nice recycling, just one question: why separate the cans to mix them after grinding?

Courage to transport dirty cans in the Audi RS6 hahahahhahahah

In Michigan in the United States, there are recycling machines in nearly every grocery store. When I worked at one of my local stores, I had the task of emptying out the hopper when it got too full. You get a little bit of money for each can returned. So when I read the title of this video, I instinctively thought to myself “Oh cool. He got $300.”

Dumps all cans on ground, picks them up with a mini front loader, then proceeds to pick them all up again by hand. 👏🏼

Сначало отсортировал банки, потом перемолол и свалил в одну кучу. Гениально! Я просто похлопаю👏

Nice RS6

Awesome! Was not expecting the factory forge. I thought it would be like you're old videos with you big home forge. I was confused on why you were loading everything back into the car.

I dont have the money to afford one of those industrial shredders, so i took it another route. I reversed engineered a micro shredder to use for those cans. Truly works great, the trick is that the teeth arent as big for obvious reasons, and so i gotta maintain some pressure on the cans so they dont just keep squirming around, which is only an issue when the pile gets low.

The whole time I was thinking, “cut soda cans are so sharp, I’m glad he wore gloves.” Man this was cool! I wish I had the cool tools to play around with.

The shredding machines you have are impressive. I think the breakage (and all the dross) shows why people say cans are a bad source for casting aluminum.

bulgaria liscence plate; AUDI car, drives only on left lane - this man has learned some important lessons in Germany

This guys still in the red after spending 25k on those machines

Hey Ben!! Welcome back.. That was a great video! Wish it was longer and heard your voice again.. Don’t give up on us 😄🍻👍

This was a very cool different style of video, well done!👏🔥

Turning trash into treasure, so inspiring! 💪🌟

That's pretty cool to see the process! 👍🙂

Best ASMR I’ve seen in awhile!!!! I try to look for this comment but I gave in! Good Job mate!! I’d love to do this myself, but obviously it’s a passion! Thank you! ✨🔥✨💜✨🌊✨

I saw it. At 0:51 there is coca cola can mixed with redbulls

This all looks real good... however it cant be green. Fuel, Electric (mixer and shredders) as well as all that heat to melt the stuff...

Nice video man. The sand casting seemed like it took a lot of effort for the foundry guys, did they want to do it that way for something to film or is that the preferred way when dealing with large amounts of aluminiun?

Aside from storage and transport, which is understandable, was there a reason to grind the cans to that consistency? Considering you will get slag regardless, was curious if there were other reasons.

glad to see you here again ben!

Very cool to see that there are stil small companies casting things on a "small" scale In europe ( dont know if its in the Nederlands or in belgium). Good video

How much does it cost to have it casted? Do you have any experience with CNC chips that have traces of coolant liquids?

🇧🇷 Aqui no Brasil, derretemos as latas sem selecionar, triturar, ou lavar! O forno já é o suficiente para purificar o alumínio!

I need that grinding machine in my life.

I like your video . I did the same in a small scale just for fun. Thanks for share. Saludos desde Argentina

Wow this guy has all the tools typically found at the average home. 😊

I love the video, but why did you put the shredded metal in a cement mixer?

In west Virginia where I live the price of aluminum at my local recycling center is $.40 a pound and what you have there is $20.64 total

Awesome video! Was very entertaining. And damn 51 pounds of melted can.

I like it when you melt better. But uts so cool to see how a company does it!😊

Yes make sure u separate the cans and then put them all together again.

shredders hadden weer honger ;-) en hoe zit t met statiegeld daar in België op blikjes?

To me all that was to much work to do then carry them and melt them down ( it probably costed t0 melt them down) but thats my opinion, i think it's neat to watch all of the processes though, its very educational 😊😊

Waarom sorteerde je de red bull blikjes om ze vervolgens alsnog te mengen met de rest? Het had mooier geweest als ze de baren in een grote gietijzeren coquille hadden gegoten.

23.4kg for avg aluminium price of £1 per kg, not the best deal for the work - reward ratio. However, for some reason great stuff to watch this process ;D. I am sure you will make up with the views 😉.

nice vid.. LOVE THE RS6

In Germany one can is 0,25€. We call it Pfand. So 750€

Aside from showing us how much you like redbull... why separate if they just get mixed after shredding?

Nice job. Lovve those mechines wish i had them lol

Mix the last small parts with resin!? For tables, furniture? Fun?😊

Is this how TERMINATOR T-1000 is made?

RS6 Like Button

No need to secure the bin in the back its not gonna flip kver or spill out but will scratch and damage plastic trim and cery cool video. And how did you get so many cans so fast like that where do you get them from mostly

Any plans for the aluminum you've harvested?

