Had my Kubota BX2380 for 3 years 350 hrs. No issues at all. A real work horse. One accessory everyone should have on your tractor cost less than $20 a steering wheel spinner knob.
@PeeksPeakHobbyHomestead Жыл бұрын
I have never actually used a steering wheel knob. I may have to pick one up and give it a shot!
@troyb.41014 ай бұрын
A suicide knob? That's what I think you are referring too!The "Steering Wheel Spinner Knob" was invented by Joel R. Thorp of Wisconsin in 1936. The Brodie name is a reference to Steve Brodie and was meant to describe all manner of reckless stunts. The device is often called a "suicide knob" because of being notoriously useless for controlling the wheel during an emergency.Feb 24, 2021
@KillingItCountry2 жыл бұрын
The only mistake I’ve ever make with my Kubota BX … is not leaving it at the dealership and getting a bigger Kubota … it’s great for its size but they’re limited. Nice video!! 👍
@PeeksPeakHobbyHomestead2 жыл бұрын
I think that’s interesting. You must have some heavier lifting to be done around your place. I have been satisfied with what I can get done in mine. I have found it’s limits for sure, but weighing my budget vs what I can accomplish, this was the right size for me. 👍
@KillingItCountry2 жыл бұрын
@@PeeksPeakHobbyHomestead 100% I feel ya on the budget!! I have to pay off the mini ex before we buy anything else 😂
@PeeksPeakHobbyHomestead2 жыл бұрын
@@KillingItCountry That mini is one sweet machine!
@bobach60832 жыл бұрын
I think if I was going sub compact I would do the 1025r John Deere. However I'm looking at my first compact. I just think the sub compact is a little small. The B2601 looks nice.
@franktirelli2 жыл бұрын
Bigger might be better in some cases but having the backhoe is what really makes this a gem. I also had lost my hydraulic fluid by dislodging the rear axle seal by running over some wire.
@robincompton015 ай бұрын
Thank for the Great Explanation of this Tractor ! I'm taking delivery of mine next week and looking forward to using this on my mini farm... I'm to OLD & FAT to do manual labor... Especially, using a Self Motivating Excavation Shovel, Rakes, etc... Again, Thank you for the update and the maintenance advice... RLCSR...
@mitchb43782 ай бұрын
I have the same tractor and love it. I had one warranty issue that was looked after by my dealer, the rear PTO seal started leaking after using the brush hog, replaced and oil topped up by the dealer and no further issues. I did have to tighten the throttle bolt and nut, i wasn't staying up at RPM, easy job after watching a youtube video. And lastly, the removal of the oil and hydraulic filters proved to be challenging, I'm not sure who tightened them at the factory but way to tight.
@PeeksPeakHobbyHomestead2 ай бұрын
Yeah they are great machines! First maintenance is tough because of those filters! 😂
@regs38362 жыл бұрын
A well done video… You mention using a pressure washer to wash your machine. I used an electric PW on my new to me but dirty l4060, I quickly found that it wanted to strip all of the stickers off. Then I found the Messick’s video that strongly suggested not using a PW. Now I just wash it like I would my car. We have 40psi out of our hose plenty for rinsing off, hot soapy water to wash and then rinse. My l4060 has never been back to the dealer, 0 problems since it was originally bought by my neighbor, who used it commercially for 1065hrs. Though when I got it, it was dirty, and the grease joints were dripping huge globs of grease. From lack of use the joy stick lock was stuck in the free position as well as you’d never have been able to tell that the steering column has a spring to pull it out of the way when you push the pedal. So mostly it was well maintained and came with a complete extra set of filters.
@PeeksPeakHobbyHomestead2 жыл бұрын
Thanks for commenting! There was some discussion about that pressure washer video from Messicks on a FB group I’m in. I really never gave that much though. I appreciate the heads up!
@stonehousebarn27372 жыл бұрын
Great video. We've had our kubota for about a year now with no problems at all. Prior to that I had a cheaper re-badged tractor from a large manufacturer. The last year I had it, only was able to put about 15 hours on it due to breakdowns and parts availability. So, really happy with the kubota.
