Thank you again sir for your time and resources going into this radio. You made the process easy and effortless. I know this will not be the last time you will be doing a radio for me. Talk to you soon. 73
@GroundControl2042 жыл бұрын
Hey Jack, thank you for your business sir. It was a pleasure working on this radio, get ready for some decent skip rolling in this spring bro. 73
@stonefacedgrasshopper22002 жыл бұрын
Welcome to the airwaves. Started driving and chatterbox chatting full time at 22yrs old. Now retired in my late 60's. You picked a great radio and an awesome tech. 73. 😑🦗
@Channel-xb4xt8 ай бұрын
Thanks for the tutorial! Per the schematic, the addition of a 1k resistor forms a voltage divider with a 10kΩ resistor connected to the 5v regulator. Without the jumper (resistor), the radio sees a logic high at 5v via that 10k resistor. With the 1k resistor in place, the resistor drops the voltage at that point to 0.45v for logic low. If the total resistance is 11kΩ, the total current is 5v / 11kΩ = 0.4545mA. Since there is only 1/11 of that 5v (0.4545v) appearing across the 1k resistor, the power dissipated in it is 0.4545v x 0.0004545A = 0.2mW. So a 1w resistor is a bit extreme... If they thought the average CB'er (who these are really marketed toward) could work with SMDs, those through hole part vias wouldn't even be there since it is just a CMOS logic level signal.
@highwaylover389 Жыл бұрын
Man thanks for posting this level of detailed info. I just bought a Lincoln 2+ with the cb mod. Your channel just popped up the day I'm about to instal in my truck and man you really dropped some bombs on me. This is my first big radio and you really explain the ins and outs of the radio.
@GroundControl204 Жыл бұрын
Well thanks a lot for tuning in sir, you have yourself one fine radio, a solid performer. 73👋🏻
@RaganEugene Жыл бұрын
Just found your show. Loved it! Thanks!
@GroundControl204 Жыл бұрын
Thanks for tuning in sir. 73👋🏻
@MarvinParnell2 жыл бұрын
I have this radio and Did the conversion but other than that it is stock. This radio is great, I've made tons of contacts both on CB and 10 Meter. Great radio, President is knocking them out of the park with quality stuff. Great video Thx.
@coreyhopkins89942 жыл бұрын
How hard is it to switch back and forth between 10 and 11 meter
@WJ6FRadio2 жыл бұрын
Outstanding video! Dig the handles. I have those on my FT-891, FT-991A and IC-7300. As for the CB world looking at picking up a RCI-2970N3. Keep making these outstanding videos!
@tropical41able7 ай бұрын
Hats off.Best video on the web.Thanks.
@GroundControl2047 ай бұрын
Thank you sir, that’s an awesome compliment. 73 👋🏻
@Meattrapper2 жыл бұрын
Excellent video - I am new to CB and this is a great video. Thank you for being clear, concise and educational.
@GroundControl2042 жыл бұрын
Thank you sir. 73
@Adkinstruckingandlife Жыл бұрын
Just came across your video when I was looking up a cb with Ham to put in my semi and really just learning bout all these different radios and trying to find the right one. Anyways loved this video so I had to subscribe
@GroundControl204 Жыл бұрын
Thanks a lot for tuning in and subbing. 73👋🏻
@Tinman386wisconsin2 жыл бұрын
Welcome to the hobby jack! 386 Tinman wavin. Yeah sifting thru the bs is very tough when your new.
@stevenreid7165 Жыл бұрын
I love that radio
@howardsansome35602 жыл бұрын
Welcome to the hobby...73' from Whiskey November 115, maybe catch you on the airways sometime.
@travischapin8862 жыл бұрын
You said "Hold onto Something.". I caught that.
@generalingwer43412 жыл бұрын
Welcome to the air jack.enjoy this channel.thanks for your content.just got one of these myself.im subscribed.
@attilassimcorner52772 жыл бұрын
Hey Ground Control 204 is great video, looks great and thank you for this informative video.
@bobrand9814 Жыл бұрын
When someone says your peaks -- negative AND positive -- are gorgeous, you can't help but feel the love..
@GroundControl204 Жыл бұрын
73 👋🏻
@ericphilson11192 жыл бұрын
I've been watching you vids, and want you to be the guy to work on my stuff. I have a farm operation and need several units operating. I'd like make contact to explain my needs. I have my first Lincoln 2+, and want to set up at least one more, plus some units with amps to put on tractors. How can I get in contact to discuss my needs?
