Using Different Automation Modes in Studio One

Using Different Automation Modes in Studio One | PreSonus

Рет қаралды 7,650

Ай бұрын

In the age of digital audio, automation has been crucial for getting audio to sit well in the mix. It can also be used to bring life, dimension, and movement to your tracks.
Did you know that there's different recording modes for Automation in Studio One? In this tutorial, PreSonus software specialist Gregor Beyerle explains the difference in "read," "write," and "latch" automation modes to help you automate elements of your next mix!
_____________
Learn more about Studio One:
bit.ly/3z69lLz
Get more creative tools with Studio One+ now:
bit.ly/StudioOnePlus
Watch more tutorials from Gregor: • Studio One with Gregor
Watch the Studio One Minute:
• Studio One Minute: How...
Using Different Automation Modes in Studio One | PreSonus
#presonus #StudioOne #S1withGregor #GregorBeyerle #mixing #audioproduction #musicproduction

Пікірлер: 29

@ugurcanorcun807 Ай бұрын

I’m a power Reaper user for 15 years, built my career around it. Yet you are this close to convert me into Studio One since you’re bringing best features of every DAW out there without creating confusion. Great work!

@cesmcmyth 26 күн бұрын

Gregor is Also keeping me using S1 every time more and more... And Joe of course too, but I have watched more from Gregor IDW. Enjoy

@Aniss_Chekikene Ай бұрын

The way automation works in Studio One was one of the reasons I made the switch to it. It just makes the work flow much better than anything else I have used

@bcole23 Ай бұрын

That was useful. Thanks Gregor! ❤

@bonniecorralmusic 25 күн бұрын

Thanks for this fun video! Excited to practice this

@DrPhil3297 Ай бұрын

Super helpful. TOUCH all the way from here out. Thanks Gregor!

@JotaikaBopsAta Ай бұрын

Thanks, I didn't know the difference between these modes

@ELLIOT8209 Ай бұрын

Will PreSonus ever make an internal LFO to map to various parameters on various presonus synths?

@frankwalders Ай бұрын

Yes yes yes, please Presonus!

@olleyollet Ай бұрын

the real flex here is that you can have a high latency plugin chain and the automation is still on point

@kirkevans906 Ай бұрын

Thank you! I've been using read ever since I got Studio One, and avoided the others because I didn't quite understand them. You cleared it up! Touch all the way starting today.

@n0bf 28 күн бұрын

Your instructions worked perfectly after I changed the ATOM SQ touch strip settings to allow filter cutoff control. Thank you!

@ISHQK-kx5ze 29 күн бұрын

I love you studio one 😂 because it's my favourite Daw .

@jamminjay317 Ай бұрын

Cool Stuff. Thanks!🙂

@UDun8 Ай бұрын

Why is this behaviour not available in the midi CC lanes ?

@matrixmedia381 29 күн бұрын

Hi great video....is there a way to use glide in poly mode in Presence...or... program bend/glide into the sound patch? I would like for my roads patch to bend/glide up automatically Please help figure this out

@DarrinNoNAME Ай бұрын

Thanks for the explanation. Even though I know about these modes, it's definitely helpful for many others. The one question I do have however, is once you assign the parameter to a control (let's say the touch strip like this example) once you're done, Is there a way to un-assign the touch strip from the parameter to be used for something else or is it always assigned to whatever parameter you assigned it to from the start? Does my question make sense?

@Take-the-Ticket Ай бұрын

It goes by instrument. If you switch to a different instrument, that touch strip will control something else on the new instrument, if that is what you mean. To untether that knob or touch strip form the same parameter on the first instrument, you could unclick the little triangle you used to tether the knob in the first place. So you could use just one knob to control any number of automations on the same instrument. It is the little triangle that "points" left, in the vid it is at 02:13.

@DarrinNoNAME 26 күн бұрын

@@Take-the-Ticket Yooo.. Thanks for that tit bit. That makes sense. I think that's what I'd need to do. Appreciate your reply. Thanks again.

@rajivmodha3693 29 күн бұрын

One can also draw automation too, right?

@kahuna20001 Ай бұрын

Am I right that automation curves don't work in show page? I had my hopes for this ability when I was checking out Studio One a few months ago and decided to forego buying it because of this.

@TarasKuznetsovMusic Ай бұрын

Damn I used Write and Read for all my volume automations all the time... Didn't have time to get to know "Touch and Latch" options... Ok so now it's easy with Touch mode. Can you please stop making me feel stupid all the time I'm using SO? ahahah (Joking) Really you do amazing job guys!

@matthewthemartian Ай бұрын

Hi, I just looked at your channel and I am curious why you quit making tutorials for studio one? I watch a lot of these and your ideas are actually very unique to the normal tutorials. I am going to watch the few you have now but just judging off of the one I started (On the hard drive crashing) it looks like they will be very useful and full of good information.

@TarasKuznetsovMusic Ай бұрын

@@matthewthemartian oh man… I’ll get to it soon! I am very grateful to you for the feedback and I’m really happy someone found those helpful!

@matthewthemartian Ай бұрын

Yeah good tutorials and tips/tricks are hard to find in the first place ESPECIALLY for Studio One. Not sure if maybe life got in the way (as it does) or if maybe you got discouraged from making videos for some reason ..but I assure you that from what I seen on your channel you have some great knowledge you could be sharing with the world. Knowledge that could really help people out. So ima go subscribe to your channel and hopefully I will see some more videos from you come out one day. God Bless you and hope you have a great night.

@briancollins1475 Ай бұрын

I'm afraid this left me confused as to when to use track automation (as here) or part automation. I went and re-watched Gregor's kzfaq.info/get/bejne/qdCpeb11p7OvZ3k.html and that made me think that I would have chosen part automation here.

@Kodablumusic Ай бұрын

First comment LETS GOOOO

@Kodablumusic Ай бұрын

I should get free gear or a free vst for being so supportive

@matthewthemartian Ай бұрын

Nope only when you have been the first comment 100 times and proved your unwavering loyalty. Until then its just free tips and tricks lol 😁 *If you somehow get first comment 100 times and don't get free gear or VSTs then forget I ever said this lol