@PeeksPeakHobbyHomestead2 жыл бұрын
Glad you got you a Kubota. I looked at RKs and LS when I was shopping and the crazy thing is I bought the Kubota cheaper than either of those. 🤷🏼♂️
@lcswartz49 Жыл бұрын
I plan on keeping right BX for a long time I push snow in the winter time if we have any the salt from the roadway, ate the floor pan up on my tractor, not a big deal was only 100 bucks to replace but after that, I took my body off from the floor peeing over top of my rear wheels and I took it to my local Line X dealer and had my tractor light mixed. It’ll never rust. It’ll last longer than our bodies will also on my tractor I had a problem with the bonnet on the front of my tractor it kept breaking off, made it was made of cheap plastic, so I also heard that Line X. And guess what I haven’t had a problem cents just thought you’d like to know.
@danstevens22042 жыл бұрын
As a parts manager here in Aus I totally agree with your comments on front tyres. Other than that we rarely sell anything for them except oil and filters.
@PeeksPeakHobbyHomestead2 жыл бұрын
Thanks for the comment! I appreciate you watching!
@tedmakrinosjr393711 күн бұрын
Watched your videos and love em.. I have only a half acre lot, my elderly parents down the street, my dad owns a shooting range and my in laws are 7 minutes away.. its been over a year I’m trying to justify the 0% 60 months purchase of the bx23s … I’ve read a lot of positive reviews and resell is amazing on these… would you recommend for small lot / projects to improve /maintain multiple properties … to include fixing drainage, building shooting mounds, leveling yards, etc. Thank you for your time and consideration and enjoy the videos. Stay safe and keep posting please!!
@PeeksPeakHobbyHomestead11 күн бұрын
Man, I think it has been one of the best investments I have made. I have accomplished so many major property upgrades with it that it has easily paid for itself. I am outgrowing it a little on the tractor side, but if I buy a new tractor I will keep the BX23S for mowing and backhoe jobs…
@hiteck0072 жыл бұрын
You know I checked out the JD & the Kubota but instead bought a TYM T265 because it was the only one that had all the optional extras standard & what really broke the deal was JD & Kubota both dropped the Vital Turning Brakes which I really need on hilly blocks. I've had it a couple of months now & am very happy with it. The TYM has much more capability than the other 2. Our old Kubota is in retirement now.
@PeeksPeakHobbyHomestead2 жыл бұрын
I’m glad to hear that,Man! I have not had a chance to check out the TYM yet. I’ve heard good things. Thanks for stopping by!
@xdude2x2 жыл бұрын
Have a BX2670 with 350 hours on it, have had zero issues (knock on wood). Thanks for the video
@PeeksPeakHobbyHomestead2 жыл бұрын
Nice! Glad you are having good luck! You can’t beat these machines! Thanks for watching!
@Madcharlie28394 ай бұрын
A little over 200 hours on my BX23. I’ve had 2 front tire side cuts, (my fault). Similar backhoe control arm issue, (treaded rod broke at rod end). The tie rod end for the FEL control has broken twice. The throttle arm broke where the nut attaches to the cable. I like the tractor, but simple upgrades to very basic and often used hardware is in order.
@CH67guy12 жыл бұрын
That’s a nice looking Super Beetle! I bought my Kubota TLB earlier this week. Should be delivered next week. I have half a dozen projects for it already.
@PeeksPeakHobbyHomestead2 жыл бұрын
Thanks, we are about to pull the engine and rebuild it. Fun little cars. You will love your Kubota. I would love mine and use it pretty much every day!
@CH67guy12 жыл бұрын
@@PeeksPeakHobbyHomestead Do you have any advice for learning to dig with the machine? I have a couple trenching projects. In the past I’ve hired contractors. I want to work smart with the machine, to do the most work in the least amount of time. Professionals make it look easy, but I’m sure, like any new skill, there’s a learning curve.
@PeeksPeakHobbyHomestead2 жыл бұрын
@@CH67guy1 The biggest skill I learned as a timesaver was how to safely move the machine along the digging path without flipping the seat around and driving forward. A neighbor showed me to leave the machine in neutral without setting the brake and use your outriggers and bucket to hold the machine in place. When you need to move, stab your backhoe in about halfway out and then raise the outriggers just above the ground and lift the bucket. Use the backhoe to ease yourself along. This takes some practice and it could get away from you especially on a hill. I would get good and comfortable with the machine and then practice on level ground, but once you get the hang of that, it will save you loads of time. 👍
@CH67guy12 жыл бұрын
@@PeeksPeakHobbyHomestead I watched your video of you trenching for the electric conduit at your church. I saw your machine rolling with you seated at the backhoe! I wasn’t sure how that was happening but now I understand! Thank you for taking the time to help out a newbie!
