No video
Which Impact Driver Bit is Best? Let's find out! Phillips #2 Showdown
Рет қаралды 4,961,803
Күн бұрынPhillips #2 impact driver bits tested: Milwaukee Shockwave, DeWalt, Makita, Bauer, Bosch, Hercules, Harbor Freight Warrior, Bosch, Wiha, and Irwin. Driver bit "grip" or twisting force required to cause cam out compared to driver bit wear after driving 100 drywall screws into a pressure treated 4x4s. Driver bits tested for metal hardness, twisting force required for cam out after use, and twisting force required to break the driver bit.
Products Tested In This Video (in no particular order):
Irwin: amzn.to/3l5Wnr2
Wiha: amzn.to/2FJ9VbL
Makita Gold: amzn.to/3lf2E3Z
Milwaukee Shockwave: amzn.to/3j3Xh5u
DeWalt: amzn.to/32hm2UW
Bosch: amzn.to/2YiICvt
Hercules: bit.ly/32iXtqK
Bauer: bit.ly/3j4pyJq
Harbor Freight Warrior: bit.ly/2Yr75yO
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/31aince
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC
@ProjectFarm 4 жыл бұрын
I never dreamed the channel would grow to 1 million subscribers. Thank you all very much for subscribing. You are making a huge, positive impact by helping me select products to test, advising on better test methods, and coming up with video ideas that will help a lot of people. Thanks again and best regards, Todd Products Tested In This Video (in no particular order): Irwin: amzn.to/3l5Wnr2 Wiha: amzn.to/2FJ9VbL Makita Gold: amzn.to/3lf2E3Z Milwaukee Shockwave: amzn.to/3j3Xh5u DeWalt: amzn.to/32hm2UW Bosch: amzn.to/2YiICvt Hercules: bit.ly/32iXtqK Bauer: bit.ly/3j4pyJq Harbor Freight Warrior: bit.ly/2Yr75yO
@korbinvandereyken7311 4 жыл бұрын
@project farm Test twitch bit is the best!
@jasonallen7091 4 жыл бұрын
I've been subscribed since the beginning. Always knew you'd make it big when I watched the seafoam video. You've given me lots of great information over the years. Thank you!
@ralphkestay 4 жыл бұрын
You owe us nothing ! You already go above and beyond with the amazing videos ! Proud to be apart of the million subs!
@Dipncamo 4 жыл бұрын
Need to test out the new rigid tools, do a drill test on some. I know the impacts and drivers are expensive though. But my top 3 impacts are rigid, milwaukee and makita and that goes for any tools in general. Unless it's hand tools I'll get se cheap craftsman stuff or kobalt just for the lifetime warranty. Enjoy the videos I've watched every single one, life long subscriber 🤙🤙
@JoshuaMuse 4 жыл бұрын
Yes I just see you've reached that. WOW I was in here around 32K. CONGRATS!
@K3NnY_G 4 жыл бұрын
The sheer amount of labour this guy does for us just to deliver accurate and concise data. Thanks as always for the hard, and constant work.
@caseytbss 4 жыл бұрын
K3NnY_G thats why he gets millions of views!!!! Watch some of the oldest videos when you get time. It pretty damn cool to see how far he has came with videos and edits! I have been subscribed for long time!
@stevethea5250 4 жыл бұрын
@@caseytbss BUT WHAT IS AN IMPACT DRIVER? AND WHYS IT CALLED IMPACCT?
@joshuasutton2163 4 жыл бұрын
Steve Thea An impact driver is a tool that uses a rotational hammering action to greatly increase torque. This action produces torque in very strong, short bursts, as opposed to a drill driver which produces continuous torque.
@stevethea5250 4 жыл бұрын
@@joshuasutton2163 whys it impact
@bahionic 4 жыл бұрын
Imagine a bolt that won't move, put a wrench on it and hit the wrench with a hammer! = impact
@elguapo3527 3 жыл бұрын
Your behind the scenes work: driving to buy wood, screws, material, etc., getting in line, paying, loading, unloading-for each project is appreciated. And drilling 1000 screws! Just a huge thank you. I taught tech ed classes and I know the prep involved. Thank you for answering questions about tools and materials I’ve had for years.
@ProjectFarm 3 жыл бұрын
You are welcome!
