Perfect timing I just bought myself an enclosed trailer

Hey I insulated the inside top of mine and sheeted it. Also installed LED strip lighting which is powered by a recessed (in the floor) battery. In the front triangle area, I built upper cabinets and shelving below. Also I used those metal strip brackets on the floor and one side. Very versatile and you can change things up with them. Also installed adjustable hook brackets on each side for clothing, gear, helmets, etc. And lastly I built a fold down bench for sitting and putting my boots on. It folds flat against the wall when not in use. Good luck with your build!

Use a roll of skateboard grip tape on the ramp door for those rainy motos or water dripping from power washer. Wanna keep B unit on 2 feet.

IM SO EXCITED !!!

Really great diy, can't wait to see the finished product.

Don't forget to take in consideration the front to back and side to side weight distribution in the trailer. I would install a rectangle shape water tank and move it close to or over the axels if possible.

Nice Vid Jeff!

Any update on this project? I would love to see pics as I am working on my trailer and wondering how to set it up. Love the paint and the flooring!

Can wait to see more of this

Buh buh buh buh B-UNIT!! Let’s get it this year Good Luck with all the nationals

The water tank, because of the weight, should be at least over the axles or just forward of them. Too much weight on the back of the trailer will make it unstable when driving.

Holy crap!! Looks amazing.

Nice dude, guys this dude listens to his fans thanks Jeff love this and love how it kind of gives us a different look at your personality without the inherent stresses of moto... super cool thanks guys and can't forget #teambridge

looking forward to the season!!! Looks good Jeff

Might want to put some heavy staples around the edges of the mat and secure it into the plywood

Awesome video, thanks for your time and sharing!!!

Love the PROCESS 😎

Can’t wait for the next trailer build 👌👍

The soh-cah-toa joke made me laugh. I guess being a nerd pays off. We get our own jokes😂

All I hear is “how do you become rich racing Moto? Start off a millionaire “ 😂😂

9:17 had me laughing when Jeff Yehaaaed😂😂😂

Nice video 👍👌

Make sure you have a spare tire, jack that works with your trailer and something to get lugs off. If you carry in impact just get the correct impact socket. Four will obviously work.

B unit and MAMMA walks be comin in clutch🤘

Great video I'm looking forward to seeing what you do with the space, have considered weight distribution, especially having to much weight behind the rear axel can make the trailer fish tail.

I like those shoes. Great content man!! Good luck this year🤙🏻

Nice before and after!!! Looking to put down vinyl flooring on my enclosed trailer too; curious as to whether to weather proof paint floor beforehand or whether laying flooring would cause floor to warp because moisture can’t escape.

use your left over rubber flooring as a baseboard, it'll clean up better than the white painted surface. Black caulking at that joint will make it look clean and seamless. enjoy your build.

Yep, it's official. You're a totally awesome dude, JW.

I would use caulking instead of quarter round. Black would be ideal. Makes a water tight seal so you can pressure wash your trailer. You can do both but quarter round is fragile.

Def want to use an adhesive for the flooring. I did.

You should insulate the roof/ceiling & the put some kind of paneling over it to make a nice ceiling. Try to keep some of the heat down.

Epoxy with paint chips works great for race trailer floors

No southwick this year.. bummed I can’t see you on the ktm. I see hella haters about “mommy:daddy money. Disregard them, you’re burning race fuel and grinding. Keep entering everything you can. Money and the size of rig does not matter. Chin up keep thumping ! Ktm 👍🏼

Put the water tank in the nose of the trailer and use the side door for the hose to the power washer

I just broke my left wrist and right shoulder so I’ll be watching you for a few weeks

Hey jeff you can get a rectangle water tanke and bolt it to the bottom of the trailer and then have an outlet on the side or hook up a little pump to pump the water if you have enough ground clearance

Love the flooring! Have you considered sealing the edges with clear silicone, so that if there are any spills there is no way of the moisture getting underneath the rubber?

You should put the L shaped metal strips around the edges of the floor and wall. We have the same floor just gray and white walls and it looks great.

Love the American flag 🇺🇸 in your background.

Just use some caulk around those edges either white or black would look sick plus it would seal it a lot better than wood!

I just got one and I have a TV and sound system in it 😁

Any more videos of the trailer build?

J walk bro I have been a inspiration in my life and drive me to get back racing u are a true American role model thanks bro I are a big influence on my life bro good luck dis year

Mount the water tank on the trailer tongue

A ramp rear door blows though you lose alot of wall space.also frame in in the v nose a heater slash a.c unit then mount the propane tank on the tounge.