@martyb37832 жыл бұрын
Great video. Mine is still pretty new so no problems so far. I will keep my eyes open for the issues that you had. Thanks for taking the time to make this video!
@PeeksPeakHobbyHomestead2 жыл бұрын
Thank you for watching and commenting! Enjoy your Kubota!
@PaleHorseOutdoors2 жыл бұрын
Hey Lucas, nice video buddy! So far the only thing broken on my B2601 was caused by operator error and a couple of low hanging Fir limbs. Kubota makes amazing equipment. They're not perfect, but damn close!
@PeeksPeakHobbyHomestead2 жыл бұрын
Definitely a solid product!
@NiceTriGuy2 жыл бұрын
I have about 350 hours on my Bx23S, use it like a tractor should be used and I love it. I am starting to get a bit concerned though. I have a rear mount blower that has used up about 1/3 of those hours, a mower deck only used a few times, a bush hog, twice and a post hole auger maybe 20 holes both over a year ago. Added a hitch mount power winch on the front, so yes I use it for a variety of tasks. First time I removed the loader the quick couplers leaked after I put it back on…. Full warranty replacement. A branch jammed into the fan shroud underneath so added a guard. The safety switch under the seat has been annoying, same issue as this guy with the front tires, now run turf tires in the summer and R4s w chains winter. This winter second heavy snowfall noticed a puddle under the tractor… hydraulic fluid… took it into the dealer and the entire PTO gear box was shot. $7K to fix it and no explanation from the dealer why it happened or how to prevent it from happening again. They suggested a seized PTO drive shaft or a non kubota snowblower (forgetting that they sold the blower with the tractor). The dealer is very good, a bit farming oriented, but good. They apologized that there was no kit or easy fix for the PTO, case was cracked and the entire drive train replaced. I will be afraid to use my snowblower next winter or any other PTO driven implement. YIKES!
@PeeksPeakHobbyHomestead2 жыл бұрын
Wow! Sounds like some tough issues! I sure hope you have better luck going forward. I always worry when I hear stories like this, because I don’t take it easy on mine either. 😳. Best of luck to you!
@bobach60832 жыл бұрын
I would think perhaps even though the blower was made by Kubota I almost guarantee you the tractor was underrated for that blower even tho it came with it.
@RossOnTheLand2 жыл бұрын
Nice one! I had the same issue with the backhoe controls. I'm at 99.4 hours right now and will be doing my 100hr service tomorrow. Thanks for giving us the overview
@PeeksPeakHobbyHomestead2 жыл бұрын
Thanks, Ross! You going to share your service with us? I was planning to change my oil and flush the coolant today, but we had a little ice storm and UPS didn’t run yesterday so I didn’t get my oil filter. 🤷🏼♂️
@007bird Жыл бұрын
great video I learned in machinist school set screws are one time use always replace them. if you remove them change them. if they loosen replace them if you tighten them, they will come lose again. they lose the grip on the end of set screw. always replace with same style end as original there are different styles and uses. I recently rented this tractor good machine.
@PeeksPeakHobbyHomestead Жыл бұрын
That’s good information. I had never heard that! Thanks!
@WilliamsonRidge2 жыл бұрын
Great video Lucas! That little Kubota has served you well, I’ve had minimal problems with my Kubota M6060 with 460 hrs.
@PeeksPeakHobbyHomestead2 жыл бұрын
Thanks, Paul! That M6060 is a sweet machine for sure. Love seeing that grapple in action.
@ticklemeorange83282 жыл бұрын
Cleaned up pretty... Really good video, these things can be run pretty hard and still last a lifetime.... and CONGRATS on 1000!!! 🥳
@PeeksPeakHobbyHomestead2 жыл бұрын
Thanks! I hope to get a lot of years out of mine!
@matthewrounds22162 жыл бұрын
Real nice Super Beetle there in the background!
@PeeksPeakHobbyHomestead2 жыл бұрын
Thanks, that is the first project once we get concrete in the new shop and get moved in!
@midwesternoutdoorsandnatur82722 жыл бұрын
Just rolled over 400 hrs on my 2380. It’s tough as nails for it’s size. Just a new set of front tires to replace the wimpy 4 ply factory pair and I have worked it hard.
@PeeksPeakHobbyHomestead2 жыл бұрын
I am hoping to go with a set of R14s for my next set of tires. I’ve heard good things about them.