@RebeccaQueen-ti1bk 7 ай бұрын
Allah is one God God is Allah Allah has 99 names Allah is almighty
@RebeccaQueen-ti1bk 7 ай бұрын
@@ProjectFarmfear Allah
@hamzaahmad97 6 ай бұрын
@@RebeccaQueen-ti1bk ameen
@MarioGoatse 4 ай бұрын
@@RebeccaQueen-ti1bkAllah's wife was a child
@thardyryll 2 жыл бұрын
February 2022 update: At some point Milwaukee changed its packaging to claim “up to 30x life” instead of “50x.” I wouldn’t be the least bit surprised if Todd’s work here was a factor. Gotta love that.
@riba2233 2 жыл бұрын
Nice. I feel if they are exaggerating they should have written up to 1000x life lol
@alexanderdark6864 2 жыл бұрын
I can't imagine anyone being fooled by such extravagant claims anyway. I don't know why they even think that's good marketing. Still though, Milwaukee is lookin' real good right now.
@Xxmeca421xX Жыл бұрын
The goofy zone is just a piece of plastic to hide the narrow metal too lol
@RebeccaQueen-ti1bk 7 ай бұрын
@@Xxmeca421xXAllah is one God God is Allah Allah has 99 names Allah is almighty
@RebeccaQueen-ti1bk 7 ай бұрын
@@alexanderdark6864Jesus was not killed nor Jesus was crucified
@uswee 2 жыл бұрын
I have been an industrial mechanic for almost 30 years. I have seen and used lots of tools and techniques. I always look forward to your reviews. You have never let me down. THANK YOU.
@phoenixfireclusterbomb 2 жыл бұрын
Soooooo, what do you think is best phillips bit!!!?
@uswee 2 жыл бұрын
@@phoenixfireclusterbomb The one that fits best. I have had good luck with Milwaukee and Dewalt.
@houtworm001 4 жыл бұрын
This is how EVERY review should be. Straight to the point, just the actual facts, and honest. 👌
@ProjectFarm 4 жыл бұрын
Thanks so much!
@Czechbound 4 жыл бұрын
Hear Hear ! That was indeed excellent ! He's like the Athlean X Channel for fitness : good facts, no BS
@ratchetwise440 Жыл бұрын
And the replies should be exactly what he had asked for at the eng of the video Makita Gold, Milwaukee close tie
@SomebodyYouKnew 4 жыл бұрын
Hey KZfaq THIS GUY NEEDS PAID MORE!! He never does sponsors like these other sell out youtubers and he works so damn hard!!
@BloodSprite-tan 4 жыл бұрын
hey you see his Patreon link. that's what that's for. if you can support the channel go ahead.
@brocksdaddy081910 4 жыл бұрын
Him and AVE are supported by patreon and KZfaq adds so they are not beholden to sponsors and we get a truly un-biased review.
@erosennin4444 4 жыл бұрын
I thinks he's doing good for himself. He's really close to that silver KZfaq trophy at a million
@noidle22 4 жыл бұрын
I got 5 ads on this 12 minute video. He's alright.
@ShutterMAX 4 жыл бұрын
Hey, love the videos. Can you do a comparison between Robertson and Phillips
@thegodofwar94 6 ай бұрын
Bruh the extent to which you go for your tests is insane. We all appreciate your work man 🙏
@ProjectFarm 6 ай бұрын
Thanks!
@rodwilkins1614 4 ай бұрын
Bruh? Wow, your down with the kids aincha?
@Luke_735 Жыл бұрын
Thank you for testing multiple Harbor Freight brands! Many of us are just humble DIY/enthusiasts and don't need the absolute best, so budget focus is key. Knowing how the various HF brands compare is super important.
@ProjectFarm Жыл бұрын
Thanks for sharing.
@dmac1259 Жыл бұрын
If you dont want to pay for big name brands then definitely stick with harbor freight and stay away from heart. I used to buy heart bits because I live really close to a Walmart but I didn't live close to a hardware store and I broke so many of those impact rated heart bits it's not even funny. I will tell you though Milwaukee bits are worth it they will last far longer than any budget bit in my experiance.
@nicwelch Жыл бұрын
@@dmac1259I bought a four pack of Hart bits to match my impact and I have to say they were great for me. Though I do have to say that for a little more money the Milwaukee bits really cannot be beat!
