So informative! Can’t stop watching. I’ll be sending mine over as soon as I get everything

Beautiful work! Thank you!

Brother!! Awesome stuff she looks amazing…..what you guys and DSC gun works DSX conversation are doing is making life hard to choose what chocolate 🍫 daddy wants for Xmas. That V8 port must run. I need that mag released please. TY

Everyone complains about MIM parts in 2011, but they don't complain about the same MIM parts being used on Glocks, Sigs, etc. There's absolutely nothing wrong with MIM parts, they're 95% just as strong as metal. IMO, if a MIM part goes wrong, breaks, etc then replace it with EGW or Extreme Engineering. My gunsmith did a complete trigger job, tuned the extractor, polished and revamped the feed ramp, also, tuned the entire firearm and I have yet to experience "ANY" reliability issues or cause for concerns. If and when any part breaks or malfunctions, then I will change for "better" parts...

This particular Prodigy/SA product was my first introduction into the "2011" world. As stated in the video I'm no expert, I saw an amazing opportunity with this platform and wanted to make it unique without breaking the bank. I can't say enough about the quality of work, and the constant communication. I notified Scott last week that it was running perfectly...yet I received a call today to follow up if I had more rounds through it and any issues. I appreciate that, he had no reason to call. Quick comment, it's running with zero issues! Thanks Scott. We will do business again. BTW if anyone wants to reach out directly to me so I can further explain, I'm here. I'd love to share my experience. Thanks!

Hey I was thinking about getting some work done on my prodigy and you’re Channel is spot on. I like the way you explain everything step by step. It’s appreciated. I have a question if that’s ok. You said that you put an 8lb recoil spring in this prodigy. Wouldn’t that be too weak to properly push the slide back when cycling? What lb mainspring did you change it to in the egw internals kit?

Like the video. Question were can I find the slide release that is used on this prodigy.

I’d not be surprised, since they offer the Springfield Hellcat as well as Glocks in addition to Berettas - if Langdon Tactical gets into performance tuned Prodigy guns Seems there’s a good business opportunity for tuning this platform

Beautiful job

What is your lead time on getting a pistol just like this done? I just got the 4.25 Prodigy.

Love your work thinking about having some work done to my prodigy 4.25

Do you have an approximate timeline for when you will offer a few completed with these type of upgrades and how will we know when they are available?

What kind of extended slide lock is that?

Okay Skip on the buffer , small plastic part, can you run it if one removes it from gun , always had problems with them when I used them in a 1911 ?

how do the ports affect the rifling?

how much would you charge for v8 ported for prodigy 5 inch?

How do you treat the screws that hold the optics plate ?? Mine loosens every 300 rounds ........

How much would an internals swap would cost just to get it reliable ?

Bro let's gooooooooo

I just got the 4 1/4 and it’s one of the nicest pistols I ever shot I am super pleased with it but now I’m thinking “ it can be better ?“ I am intrigued so I subed to your channel

Can you cerakote the egw hammer even though they say it voids the warranty?

Where are you located? How long would a that trigger job cost parts and labor for that build(without the porting

Nice work! I'm looking forward to seeing how it shoots or any thoughts you might have on the optic. 👍

Looking to have that V8 porting done to my Bul Armory 4.25" SAS ll, do you do that?? If you mentioned it in the video and I missed it, my apologies.

The beasty S tattoo hard asf

What brand slide release is that?

What extended release is that?

When you spend enough money upgrading you Prodigy to the point its getting in staccto price territory then why not just get a Bul or Staccato ?

Is it the EGW ignition kit?

Skip looking good

Is there a parts list ?

Total price for that exact package?

how does it shoot

Would love to purchase the ports for my 4.25 prodigy as well as your recoil kit good sir

I’m interested in building a prodigy, where can I find info on cost and procedure.

Hey man I have a 4.25 inch prodigy. I’d love to have it ported just like that. I also may be interested in your recoil kit!! Pleaseee

I can’t wait for mine to come back!

How much to do all that?

like the extended slide release

Definitely do it....if it performs.

I’d like to get you to work on my 5” prodigy. How can we make that happen?

Could you list which EGW parts you used ? Couldn’t find anything that made me feel like it would fit in my own prodigy…

I need the atlas trigger and the egw internals!!

That’s sweet

where did you find a 8lb commander spring, cant seem to find any

Dang skip I would have bought mine from you

What is the price range with all those upgrades not including the optic ?

I’d like to have you port my prodigy but don’t know how to contact you

Looking to upgrade my prodigy, needs some work?

If I were to send you my prodigy, what’s the wait time and cost for this exact setup? Gun looks great with those ports and I bet shoots even better. Great work

Where's the hellcat skip

no shade because you're making these guns better but I've been seeing DPO Staccato going for $1900-2100.. which is a few hundo more than the new Prodigy.. unless you can them them for $1200ish, seems like folk should just save up another month or two for a US made solution :D

I'd be interested in a ported 5" Progidy along with internals and recoil kit

I would like the five inch Prodigy ported and gone over by you. And you keep it till I pay $100 a week till it and your work is paid in full.

hi, i liked the video, i also clicked like.

Hey skip, I'm looking into getting my prodigy v8 ported and I'm dying to get the atlas shielded safety (single side) and potentially the atlas slide release as well. Anyway I could reach out for a quote on this?

Hey, Skip V8 Port or DSX Conversion. Price does not matter. Which one would you suggest?

Sounds like with all the money you are putting in the prodigy that you can get a stock Staccato.

I wound if SA would ever private label the prodigy so gun smiths can offer a custom affordable double stack to the masses

U give lifetime warranty after mods to slide & barrel Cutting slide and barrel would void manufacturer warranty

Yes. MIM parts can stick to polymer striker fired guns.. good for you, but a DS 1911 can shut the front door when it comes to internals. Thanks to EGW, gut the crappy Mims and get her done. I love my Staccato P among my 1911s like WC and Dan Wesson. CZ also say stfu to mim part lovers. It's all about real steel. Even some titanium hookups.

What’s lead time on a build like this?

hey have you experienced hot burning powder residue blown back to you or felling onto you for ported barrels? I recently tried ported barrel for Shadow 2 and it was horrible.

Can't sell the work without demos man

I'm thinking about buying this gun, but at $1500, how much more would it cost to change the trigger, internals, and smoother slide action?

Now you havr added something else to my list to do

Ok what's the damage to the wallet 😕 I just paid 1600 for mine.. and it's not fancy..yet

What's the build time and price tag please sir?

🗣️Ended his career at the 3:23 mark ⚰️🪦

who did the porting

I need this done to mine . Let's talk

Nice work!! Where are you guys out of?

Glock 43x?

You spend more money vs Staccato 😂😂😂😂 $1499 just for the gun not including extra parts plus porting same price as c2 or Cs. I got one my self with v8. Nice gun but definitely not a Staccato

He said go to the site, what’s the site?

권총. 파시죠. 한국

After the price of this ,optics ,internals,trigger and porting you could have had a staccato that already has all of this done besides the optic.Lol people kill me. It would be a different story if the prodigy didn't come defective from the factory.You almost have to upgrade all the parts so it works.! Hole in the water.

ρяσмσѕм 🤪

That is an expensive pice of junk

Hey man I have a 4.25 inch prodigy. I’d love to have it ported just like that. I also may be interested in your recoil kit!! Pleaseee