@WichhartAcres2 жыл бұрын
I heard Eastern Kentucky and thought of a song! In the deep dark hills of Eastern Kentucky that's the place where I trace my bloodline. Great tune! I think it's called never leave Harlan alive or something like that. Anyway lol.. Great review! So far no issues with my bx23s! Knock on wood. The grease zerks painted over have beef the worst I've dealt with.
@PeeksPeakHobbyHomestead2 жыл бұрын
I love that song! I think I had a couple grease zerks painted over too. I didn’t even remember that. Solid machines though. I’d buy one all over again.
@faulltw2 жыл бұрын
I have this very same machine and am going to look for those issues so Thank you!
@PeeksPeakHobbyHomestead2 жыл бұрын
Thanks for watching and commenting!
@D703402 жыл бұрын
Great video sir. I bought the first 2017 BX23s that came into our dealership. I`ve had only one issue with mine... the joystick for the frontend loader got all loose and floppy. Couple of the functions wouldn`t work because the joint connections had loosened up to the point that it quit working. Same problem you had with your backhoe joints, loose. My fix was the same as yours. Blue loc-tite, problem solved ever since. I loc-tited the other one while i was in there, too. If you have to get down in there to re-tighten the joystick for the loader, its rough getting that black plastic cover off. Couple of the bolts for the cover are hidden real good, just a heads up. As for any other issues with mine, nothing. It has been such a great tractor for me. If i had it to do over again, i wouldn`t hesitate buying a BX23s. I dont need anything bigger than the BX. Its VERY handy around my home. It can go places the bigger tractors won`t go. One really good upgrade i did on mine was getting rid of that tiny fuel filter under the rear of the tractor. I installed an auxiliary cartridge fuel filter assembly from a Kubota L series tractor. I mounted it just ahead of the FEL frame just in front of the floor board. Its really nice to be able to change the fuel filter without crawling under the tractor. Here is a friend of mines video of the AUX fuel filter assembly kzfaq.info/get/bejne/qNGJordmvrXVaIk.html This fuel filter MOD is an awesome upgrade. He installed his in the exact same location i did with mine.
@PeeksPeakHobbyHomestead2 жыл бұрын
Awesome! Thanks for the great information! I’ve heard about the fuel filter mod, but I hadn’t checked into it. I know the OEM is a bear to change. I’ll check that video out. Happy tractoring! 🚜👍
@wildbill23c2 жыл бұрын
I have heard a lot of people replacing that stupid fuel filter under the tractor with an L-series filter and mounting it up by the engine next to the loader mount...I'm seriously considering that, and if the dealer wants to push the issue I'll simply tell them that's how it should have been from the factor instead of that dollar store pile of crap filter under the tractor body in a terrible location...there's really no need for that type of filter on a machine of this size and cost. Pretty sure it might be about the same filter that's on my lawn tractor...seriously Kubota a $5 filter on a $20k+ tractor...horrible thought/engineering or lack of both went into the filter selection and locations....the L-Series filter assembly makes replacement and cleaning easy, and definitely worth the swap. I for one hate crawling around under equipment LOL.
@OrangeismyNewGreen2 жыл бұрын
Great info Lucas, I’m not sure but I think you’re thrilled with your Kubota 😉👍🏻, so am I, love it 👍🏻. Thanks for the cleaning shoutout 😂😂. Have a great weekend my friend 🙋🏼♂️🙂👍🏻
@PeeksPeakHobbyHomestead2 жыл бұрын
You’re the gold standard for clean tractors. 😂 🚜👍
@OrangeismyNewGreen2 жыл бұрын
@@PeeksPeakHobbyHomestead 😂👍🏻👍🏻, forgot to mention Ross from Ross on the land had I think the same issue with the backhoe levers where one got loose. 🙋🏼♂️🙂👍🏻
@PineyGroveHomestead2 жыл бұрын
Hey Lucas, just like expensive vehicles, no matter how much we pay or want them to be perfect, they are machines and things happen to machines over time and as you use them. I finally got around to reviewing my L3901 and that video will drop Monday....lots to like about the L series, but also some things the engineers do that make you scratch your head!! Do you think the R14 tires are better for puncture resistance than R4s or are you just looking to try something new? R14s do look pretty cool though!! I've got a R4 front tire in the bed of my pickup now....picked up a nail. Always something!!
@PeeksPeakHobbyHomestead2 жыл бұрын
I have my doubts on the R14 being better for puncture resistance, but I’ve been hearing folks say the traction is a little better without sacrificing damage to the lawn. I saw someone suggest running 50psi in the tires to stiffen the sidewall. I haven’t had the nerve to do it though. Looking forward to checking out your video. I’m sure that L3901 is a sweet machine. That’s a real tractor there!
