeoff for the safety risk.

Thank you for the suggestion. We will keep an eye out for a 2016 Pilot here in Los Angeles, California for an installation video. Feel free to subscribe to our page for updates.

+PrecisionLED thank you and i did subscribe. I love watching the videos. Which kits do you recommend for the 2016 pilot?

I have linked our Honda Pilot LED page below. All of the products listed are compatible with your 2016 Pilot. www.precisionled.com/vehicle/honda-led/pilot-led/pilot-2009-present.html

Thank you

Thank you for watching!

We appreciate the words of advice and thanks for tuning in!

Thank you for your interest. I have linked the proper kits for your 2014 CR-V below for your convenience. Headlights high/low beam: bit.ly/2aHi5wx Fog Lights*: bit.ly/296jCPO

We will keep an eye out for a 2018 CR-V for an updated video. However, the installation process should be identical to as shown in this 2012 - 2016 video.

We do have offices in LA that you are able to pickup your products from by scheduling an appointment. However, we are an e-commerce business, and do not have any store fronts.

Thank you for your interest. You can find a direct product link in the description of the video. For now, the link has been disabled as we are on backorder for the H11 product. However, the link should work sometime in the next couple days, as this is when we expect our replenishment of inventory.

PrecisionLED so would you need two kits to cover both the headlights and fog lights? Since the links show the same H11 kit which I assume only comes with 2 bulbs?

Yes, you would need 2 kits for the lows and fogs. Both links direct to the same H11 kit, because you would install the same type of kit for both the lows and fogs. The H11 bulb is compatible with both lights.

The high beam installation would be identical to the lows, except you would just be installing on the high beam portion of the housing. You would want to install this kit here: www.precisionled.com/premium-9005-cree-led-headlights.html

No, the product is designed for CR-V owners that want to upgrade from halogen to LED. If your vehicle comes with stock HIDs or LEDs, then the product is not compatible.

Thank you for your interest. There are direct links to the packages for the headlamps and fog lights in the description of the video. We do mainly handle interior LED lighting, however, we also sell headlamps, fog lights, high beams, reverse, and a couple other exterior lighting. Also, your vehicle should indeed us the H11 bulb type. Unless, of course, your vehicle comes with stock HIDs, in which case, the kit listed would not be compatible for your vehicle. For further inquires, feel free to contact us directly at help@precisionled.com.

You can find all of the products here: Lowbeam: goo.gl/iBdU6u Fog Lights*: goo.gl/iBdU6u *H8 & H11 LEDs are interchangeable Please feel free to reach out at help@precisionled.com if you have any questions!

@@PrecisionLED perfect, thank you

Thank you for the suggestion. We will keep an eye our for a 2007 Accord out here in Los Angeles for a video shoot. However, please note, the installation process would be virtually identical to as shown in this video.

Yes, we do have listed that the installation process, as well as the product link in the description is compatible with your 2012 CR-V.

You can find the h8 fog lights here: Fog Lights*: www.precisionled.com/premium-h8-cree-led-fog-lights.html Hope that helps!

Both LEDs and HIDs do indeed have their own perks. Either can be brighter, depending on the quality of product purchased. We believe we have some of the highest quality products on the market today, which we back with a warranty. Also, LEDs are known to last slightly longer than LEDs. I have linked some additional information below for your convenience. www.caradvice.com.au/278125/headlights-explained-halogen-v-hid-v-led-v-laser/

+PrecisionLED sweet thanks for the quick reply! I think I will be switching to leds, they would be much better for me as I live on countryside roads where their isn't as much light

PrecisionLED wait so if LEDs last longer than LEDs, then would you recommend perhaps using LEDs? Haha :D

The ballast on the driver side would go on the sidewall as well. There should be an identical spot on the opposite side of the vehicle.

PrecisionLED so i need to remove the battery? Thanks

No, it is not typically necessary. However, if you are having trouble accessing the side wall, there should be plenty of places to mount the ballast. You would just want to find somewhere that is flat. Be sure to clean off any surface beforehand to free it from any dirt or dust.

Yes, we do carry the DRL LED for your 2007 Accord, which you can find here: www.precisionled.com/premium-9005-21-smd-5730-led.html Please note, you would have to up the quantity to 2.

Thank you for your interest. We will keep this in mind for future installation videos. However, please note, it is very rare for us to have to adjust the headlamp cutoff after the LED installation.

PrecisionLED my main question is, does the LED have a crisp cutoff like true factory HIDs?

A headlamp cutoff has to do with the housing type (reflector vs projector), and not the bulb inside. Projectors have a physical medal plate inside of the housing to make a crisp cutoff. This is with LEDs, halogens, HIDs, or any other type of light installed. Reflector housings tend to disperse light on the road more.

Yes, this is perfectly fine. Our kits (35W) run at a lower temperature than your OEM lights (55W). We do not sell nor recommend 55W kits because of an increase in fire risk. All the horror stories you hear online of headlights melting is due to higher wattage HID or LED kits. They operate at much higher temperatures than what your headlight is designed for. A 35W kit gives 3 time more brightness than a halogen bulb but operates at a lower temperature. The slight increase in brightness offered by a 55W kit is not a good tradeoff for the safety risk.

We are not sure exactly. However, if you are looking to shop around, you can also contact any auto or audio shop.

Would it be okay in stock housings,like it wouldn't blind other drivers,and you don't have to worry about fuses and Texas Inspection right.

Yes, they are absolutely safe to drive on the highway. As a matter of fact, they will increase your nighttime driving visibility by 2-3 times, so I would say they are much safer to use for nighttime driving visibility.

Thank you for your interest. The installation process for the 2017 CR-V would be identical to as shown in the video.

Here is a link to the bulbs you would need to upgrade to LED: www.precisionled.com/premium-h4-h-l-cree-led-headlights.html They would be 2-3x brighter than your stock lights.

Thank you for your interest. The installation on the 2017 should be virtually identical to as shown in this video. Installing LEDs on headlamps is very similar on all vehicles. The only major difference would be physically accessing your halogen bulb.

I have the 2017 now and transferred the bulbs from my 2016...the installation is identical. The only catch is in the 2017 cargo area they did away with the central light and opted for two lights on either side, so I just left those alone.

Mike, I changed the interior lights on my 2017 and they looks great, even did the ones in the cargo area. Very fast and quick install. Now I just need to change my headlights and my reverse light. I saw that on the back of the lift gate, there are two square cut outs for the reverse light. I just need to be careful on how I remove those pieces, to get to those reverse lights.

To me the interior ones were more important to do, someday I might tackle things like the headlights and the backup lights, but not anytime soon. :)

doesnt the new CRV come with awesome leds stock??

Yes, we do carry an H4 kit, which you can find here: www.precisionled.com/premium-h4-cree-hl-gl-headlight-led.html