That’s like, $25 on a good day

У нас алкаши уже перестали эти банки собирать, пиво пьют, а банки выкидывают 😂

ZOVEEEEEL STATIEGELD HAHAHAHA

1:00 why you sort the cans and then shreeded togather??

Very nice AUDI RS6 V8 - Biturbo.

Wow 😮 A quelle tempréature l'aluminium fond? Merci

just an idea, next time when you dump cans put a layer of sheet so you can pick all of them up at the same time.

Why not built a multi-tier grinder? Put the coarsest one on top, and it empties into a medium one, which empties into a finest one on the bottom

if I noticed correctly, he only separated cans from red bull, maybe he didn't want it to happen "red bull gives you wings" 😂🤣😂🤣

The fine shredder should be placed under the course shredder to save effort and time.

How much is aluminum per kilogram there? Im only asking. Because with my math.. the cast aluminum per kilo would only be worth about 23 usd... do you fabricate anything in particular with your solid aluminum ingots?

Fun video!

I enjoyed watching the process. How often do you do that?

It was very interesting to me

Real crime is filling up a RS6 with soda cans

Wow 😮 that can save the earth ! 🎉

i dont get it.... why go through the trouble of separating the red bull cans at the beginning only to mix them with the other cans when they are shredded ? what am I missing ?

Hasta hoy supe cómo hicieron al famoso TERMINATOR #2.

Where did you get your shredders?

Where did you buy the shredder?

ive melted aluminium before but only once, i dont see how its worth shredding the cans, i know the air pockets can make it dangerous to melt right away, but shredding it 10 times or so dont seem to make sense. You could just buy a furnace or make your own with propane and do it all at home like most people doing this will do. Maybe make smaller castings so its easier to remelt also, melting like 5kg at once dont make sense unless you end up using it all, which is often not the case, i would do like half a kilo or less per mold. You can use a old fire extinguisher as a crucible if u need a cheap one, works for about 10 meltes depending on the size. You can also use the furnace to make bullets and maybe sell those for extra income, bullets tend to be made of lead though.

Que sofisticado tiene muchas máquinas bastante moderno y avanzado el tipo hizo bien en todo el proceso que conllevo no me gustó que de tanta cantidad se halla reducido pero bueno así es e hizo algo útil reciclarlo y reutilizarlo para nuevos materiales yo junto hace.mas de dos años es muy cansador por momentos pero muchas veces vivo o tengo algo de dinero por eso por qué si no fuera mantenido no tendría nada si de eso dependiese y se que estoy para mucho más suerte

So you just had that grinding up stuff at your house?

Wouldn't shredding the cans expose more metal surface area, resulting in more of the aluminium being oxidised than if they were melted whole?

Some one as way too much time on their hands. Lol. But it is fun to watch the video.

Whoa whoa whoa!!! 0:50 - there's a coke can in with the Red Bull cans! WTF, Bro?!?!?

Does somebody know, how to build the type of „clamping rail“ in the car trunk to fix in place boxes etc?

Yoo nice satin black rs6

That RS6 took all the profits in that one journey. Plus there wants much money in that anyway

Very neat to watch. But anticlimactic. Was waiting for some awesome casts.😂

I also collect cans for recyсling. Don't you know price for such cans in your region?

Just casually has an RS6

Hola!!! Sabes cuántos kilos de latitas usaste???

I watched a few seconds of this and said to myself: WHY ???? Then moved on with my life.

cost him more to melt the Cans than they are worth.

So anticlimactic that the big ingot broke, still fun video! Btw, how many red bull cans where there? Cheers!

😢столько времени ушло😂,на заморачивание??(

I am kinda disappointed you didn't melt and mold it by yourself,i miss metal casting video you very often do

What was the point of the sort? Just wondering!!

Nice numberplate! :)

Imagine how much pfund in germany this would be...

Process : First separate the cans for just 10 hours , and then grind the cans and then mix all the grinded can pieces in a minute,, simple..

how much did it Weight before?

I love your Audi!

German auto van and the rx6 ?

Банки сдал и поехал покупать новую печень 😂😂😂

Hermosa Linda ❤❤❤❤❤

…and why make the particles that small before melting?

Would of got you $300 cash here in Australia just as cans.

Почему ты не используешь банки из под пива "Старый мельник" или "Балтика-3"?

In sweden those cans would give you 150 bucks...

Bonjours, ou peut-on acheté un broyeur comme le votre? Bonne continuation

Que besti....aaaa para que las separa, si siempre las va a revolver, sea lolo..

Legend