@MJADoingStuff2 жыл бұрын
Yep Lucas I think Kubota makes a great tractor. I am happy with my purchase. I am not sure if the side wall on R14 are better than R4. Have a great weekend 😁👍🚜💨💡
@PeeksPeakHobbyHomestead2 жыл бұрын
Yeah, I don’t know. Maybe my biggest issue is I need to run higher air pressure and be a little more careful. 🤷🏼♂️ Still nothing to be too concerned about.
@John-vd6sk2 жыл бұрын
@@PeeksPeakHobbyHomestead air pressure is suppose to be 21 lbs. on the front tires and I know on my BX23S that a few times when carrying a load in the bucket I would have to stop and fill them up with air...I would like to see a higher sidewall myself on those front tires but the BX is a surprisingly stout little machine , it has much more ability then I thought it would....
@PeeksPeakHobbyHomestead2 жыл бұрын
@@John-vd6sk I agree, I am surprised at what it can do. I read some guys saying they run 50psi. I wasn’t too sure about that. I wish the sidewalls were a little higher too!
@FlatCreekOutdoors2 жыл бұрын
Good vid. I was thinking about making a similar vid for my L-series. I'm coming up on 400 & 3 years use. My story would be much like yours. No real issues except for what I've broken & pleased with the tractor overall.
@PeeksPeakHobbyHomestead2 жыл бұрын
Thanks! I think you should do it! When I was shopping, this is how I researched. I wanted to hear from the guys who have used their machine for a while to know what to expect. I really couldn’t be happier with my tractor. 👍🚜
@faithsfarmlife14242 жыл бұрын
came over from orange is the new green , getting you some support , so far my Kubota has been great , just had it serviced and they brought me back the wrong one. LOL , have a agreat day
@PeeksPeakHobbyHomestead2 жыл бұрын
Hey, Thanks! I appreciate the support. That’s kinda funny they brought you the wrong tractor. Hope they got you squared away quickly!
@faithsfarmlife14242 жыл бұрын
@@PeeksPeakHobbyHomestead yea I posted the video on my channel, he apologized but not after having to argue ,
@lcswartz49 Жыл бұрын
I just replaced the seals around the pivot bolt because I was losing fluid. It was easy maintenance took a little longer than that. I would like to do it and it cost me about $76 for force, a ring seals and a sleeve. I did not replace the bolt itself because the bolt itself was $45. just thought you’d like to know
@schylerelkins6057 Жыл бұрын
Great video. I live in Catlettsburg ky and I am considering a bx23s from Davis. I am between the bx and the Massey gc1725.
@PeeksPeakHobbyHomestead Жыл бұрын
My biggest consideration first was how far do you have to drive for Massey Service? Next, Kubota resale. I’m sure they are great little machines, but I would buy a Kubota from Davis every time. (Not sponsored). Stop by there and tell the Lucas said they need to convince you to buy a BX23S. They will. 😊. Good luck no matter what you choose!
@wildbill23c2 жыл бұрын
Given what you have done with your BX and the issues you have discussed here, I shouldn't have any problems with mine other than caused by myself LOL. I've done some stuff on mine that caused some minor issues, easy fixes though, luckily as my dealer doesn't seem all that interested in anything once they got their money. A lot of initial things that made me question my purchase though. Every nut and bolt on the machine seemed loose upon delivery, lug nuts included. Had a hydraulic leak on day 1, luckily I had pulled the tractor up on my concrete carport to checkout the loader removal feature so I found the leak on a hard line off the left side of the transaxle, tightened that up and added some fluid and haven't had another issue. I do have mysteriously disappearing coolant however, which is quite concerning as there's no external leaks, but the overflow bottle will get low after a month or so and I have to top it off again to bring the level back to about mid way between full and add. Engine seems fine, haven't had to add oil, fuel system seems fine but I started using a fuel additive on day 1 to prevent any problems in the first place. They're so busy they aren't doing very good at assembly and inspection at the dealership it seems. My tractor has spent most the winter hibernating in the shop, I go out once in a while when I remember to and start it up and let it run for a while, but don't really use it in the winter for anything. Right now I have 32 hours on it, so the initial fluid/filter change is coming up soon. I'll be changing the oil/filter, fuel filters, and the hydraulic fluid/filters as well and switch over to the UDT-2 hydraulic fluid while I'm at it....and of course clean out the screen filter in the hydraulic system when I find where its located LOL.