@PhoenixRising2512 жыл бұрын
As usual, another great and informative video Mike. 👏👏👏 To the young man that this video was made for, I have a word for you... Be thankful that you're informed with this kind of honest tech work so early into this hobby. Stick with 204 and others like him and you'll save yourself tons of cash, frustration and confusion. I got my first CB radio 37 years ago and dealt with different so-called techs over the years and in honestly only two of them truly knew their stuff. Unfortunately they've both passed away. This channel keeps things on topic and honest. Mike I know you'll read this post eventually and I have a small request. I'm sure there are other radio-heads other than myself that would like to see a video about radio reception. Like, which radio do you think has the best receive (new or old) and should a receive section of a radio ever be tweaked. I was really spoiled by a couple of my old Cobra 2000's years ago by having such a low noise floor with hardly any white noise. You get the idea. Sorry for such a long post, keep the vids coming. Peace and 73 from 251! 🤙
@Michael-mj8ix2 жыл бұрын
Welcome to the C.B. Waven from Southern California
@YoYo_8182 жыл бұрын
Wow! I have been using a stock President Lincoln II+ for a few months now and would love to send it in to you some time.
@GroundControl2042 жыл бұрын
Groundcontrol204@icloud.com
@jodicastle32472 жыл бұрын
Awesome video mike
@Warlock4852 жыл бұрын
nice piece of equip u got on top lolol
@GroundControl2042 жыл бұрын
Thanks, a good guy traded me that. 73 lol
@huletbaker33622 жыл бұрын
Another great vid. I've noticed you use a Ranger SRA-198 when testing. Is that your choice of handheld mics? I have one myself.
@GroundControl2042 жыл бұрын
Yes sir, best handheld mic on the market Sra-198. 73
@djweaver301252 жыл бұрын
@@GroundControl204 how did you get it to work with the Lincoln? I can only find 4 pin versions?
@newkey11067 ай бұрын
New comer just starting just retired getting my ham and radio’s soon
@GroundControl2047 ай бұрын
Welcome to the hobby sir, and also congratulations on your retirement. 👋🏻
@bigshowradio_5502 жыл бұрын
Nice! Mic question: I have not seen a video of anyone using a desk mic on an Anytone, Lincoln, or Stryker. Thinking of getting a lincoln and using as a base. Will a Turner desk mic work on this?
@aaroncunningham53812 жыл бұрын
He started out Radio with a damned good unit. I love mine and 204 did my setup up right. I get good AM results and SSB contacts. Welcome to the real CB world and get ready to spend money. I still look at and buy them. Good job, brother.
@djweaver301252 жыл бұрын
This maybe a stupid question. Can you use FM on the 11m band after the conversion?
@GroundControl2042 жыл бұрын
Definitely not a stupid question brother, but when you convert these radios you only gain the 11 meter band, you lose no bands and no modes sir. AM/ FM/ SSB is all active.👍🏻
@mines513 Жыл бұрын
awesome video sir
@GroundControl204 Жыл бұрын
Thanks John, I appreciate your time and comment. 73👋🏻
@CodyTheBear_2 жыл бұрын
I'm in the UK and ours comes with a white wire, that you have to snip. I also own one of these radios
@utubeCENSORSaregai Жыл бұрын
If you hit the DOWN arrow cbpasswd is only one click ✌🏻
@KE8ODY-WV-Ares-Ham-Dad-3O411 ай бұрын
Is that smaller than a stryker 447 hpc? I just bought a Lincoln for a mobile hope she fits
@GroundControl20411 ай бұрын
Probably around the same dimension’s or exactly the same. The term for them are called “Din sized” radios. 73👋🏻
@DeltaSierra181 Жыл бұрын
What sort of stackable stand is that holding your O-scope?
@GroundControl204 Жыл бұрын
It’s made of Black tempered glass and the shelves are adjustable as well. Here’s the link👇🏻 www.ebay.com/itm/124352541100?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=8bZP1fjkSaa&sssrc=2349624&ssuid=yjbo8mqdtp6&var=&widget_ver=artemis&media=COPY
@DeltaSierra181 Жыл бұрын
@@GroundControl204 Thanks!
@martybennett9876 Жыл бұрын
I have a president Richard from Zane Johnson I like those handle 's
@user-vb4vx4ib7p8 ай бұрын
Hi
@GroundControl2048 ай бұрын
73 👋🏻
@2WR467 Жыл бұрын
Quick question. How do you connect radio to oscope?
@GroundControl204 Жыл бұрын
With an RF sampler, one rated for wattage that can handle whatever amount suits your needs, do not hook up a radio directly to an oscilloscope or you will damage the test equipment. 73
@2WR467 Жыл бұрын
@@GroundControl204 thanx 👍🏽
@bondo93802 жыл бұрын
How can I get in touch with you about my president lincoln 2 plus? I don't have Facebook.