Sucks that a lot of us, won’t be able to come and see you in person at the Nationals this year. But, if I can’t make it to Springcreek this year, I’ll be rooting for you from my couch.

Does it have a roof vent? If not, it might be a good add on to do. Also, vents in the helmet/boot cabinet so they don't get all hot and stanky. 😄 looking buttery good job

Seen somewhere low profile water tanks that a guy was able to mount under the trailer so that it didn't cut into the interior room. Bonus of filling it and not worrying about spilling too much water inside the trailer. The low profile tanks spread the weight distribution over a large area (mounted horizontally) so I think you don't have to worry much about the placement other than physical fitment. I'm thinking about buying a trailer and doing the same, so I'd really like to see you figure it out! Heard some pressure washers don''t like the low height of the water inlet though for priming purposes maybe.

I just got my trailer and the floor is well used and dirty, so I’m thinking rubber mat. How has this held up to dirtbike duty? Kickstands and tires haven’t damaged the mat? Thanks!

Get some more of the flooring and do the ramp door with it.

Would you ever take a full time ride into ama motocross from hrc honda if you ever got a chance to ride with them

5:25 good job Jeff, doing the hard work of filming, and you let B unit have the easy work of just rolling and brushing on some paint. Your man treats you right B unit!

Trailers are a pain in the ass van still best way to go

I got a single axle 6x12 because im pulling with a V6, fits my microsprint with about 900lbs to spare capacity wise. But I didn't really plan in my head the weight from tools, cabinets, etc. How much does that flooring roll weigh? I've seen rolls that were 150lbs before I gotta be careful with my weight lol

Aye

How r u going to clean the rubber flooring w that texture

coming along nice Jeff. you didn't need to gluethe rubber flooring in place, just curious. Or is it so thick and heavy you didn't have to really.

It looks way better

Un fan mexicano 🙋🏾‍♂️

Jeff heavy weight should always be on the front of a trailer look up for trailer whipping

👍

I would just caulk the edges with silicone instead of the 1/4 round. That way no water can penetrate. Put a bead down and spray it with windex and wipe it with a sponge for a perfect bead.

You should get aluminum cabinets

5:28 oh yeah!

Build a small work bench over the water tank

SUBSCRIBED

Rubber mats are slippery when wet. Defintely not a good idea for the ramp. Using truck bedliner is also popular and it can be sprayed on, rollered on and brushed onto the floor and the wall's bottom tirm. At the mating joint area between the wall and floor the bedliner stuff will seal that gap and I have seen people water hose or gently power wash the floor and not have to worry about water getting into the floor or walls.

Yo Jeff Do you have a risk racing code? I have the lock and load system and love it

Cara um dia vou ter uma moto igual a essas 😁

Does the floor have winkles in it? Or did you glue it down?

Jeff, did it wrinkle up any at all when you laid it inside the trailer?

Can you make an full tour? Where you show everything to you shelfes and everything

whens par 2

Insulate the roof at a minimum, any 3/4 to 1 inch foam board will do. Cut it nice and tight, then use foil HVAC tape for the seams. The hard part is putting up some paneling on the ceiling after insulation, but its worth it once you note the difference in temp radiating on your head during the summer sun

What is the water tank for

id put black caulking around the flooring

SOH CAH TOA was Trig bro! lol trailer looks great man

Jeff I really wanna see the 2 smoker 🌪 she almost done

Did you ever make a follow up video?

What size trailer is that?

Do you ever plan on making a video of you riding that cr250

What ever happened to this it was such an inspiration to my trailer build

Pt. 2

Update on finished build?

Do a vlog from racing with your brother.

Bro me my dad and brother just made a sick toy hauler out of an old box truck for my enduro races

Get a awning off the side of the trailer

Is the scar on your left wrist from racing, what happened ?

And Part 2 is located where?

Is the rubber flooring fuel resistant

yur gonna want to put the water tank near the front. on the tounge if you can. or maybe stick to filling it up at the destinattion

Did you glue the flooring down?

Water tank that far back is a bad idea. Its going to really mess with your tongue weight.

Can you link that coin flooring? I’m doing my trailer now. Thanks.

Put the nonpotable water tank on the tongue of the trailer

U can put ac in that

Part 2

Yo was this your only trailer vid? I cant find the rest. thanks for the vid though sick channel m 5 year old races a ktm 50 pro sr and im in the middle of converting out trailer like this into his race trailer

My dad put a couch and a shower in his trailer. Edit: Why did people like this?