@PeeksPeakHobbyHomestead2 жыл бұрын
Wow, sounds like they needed to take it a little slower at the dealership on their inspection. I would say now that you have things tightened up, you will be good. I have not added coolant to mine before, but it was down below the low mark in the overflow tank this time when I went to flush it. I am not sure why. 🤷🏼♂️ I have a video on the hydraulic fluid change and screen cleaning. If you have trouble figuring anything out, you might watch that one…
@wildbill23c2 жыл бұрын
@@PeeksPeakHobbyHomestead I'll watch your video on the fluid change....thanks.
@glenalguire6960 Жыл бұрын
Be careful with the pressure washer I’ve messed up two seals on the hydraulic cylinders as well as contaminated the oil
@BigDaddyKrapper Жыл бұрын
Have had a BX25D since 2012 4700 and some change hours on it. 2023 it is time for a new transmission and a engine rebuild. Have had a BX22 since 2002 and it just keeps going no idea about hours on it now days. The New M5660 I bought July 2022 the tractor is great but the loader was defective one arm 2" smaller all the way around 3rd day I owned it the tilting the bucket up and down was putting the quick connect in a bind and bent the quick connect and the bucket fell of while mowing a pasture off. Dealership came took the loader off took it, the bucket and filed a warranty claim, which Kubota denied, so I bought that Orange protetion insurance plan and had to use it. The insurance bought the new loader with no problems. Kubota claims I hit something and bent the arm but the arm is 2" shorter on every straight line measurement neither here or there at this point. Toward the End of February and I am still waiting for my New Loader to arrive and all I get from Kubota is sometime between next week and 12 months from next week. VERY ANNOYING when you drop $60,000 on a new tractor/Backhoe/Several Quick Connect attachments and have to use you 46 year old ragged out Massey for any substantial bucket work. If you looked at the fb page I built that big pond dam and little pond dam with the M5660 and a $1000 King Kutter Box Blade lat summer. Put 780 hard hours pulling heavy boxes of clay on the tractor from July through October . Can't complain even a little bit about the tractor or its performance. The loader part of it though makes me see Red NOT ORANGE :) The BXs are little war horses. I somehow manage to puncture and cut the front tire sidewalls on a regular basis :) I started buying the much cheaper aftermarket tires and rims in pairs on amazon for less than what just the Kubota tires cost. And I find their bar tires get better traction than the official kubota tires do. My only real complaint about the BXs is the brush I go through constantly pops the blinker cover off and sometimes I find them and sometimes I don't. So started putting a zip ties around each set and have not lost one since. Kubota has not given me a reason in over 20 years to say anything bad about the tractors and Landpride generally the same high opinion with. That loader on the new tractor and Kubota not taking ownership of the defective arm....... That I can not say enough bad things about :)
@PeeksPeakHobbyHomestead Жыл бұрын
That is a real shame to hear that on such an expensive piece of equipment. I’m amazed to hear you are over 4K hrs on the old BX. That is pretty impressive. Unfortunately it doesn’t take too many issues like you are having on your new machine to destroy a reputation. I hope this isn’t a trend.
@lcswartz49 Жыл бұрын
You said you were gonna buy a tie rod covers or boots they make heavy duty tie rod boots and also if you’re going to buy our 14s do you wanna get them off of Amazon cause you bought the tires in the wheels come together don’t buy the wheel separately because you’re regret it later on and I think you’re right about 600 and some dollars for a set of four
@PeeksPeakHobbyHomestead Жыл бұрын
I decided to forego new tie rod boots. I will just replace the tie rods when the time comes.
@leopapanagiotou1468 Жыл бұрын
Hello from northeast Ontario I like your videos and how you take care the machine just bought the same one brand new 2 days ago and I'm in love with it 😍 keep up the good work
@PeeksPeakHobbyHomestead Жыл бұрын
Wonderful! Thanks for commenting! I am definitely a huge fan of the machine!
@patrickwhitehead96592 жыл бұрын
First time I’ve caught your channel…I really enjoyed it. I’ll be watching more. Wondering where you are at in KY? I live in Greenup and sounds like you must be in the neighborhood!
@PeeksPeakHobbyHomestead2 жыл бұрын
Yeah, Buddy! We are in South Shore. I appreciate you watching!
@patrickwhitehead96592 жыл бұрын
I’ve got a BX25D that I purchased from Ricers in 2015…I love mine!
