Do you like this unedited content? Let me know below. I think this is an easy way to hang doors, and make them perfect all the time

It’s great! My shed has been completed and it turned out nice looking and sturdy and it is way better than the sheds that many of my neighbors had put up. Of course, I'm pleased with the outcome and this Ryan’s kzfaq.infoUgkxGZedDTcDfgD7fG_uU4esfx_EgxzlY2_1 Plans was extremely useful to me as a guide.

I like the unedited format for relatively quick jobs like this because it lets the viewer see whatever mistakes you might make and how a pro would go about fixing them easily. Even if you don’t make all the possible mistakes for a job in your video, I think it’s helpful to a weekend warrior’s mindset when you’re pretty non-chalant about the ones you do make. Keep it up

Very bold to do work with no edits. I actually learned a new trick. Cheers!

I am old enough to be your father and have been a DIY’er for 50 years. Thank you for the tip with the blocks, it will save me from many headaches in the future. Old dogs, new tricks 👍.

Unedited content is where it’s at! I do handyman work and love seeing how people work thru the hiccups and challenges that come with remodels and installs. Thanks for your content…. I’ve learned tons of tips from you and Greg!

Pro tip from an old time carpenter. use your shims to level the hinge side of the door jamb prior to installing. that way you have a perfect side to measure/level/plumb from.

Loved this format Kyle @rrbuildings ! Something that I don't believe you mentioned that is extremely important and always my first step when hanging doors - Check the floor for level before you set any jambs!! If it's out, adjust for the out of level by cutting the leg of the jamb that's high. I'm sure you do this but I don't think you mentioned this. Great content as always!

All your videos are awesome and I love the fact your so transparent in the work you do and don’t sugarcoat anything, keep up the great work….hello Greg

This format of video for this content definitely makes sense. Will be coming back to this video when I'm installing my doors!

Unedited definitely!! Whether u are a professional or a DYIer seeing the real raw unedited process is 1000 times more helpful and appealing!!

best door hanging video on youtube. wish i found this years ago!

I've been installing doors for a long time and never thought about putting the blocks on the sheetrock to hold the door in place. Glad I watched this and learned a new technique to improve efficiency. Keep up the good work!

I liked the tip for the blocks that keep it in place before starting to plum it. Please keep that type of videos coming!

Absolutely top notch! T. O. House did one where the floor was 1" off, not common but useful. Your video is pretty much what I will face. Again Great Job!

A buddy and I just spent wayyyy too much time installing a prehung door. We should have watched this first. Thanks for thinking about people like us and providing this info. I need to do one at my own house soon and I'm going to do it by myself since I have confidence now!

Really enjoy seeing all the little tricks that go in to making things look perfect. Thanks Kyle & Greg.

I like this unedited format showing everything, mistakes and all! Great material. Thanks for showing your approach.

Unedited is the way to go. Make sure to put that on your titles again. That’s why I clicked and why I hung around. Great video. Mistakes make it so much more relatable. Keep it up!

Always appreciate ALL your content. Don’t let any haters get to you. Blessings!

When the framer does a good job, it makes hanging the doors that much easier. Who did your framing, anyway? Oh, it was you! Your customers are getting quality work. It shows in every detail.

LOL...ok, editor trolling us with the "un-edited, 100%.... *JUMPCUT* ...door install" clip at the beginning. I had a good laugh at that TY for the humor 😛

This guy is a master with every detail.very impressive. He earns his money he CARES about what he is doing!

Man, that was super efficient. I've been doing this for a long time old school way. That Lazer is the cats meow. Thanks for your help. 👍🏼👍🏼

The unedited format is great. Was a good tutorial for someone like me who isn't in the trades but works on their house and installs doors, windows, does a bit of framing. Thanks

Thanks for the unedited video. Another reason why I like your work.

Awesome video. Learned a new trick with the shim between the door and jamb on the strike side when checking the reveal. Thanks!

Thanks for the tips, Kyle! I think I watched through this video at least 3 times while hanging 5 doors in my basement project. The stop blocks and the laser were a huge help. The only thing I had to work out for myself is checking if the framing isn't plumb in/out rather than left/right. So I did have to break out the level for that part rather than relying solely on the laser. I blame that on my framers though!