@GroundControl2042 жыл бұрын
Groundcontrol204@icloud.com
@bondo93802 жыл бұрын
@@GroundControl204 I need the out the door price for the president lincoln 2 plus with your tuning done. Thanks
@GroundControl2042 жыл бұрын
@@bondo9380 Everything is discussed in email sir.
@jasonbabila60062 жыл бұрын
I have an old 80’s era President Lincoln that still works but I have been thinking about replacing it with the Lincoln II+ or another brand, if I do decide to get the Lincoln II+ would you be able to tune and align it?
@GroundControl2042 жыл бұрын
Of course! It all starts with an email sir. Groundcontrol204@icloud.com
@jasonbabila60062 жыл бұрын
@@GroundControl204 Thank you. 🤜🏽🤛🏽
@DJTempest100 Жыл бұрын
I have 2 of these radios one converted one unconverted I like them I'm not impressed with the echo on it you can't dial it in to your liking without going through all these steps but other then that its a OK radio
@Filipcarmin2 жыл бұрын
Hy Sir, Lincoln 2+ or CRTSS9900???????
@GroundControl2042 жыл бұрын
Lincoln 2+ will out talk that 9900 any day. 73
@sargemarine37092 жыл бұрын
Want too send you 2 of these. Sent you an E-Mail Alabama Watchman (Sarge Marine) FB.
@GroundControl2042 жыл бұрын
As long as they are fully functional I’ll be glad to take on the job. All “repair specific” radios are referred to Theradiogarage.com for future reference
@vladimirlavrisiuk5112 жыл бұрын
Once you make this CB Conversion, do you retain the 10 meter band?
@GroundControl2042 жыл бұрын
You will not lose the 10 meter band at all sir
@Curtis-cp2gr Жыл бұрын
Thank you for asking that question I am looking for 10 meter rig that used on 11meter too
@tonyhook86564 ай бұрын
Is there any reason I couldn’t put that resistor on a micro switch to be able to easily put it back to 10m ?
@GroundControl2044 ай бұрын
Unnecessary work because you don’t lose 10 meters after the conversion.
@tonyhook86564 ай бұрын
@@GroundControl204 ah ha. Perfect. Thanks for clarifying. That’s ideal. I’ll be using 11m now and 10m later. Awesome. Subbed. Thanks again bro.
@gusdabringhaus2607 Жыл бұрын
How to become a new customer? Thanks
@GroundControl204 Жыл бұрын
Everything starts with an email sir. Groundcontrol204@icloud.com
@bobdillashaw43602 жыл бұрын
I’m trying to decide between the Lincoln 2 plus or the anytone 6666, any suggestions??
@GroundControl2042 жыл бұрын
I don’t like the anytones what so ever, quality control is just not there. 73
@sjfk13062 жыл бұрын
So quick question, looking at this or the AT6666. Using a Stryker A10 antenna for CB in a semi. What would you recommend?
@GroundControl2042 жыл бұрын
I’m not a fan of the anytone what so ever, Lincoln 2+ is a better radio. But my #1 recommendation is still the Stryker 955.
@sjfk13062 жыл бұрын
@@GroundControl204 I have a 955. I hooked it up and it blew the fuse. Replaced the fuse and won’t turn on. Before this it say in a upstairs bedroom so I need to get it repaired. Something you’d do? I’d actually wanna sell it as I’ll be done trucking in October.
@GroundControl2042 жыл бұрын
It’s called reversed polarity, hooking up the power cable backwards will blow a diode easy. You will blow the fuse on the power cord as well and it will not power back up until the DC protection diode is replaced and the fuse as well. I stopped the repair service 5 years ago, you can send it to me but if there is more damage than what I expect in my previous statement I’ll just send it back to you, I’m so busy with fully functional radios that need tuning and customizing I literally have no time for true repair troubleshooting, which can take days or even weeks depending on the damage. Groundcontrol204@icloud.com
@sjfk13062 жыл бұрын
@@GroundControl204 it 100% wasn’t hooked up backwards. I’ve been trying to get to Walcott to drop it off but you seem to know your shit and I just listen to your vids podcast style while I drive. Lol. I’ll think about it. I don’t want to take your time away from production. Thank you.
@simonclarke2198 Жыл бұрын
Hi the handles can you get them in uk or is it just usa
@GroundControl204 Жыл бұрын
The seller is on eBay, just search cb radio rack handles. I’m sorry I can’t find the link to share with you. 73