@PeeksPeakHobbyHomestead2 жыл бұрын
Nice! They are great machines!
@smanjik2 жыл бұрын
thanks for the run down.
@PeeksPeakHobbyHomestead2 жыл бұрын
You’re welcome! Thanks for watching!
@TheTennesseeFrontier2 жыл бұрын
You’re like me . . . I don’t hesitate taking my equipment to the limit. What is the load chart for anyway?! 😅 Nice video! 👍🏻
@PeeksPeakHobbyHomestead2 жыл бұрын
Yeah, I got it to work. If it breaks, I’ll fix it. 😂. Thanks for watching!
@sktech762 жыл бұрын
Great video! Ive had my bx23s for 2 years now but only have 106 hours on it. No problems so far! What part of Eastern Ky? Im from the Bell county ky area in southeast ky
@PeeksPeakHobbyHomestead2 жыл бұрын
Thanks! I’m in Greenup County right up near Ohio.
@MySliceOfHeavenoutdoors2 жыл бұрын
Sounds like you were rough on the tractor, lol, Nah, glad there was no major issues with it.
@PeeksPeakHobbyHomestead2 жыл бұрын
I never show a lot of mercy to anything I use, but yeah, this is a pretty tough machine!
@rexmundi8154 Жыл бұрын
I have a hill farm near Irvine Ky. I’m seriously looking at one of these
@PeeksPeakHobbyHomestead Жыл бұрын
I would buy it again for sure! Best farm purchase I’ve made. You’re only a couple hours from here…. You should seriously consider talking to Davis Equipment in Ashland, KY. They are worth the drive to do business with.
@450rhino12 жыл бұрын
Great info. SUBSCRIBED.
@PeeksPeakHobbyHomestead2 жыл бұрын
Thank you!
@tractortalkwithgary12712 жыл бұрын
I understand that those are great little tractors. I kn ow how you feel about keeping the tractors clean. I haven't been able to wash mine because of issues with my well. Those have been resolved but now I am dealing with freezing temperatures. The below zero kind. Won't be washing it for a while. I don't know if you are subscribed to "Hillside Acres" but he did a video on owners having issues with the front axle oil being low. Mine was one of those that was low. I see that you are closing in on 1000 subscribers. Have you had any issues with you tube as far as your subscriber count?
@PeeksPeakHobbyHomestead2 жыл бұрын
I actually saw that front axle video just a few days ago and subscribed to Hillside then. I fortunately was one of the lucky ones. Mine was full. However, I did drain mine a while back and refill it with gear oil instead of the UDT2. I just felt like it should have thicker lube. 🤷🏼♂️ So I’ve been hearing about the subscriber purge and I keep expecting to wake up and find that I’ve lost a bunch of subscribers, but so far so good. How about your channel? Everything holding steady?
@wildbill23c2 жыл бұрын
The front axle oil was low on mine as well...and I have conflicting information as to what oil is supposed to go in it...some say hydraulic fluid, others say gear oil. What's in it now seems like it would be hydraulic oil as its too thin to be gear oil, so I added enough hydraulic fluid to bring the level up to where its supposed to be.
@tractortalkwithgary12712 жыл бұрын
@@PeeksPeakHobbyHomestead ,I wasn't losing any subscribers as far as I know. It was that I would show a gain of one or two but the count never changed. I've lost subscribers. We all have. But for one to fall off at exactly the same time as a new one subscribed? Several times in a row? I saw a pop up of a video by Luc from "Orange Is My New Green" Friday night. He usually posts a video every Friday morning. I checked my notifications throughout the day when I had time and nothing. Come to find out, I was unsubscribed from him. Don't know how that happened. I have never unsubscribed from anyone. I have a couple in particular that I do not follow anymore but I still never unsubscribed from them. I have never pressed the unlike button either. If I am watching a video that I don't like, I go somewhere else.
@PeeksPeakHobbyHomestead2 жыл бұрын
@@wildbill23c Yeah, they come with hydraulic oil in them, but the manual says that you can run UDT2 or gear oil…
@PeeksPeakHobbyHomestead2 жыл бұрын
@@tractortalkwithgary1271 I am with you on the unsubscribing and dislikes. That is weird that the system would have unsubscribed you from OIMNG…
@robertjeffery61002 жыл бұрын
I have a a B2410 600 plus hours used everyday The thing is bulletproof
@PeeksPeakHobbyHomestead2 жыл бұрын
Nice! You can’t beat them!