I LOVE unedited content because you really learn and the teaching skills are clean and true. Ive seen a lot of ways to hang a door but this method is more akin to what I would do or would like to do Thanks for the new direction . Also like the fact that you got right into hanging it with not a lot of prep work it literally took you the time it took to record this video like 12 min awesome!

This video and the one you did recently on trimming out a window have given me great ideas and motivation!

Went from knocking fools out in the ring to installing prehung Doors like a BOSS! Puro Canelo Alvarez! AL PURO CIENON NO CAP ✊👊🤜🤛💪🥊💯🔥

Great video. As someone who doesn’t do this for a living it’s a great video to learn from

Awesome!!! The timing on this is insane... I am about to hang 5x Pre Hung Doors for the first time in a reno. Learned a few little tips. Thanks from Au!

Great video very informative also I appreciate the realness of it as well tbh this is how i learn when its real time, unedited, and all honesty. Im sure other would agree to this as well please keep up the great work Kyle and for sharing all the knowledge you have with us, it is truly inspiring to see and helps me to understand and learn more!!

Always happy to learn new tricks of the trade. Perfectly plumb (perfectly level?). I taught a young man that term once - afterwards he would go around saying; "it's so plumb it's cherry". My kind of humor.

I liked the unedited content. It gave me an idea of the possible things a person might run into when doing the install. Thanks!

Great Video Kyle. It was great because it shows real world without edits. People need to have an understanding what it really takes to install doors. I was always taught never to put shims behind hinges.

Love the unedited versions, thank you

Love it. We are just in the pre planning stages of our home build. Should be breaking ground next spring.

Thanks for sharing, great tips for us solo home workers!

After 35 years of trimming, I thought I would be able to add some little trick for you, but you covered it perfectly, short of buying an expensive door install jig and dang it, I still forget to take those shipping dongles out more often than not LOL. On a side note, I check the door stops at this time as well, just in case the bottoms aren't parallel to each other. 👍✌brother

Damn…that was quick and efficient!! Loved the idea with the blocks! Brilliant!

Yes simple and quick. Yes enjoy unedited

The unedited is great!

This was amazing I struggled doing this alone during my first floor reno, now I’m upstairs, fallowed this video and it was easy. Thank you buddy.

I can't even find all my tools in the time it took you to hang that door. I'm banking it's going to take me most of tomorrow to put my door in. Fun.

The ole plug stuck in the jamb trick. Great video and good tips. I am going to use the block tips! Thanks

I like the unedited stuff.

Yup! Really enjoyed this. Would be great to have a series like this for one topic at a time. 🎉

Perfect way to install a door, I have 5 to install tonight. should go good!

Dude, you and your man Greg are a force to be reckoned with. Love the videos always pick up some detail to reinforce my own arsenal. Keep on keeping on!

the best I have seen as of now, good job, he didnt mention the the hinge screws he replace were longer that the original screw, which makes the install sturdier, good job

Excellent video! A great lesson for Greg !

Damn, the pros make it look so easy... I recently finished my first ground up post frame building (12 x 22 foot shop) and it has one door. That darn thing took me more than an hour to install. This took Kyle 10 minutes ;/ Awesome advice and great tips!

Too bad I did not see this video ten or more years ago. Great information. Thank you!

Best pre-hung door install video I've seen. Keeps it simple and quick-I like the use of the laser. I'm doing a basement finish, and my carpenter is too busy so I"ll be doing doors myself. I would love to also see tricks for trimming the jambs for uneven floors.

awesome content very useful. Finishing my basement and was hesitant on door installs. Thank you

Just the demo I needed!

You definitely are a great teacher bigman appreciate you

Great video! Showing how it's done in real time is very helpful. And good job on the camera, Greg!

I like the block trick, will definitely try that out next time. Thanks!

Great method, definitely going to use this next time!