@RebeccaQueen-ti1bk 7 ай бұрын
@@nicwelchAllah is one God God is Allah Allah has 99 names Allah is almighty
@RebeccaQueen-ti1bk 7 ай бұрын
@@dmac1259fear Allah
@rkgaustin9043 4 жыл бұрын
Seriously, there should be a "rated outstanding by Project Farm" sticker on all the best products. It's the only recommendation I trust!
@redsite001 4 жыл бұрын
On the product packaging it should say "Tested Approved by Project Farm"
@dank9288639 4 жыл бұрын
Serious shit tho lol, I come here before I buy anything tool related and oils etc
@jeffreymichael5404 4 жыл бұрын
100%!
@randymathews3348 4 жыл бұрын
Or AvE
@tracewallace23 4 жыл бұрын
@@randymathews3348 not as scientific, but a lot more humor. I'm staying away from his vise😉🤣🤣
@dmanhd143 4 жыл бұрын
Project farm’s videos are the ones where you think. “No, I don’t need to know this.” But when you watch it you’re like, “Wow, I actually learned something valuable today”...
@eugenetswong 4 жыл бұрын
Yes, exactly. My favourite is the recent wall anchor video. I never felt comfortable installing them, since I don-t expect them to last long, and since I expect them make the wall worse. His video provided such a broad spectrum of results, that I felt that I could choose a product wisely for my needs.
@fred_e 4 жыл бұрын
@@eugenetswong This channel honestly has the greatest value to humanity in all of KZfaq.
@eugenetswong 4 жыл бұрын
@@fred_e that's a great way of saying it. :)
@ProjectFarm 4 жыл бұрын
Thanks so much!
@Anagonwolf Жыл бұрын
Gotta say, after years of real life experience, I've always gone with Milwaukee bits for Phillips and Torx bits, along with the socket adapters. I was afraid it might have just been brand loyalty at first, but the performance was there. Your lab testing conditions coincide with my experience. Thanks for the effort you put into this video!
@RebeccaQueen-ti1bk 7 ай бұрын
Allah is one God God is Allah Allah has 99 names Allah is almighty
@chilltrip393 7 ай бұрын
Hey man...there is a company in Germany named Würth and I have been using their screws, blades, driver and drill bits, grinding and cutting wheels for 13 years now and I also tried EVERY SINGLE bit, wheel, blade and screw on the market in Europe and NONE of them come even close to Würth. If you are not from Europe you should definitely need to try anything they offer. Every bit they have lasts me for very very long time (having in mind I use them 6 days of the week) and it is worth every single cent you spend on it.
@RebeccaQueen-ti1bk 7 ай бұрын
@@chilltrip393 who is your lord grave first question
@chilltrip393 7 ай бұрын
@@RebeccaQueen-ti1bk I don't have a lord. I am human.
@dickdastardly5534 3 жыл бұрын
Your channel has grown so well because the topics and testing you cover are first class and impartial, you are doing the public a great service sir, thank you and keep it coming 👍🏻🏴
@FNGstationtwentyeigh 3 жыл бұрын
I most definitely appreciate the effort and seemingly unbiased evaluation you make on each and every product reviewed..
@ProjectFarm 3 жыл бұрын
Thanks so much!
@Adviceblock 3 жыл бұрын
Agreed!
@blueboywonder9353 3 жыл бұрын
No kidding
@SlideEverything 3 жыл бұрын
I don't think he is sponsored so he can say whatever he wants about them😂😂😂
@didarfarage7129 4 жыл бұрын
"honey what are you watching," "some guy driving 600 screws into wood"
@mikeyeyes7 4 жыл бұрын
🤣🤣🤣
@ProjectFarm 4 жыл бұрын
lol Thanks for watching.
@kilianortmann9979 4 жыл бұрын
I like work. I could watch it all day.
@ElGalIo2 4 жыл бұрын
Didar Farage 🤣
@MichaelRogersJesusrules 4 жыл бұрын
lol.good one :)
@Finksta951 Жыл бұрын
I think this may be the only channel left on youtube that has not sold out. I've never felt that this guy has had any bias on any of his tests against brands. If I am looking for pretty much anything and I find my self left with more options then time I will look and see if there is a project farm video first. Thanks for all the hard work and great videos.