@JustCaidsDayFarm2 жыл бұрын
I have a B series Kubota and have the same problem with the torn boot. From what I understand it is very common on these tractors. I tried to get a replacement, but Kubota doesn't sell just the boot. They wanted me to buy the whole rod assembly. If you find a good source for an aftermarket replacement let me know. I would like to replace that before the Joint wears out. But I absolutely love my Kubota!
@PeeksPeakHobbyHomestead2 жыл бұрын
I haven’t started my search for the tie rod boot, but I’ll keep you posted. That is silly that they wouldn’t sell the boot separately. 🤷🏼♂️
@JustCaidsDayFarm2 жыл бұрын
@@PeeksPeakHobbyHomestead They guy at the parts counter said that they used to sell them separately but stopped. I don't understand it but was not happy when they told that. Good luck with the search.
@wildbill23c2 жыл бұрын
The last revision of the BX does come with different boots than the previous models...so I'd buy the newer rods with the new style boots that supposedly are less prone to the failures reported by many.
@danstevens22042 жыл бұрын
@@JustCaidsDayFarm same here in Aus. He is correct. If you have a bare-co or sparex supplier there a bare-co part number B3302 or equivalent will get you out of trouble.
@Neil-nu4lf2 күн бұрын
Just bought a used 1 not happy u start it she shakes like hell
@ablam8 Жыл бұрын
Just used my new 2380 for 1/2 hour moving gravel and the bucket wont dump or come back up. Loader goes up and down. Is that valve system , all 4 in 1, fixable, or should be replaced? The dealer is picking it up today. Has anyone had problems with the hydraulics?
@PeeksPeakHobbyHomestead Жыл бұрын
I don’t know the answer to that question, but I have not had any issues with my hydraulics. I did have a linkage disconnect on my backhoe that I just reinstalled with loctite. Hopefully yours ends up being a simple fix and you get it back soon!
@ablam8 Жыл бұрын
@@PeeksPeakHobbyHomestead Thanks Kentucky, enjoy your show. I am from BC, Canada. 5 miles from Idaho border.
@howardmiller4241 Жыл бұрын
I changed my front tires out 1 year after buying it
I love it how every single Kubota video I've watched plays bluegrass ... YEeee HA!
@PeeksPeakHobbyHomestead Жыл бұрын
You can’t beat bluegrass!
@ron9928 Жыл бұрын
@@PeeksPeakHobbyHomestead What is that song you play in the intro, tried to shazam it but it doesn't recognize it.
@PeeksPeakHobbyHomestead Жыл бұрын
@@ron9928 It’s actually a song I wrote back when I played with a little bluegrass band. I called it “Little Five Mile”. We were never big enough to actually release it. Lol
@KUBBI7488 Жыл бұрын
Nice tractor I wish it would be a bit bigger
@PeeksPeakHobbyHomestead Жыл бұрын
I was completely satisfied for over 2 years, but I have gotten to where I overwork it some now and I broke my diff lock. I may be wanting something bigger in the future. It’s a great little machine though!
@michaelg4931 Жыл бұрын
170 hours for the whole year...🤨 I'm planning on putting that on in less than 2 months after the dealer delivers it in a week or two. 😉
@PeeksPeakHobbyHomestead Жыл бұрын
Lol. That would be 2,000 hours in a year. That’s a full time job! Would t be such a bad job. 😊 We just hit 500 hours in just over 3 years.
@michaelg4931 Жыл бұрын
@@PeeksPeakHobbyHomestead I've had estimates for the work to be done around the place and they've been around $60-$70 thousand so I figured it'd be better just to buy a piece of equipment to do the jobs. I'd have went bigger but then there'd be no way the woman would get in the saddle. I don't drink beer and she makes horrible sandwiches soooo.... 😉
@williamwood4921 Жыл бұрын
My bx23s has serious fuel delivery issues
@PeeksPeakHobbyHomestead Жыл бұрын
Interesting. That’s something I’ve not had any issues with. I changed fuel filters one time in 450 hours. Hope you get it lined out!
@user-jl7nl6ws4e Жыл бұрын
It seems that some parts of this tractor are made in China, and not in Japan
@dontriplett51322 жыл бұрын
R U Really going to eat Oreo
@PeeksPeakHobbyHomestead2 жыл бұрын
Well…😊🐖🥓
@dontriplett51322 жыл бұрын
@@PeeksPeakHobbyHomestead before u know it u will be eating chuck & patty.