Yes, you hit the nail on the head when you said "we did the door jamb openings" so we know they are plumb and square. That's exactly why you want to build that way starting all the way back down to the foundation, square, level etc. It makes every step easier and less time consuming as the build continues to the next part of construction. Had those door jambs been out of square, life installing this prehung would have been more involved and the video twice as long, no doubt at all. My observation with prehung doors or not is shimming enough locations so the jambs are solid with the framing as I have seen several builds where the door jambs shake and move as the door swings open or closed, especially when its being closed. Great point of view, thanks Kyle/Greg.

always fun watching you, ima tool nutter also, if there’s a tool for that, i want it. one thing we ALSO do is ask what flooring is going in and if possible ask for a sample of it. then we use that to shim all the door jambs up for the perfect look. and YES the unedited version is a good one bc it shows us what mistakes or small issues we can expect. THANKS!

Brilliant, thanks Kyle.

i liked the stops idea. but like you said at the end. your walls are straight. but the stops will help me in the future.

What a beautifully done kzfaq.infoUgkxYGamVaHfdHiPlAQaLa7zkwR02OKpGYDU ! The instructions and the photographs are brilliant. It is thorough and genuinely informative. Ryan got another winner! No one does it better!

Nice way to install…. I started using trim screws because I didn’t want to buy a new 15 gauge nailer. Using your method with the couple nails and then shimming to your line worked great. Not sure why I hadn’t thought to do it that way. I’ve been holding shims while putting in a screw, checking for plumb, adjusting, etc. I will now just put in a few screws and loosen/tighten to laser line… go back and fill in with shims. Thanks for all your videos… you guys do great work 👍

Love the un edited video. Nice method of installation im gonna give it a go.

You always make everything look so easy and I know that some of the time it isn't!

Very good class of how to hang a door, Thank you very much for taking your time.

Great technique. I started using the block method a few years ago and wouldn't do it any other way. I also like the use of the laser and not having to fumble around with a level, I'll just have to buy a laser now.

I found this helpful thanks for demonstrating how to solo hang a door

12 min. to do a door install is good to me. That laser level is nice!

Thanks for sharing! Very helpful! 👌

Great method when the RO is sound like you said. More than half the times it’s installing a door into an old opening many times the doors, not the same thickness as the wall for whatever reasons but that surely is a nice KISS method.

Good tips. I would not have thought of adding the blocks to the outside.

Good video and work, and good job on Greg’s part.

It helped me! Thanks for sharing, the unedited is good for me!

That is an interesting and great way to install a door. I will have to try that method. Thanks for sharing!

Good. Straightforward. Thanks

That was great when u forgot that , what a call “oh wait a minute” plug! They are useful but I constantly forget to take them out! Also what a great job on your rough door frames Kyle (&Greg) ! I constantly fight what I call “just get it done framers” who give me 2.5 or some 3.5” over frames! Oh also I like your method I use Ply squares 8th, 1/4”, 3/8”, 1/2” , 3/4”, all @ 3.5” squares & those are my shims for the most part? Some shims I make at 8” long & 2” wide out of cedar post I buy and run on my shim jig and big cabinet saw in my converted shop/ garage for my finish contractor little business !

Your video is very helpful...Thank you. Your very gifted.

Brilliant video. Thanks for the help!

I cant wait to show all the old heads at work the block trick! 10 outta 10 my friend, great video!

Helpful content, thank you.

Thanks Greg, Great job 👍

Helpful. Thank you!

Thanks for this!

Very helpful. Great content.

Very helpful, thanks!

I’ve been hanging full jambs with blocks like that for 30 + years. I have lasers but I can still hang a door faster with my Stabila. One recommendation. Set your door up on blocks to allow for your finished flooring. That way you don’t have to cut down your jambs later. 1/2” for carpet etc. Good video for those just getting started though.

Great job Greg!

You’re killing me with that 15 degree. 😂😂😂😂

Excelente y muy hermoso trabajo felicidades 👊

Great tips. I like the unedited tips and tricks

Great information. Thanks for sharing

Absolute Perfection

Very good. I enjoyed it very much.

Great demo, Kyle. Good work behind the camera, Greg.