@ProjectFarm Жыл бұрын
Thanks and you are welcome!
@greer776611 2 жыл бұрын
I always buy the cheapest impact bits- but I brake them too often! I'm very thankful you have these tests- helps provide the info we all need to find the quality products we can afford.
@ProjectFarm 2 жыл бұрын
Thanks for sharing.
@djjazzyjeff1232 4 жыл бұрын
The logical next step, Torx (star) bits! I'd love to see a test on those since I steer clear of Phillips heads generally, if it's practical to use Torx I always will!
@brodriguez11000 4 жыл бұрын
For consistency in driving. Only thing for really tough wood is hex head.
@djjazzyjeff1232 4 жыл бұрын
@@brodriguez11000 For my trade (weatherization) I find that I am always upsidedown twisted around reaching over one thing and under something else trying to get a screw into something in an attic or a crawl space stretching as far as I can, so nice even pressure isn't really possible in most real-world situations, so I always go Torx because if you can get the bit on the head, it'll drive that baby in. Why is rarely the case with a Phillips head, often it'll round out the head of the screw and damage the crap out of your bit, making the next screws even harder to drive in.
@TheSzalkowski 4 жыл бұрын
I agree, would be interested to see if the brand results are comparable. Add in Norske bits, I have heard good things about them
@kameljoe21 4 жыл бұрын
Torx, hex, square and the 3 sided square are far better than Phillips. Though I steer clear of most torx screws and bits as I tend to snap them more often than not.
@Xanthopteryx 4 жыл бұрын
Yes, WHO in their right mind uses Phillips?! At least Pozidriv is a minimum nowadays.
@CTw0H5OH 4 жыл бұрын
I'd like to see a comparison of the different types of screw types. I think the Robertson screw is the best as I've never stripped one.
@ProjectFarm 4 жыл бұрын
I'll check back to see how many likes this suggestion receives and hoping viewers will suggest brands they want tested. 100% of the ideas and brands tested are from viewer's recommendations. Thank you!
@user-zz8ln3uh5x 4 жыл бұрын
I'd also like to see that. I think it'd be informative to include varieties like GRK's star-drive and Spax's T-Star Plus.
@JoeUrbanYYC 4 жыл бұрын
Yep I'd be very curious of Robertson vs Torx along with any cost differences between screws of those bit type.
@boots7859 4 жыл бұрын
@@JoeUrbanYYC I'll Fourth that. Robertson being square seems like it should be exceptional.
@diarmuid858 4 жыл бұрын
Ya I’d love to see pozidriv too
@jimjacobs5825 2 жыл бұрын
I love Wiha bits. They’ve been the best for long jobs by far and as far as I’m concerned, the extra work they do is worth the price difference.
@ProjectFarm 2 жыл бұрын
Thanks for the feedback.
@i_know_youre_right_but Жыл бұрын
Just wish they did larger sets like every other brand.
@paulkoby2241 Жыл бұрын
I agree with the other commenters that your test seem to be honest and straight forward. The test also supply relevant information. Thank you for your efforts.
@ProjectFarm Жыл бұрын
Thanks and you are welcome!
@NeverSnows 4 жыл бұрын
Can we take a minute to appreciate the effort that was put on the making of this video?
@ProjectFarm 4 жыл бұрын
Thanks so much!
@Sc0rphionx 4 жыл бұрын
No we can't.
@huntzkush 4 жыл бұрын
Must've been exhausting lol
@arekthekingsecondaryaccoun4208 4 жыл бұрын
Never Snows yeah but I'm not liking ur comment
@NeverSnows 4 жыл бұрын
@@arekthekingsecondaryaccoun4208 never asked LMAO
@TheThatoneguy12121 3 жыл бұрын
This man is literally The Scientific Method for tools and hardware! Absolutely applaud the enormous amount of effort you put into these videos!
@ProjectFarm 3 жыл бұрын
Thanks!
@ck5575 Жыл бұрын
new nickname; 'The new Science Guy'... TY!!😁
@RebeccaQueen-ti1bk 7 ай бұрын
Allah is one God God is Allah Allah has 99 names Allah is almighty
@RebeccaQueen-ti1bk 7 ай бұрын
@@ProjectFarmdog not allowed ect
@RebeccaQueen-ti1bk 7 ай бұрын
@@ck5575don't die as a disbeliever
@andrewcrossman2165 Жыл бұрын
Im an electrician, ive been using the same Milwaukee impact bit for five months, used every day all day, still going.
@ProjectFarm Жыл бұрын
Nice!
@RebeccaQueen-ti1bk 7 ай бұрын
Trade interest not allowed
@RebeccaQueen-ti1bk 7 ай бұрын
@@ProjectFarmsuicide not allowed
@jorgeo1492 Ай бұрын
Skipping your meds is not allowed @@RebeccaQueen-ti1bk
@UnlimitedPossibilities345 2 жыл бұрын
My personal observation has been that the Milwaukee brand tips last the longest. Great to see some actual side by side scientific comparisons to back it up. Thanks for all your efforts! Great video!
@ProjectFarm 2 жыл бұрын
Thanks and you are welcome!
@stephenparchewski1998 Жыл бұрын
I do agree…not just because I’m a Milwaukee fan, but they are good bits. The only exception are Robertson (SQ2) impact driver bits. Don’t ask me why, but the best ones I have ever used have been Dewalt ones. When they grip the bit, it actually takes some effort to get the bit out of the screw.
@RebeccaQueen-ti1bk 7 ай бұрын
@@stephenparchewski1998trade internet not allowed
@RebeccaQueen-ti1bk 7 ай бұрын
@@ProjectFarmsuicide not allowed
@RebeccaQueen-ti1bk 7 ай бұрын
Dog not allowed ect
@chevyon37s 4 жыл бұрын
You should sell “Project Farm approved” stickers/ seals of approval to fun some more fun testing....
@hillbillyohio513 4 жыл бұрын
Sign me up for four please!! Great idea bro I would be proud to put a Project Farm sticker on my truck and tool box.
@erikdempsey8019 4 жыл бұрын
@@hillbillyohio513 I agree.. I would proudly put a Project Farm sticker... especially if it would help support his channel...
@eugeneshealthproject 4 жыл бұрын
If you go that far you may have to list your test for traceability to the National Bureau of standards and your testing procedures must be repeatable with identical results. Your torque wrenches must be calibrated and certified calibration to the National Bureau of standards. Everything must be standardized to maintain credibility. It now becomes a great Responsibility and Honesty because one slip up and you can loose all credibility. I wish him good fortune on whatever route he takes. I hope he becomes the best testing agency in the world.
@shane6023 4 жыл бұрын
ok so i'm 1 minute into the video and i'm just gonna hve to stop it there and say the amount of effort you put into all your videos is amazing. No other channels out there like it. 10/10 love your content
@ProjectFarm 4 жыл бұрын
Wow, thanks!
@matthewmccalister5594 4 жыл бұрын
I agree 100%! I love the tests he comes up with and how methodical the whole process always is.
@jaystepien921 4 жыл бұрын
I'm impressed as well. Very professional!
@jacobbryan498 4 жыл бұрын
@@jaystepien921 Haha, I literally just commented the same thing. Such a great KZfaq channel.
@wldtrak 8 ай бұрын
This man needs his own TV series.
@ProjectFarm 8 ай бұрын
Thanks!
@5714sqd 11 ай бұрын
I worked in the aviation industry for almost fifty years and screwdriver bits are important. There are two brands that are used frequently, Apex and Airtek. Both are very well made and last a long time. Both resist tip wear and stand up well to impact drivers. Aircraft use machine screws made to a high standard and demand a decent driver tip that resists cam out. I have been retired for many years but still use bits from my working days, a testament to their longevity.
@nathanclark2424 9 ай бұрын
Out of curiosity, are Philips the most common screw where you worked, or is it a different type? And so cam out is no longer useful to avoid over torquing?
@Mkruzer 4 жыл бұрын
Had a pack of Bosch they would consistently break at 1 per every 4 concrete screws. Changed over to Milwaukee and drove 8 more screws without one bit breaking. Sticking with Milwaukee.
@mustafanaik5866 4 жыл бұрын
I have worse. I gotta work with old black and Decker bits
@tjlabbee7856 4 жыл бұрын
Look up Robertson bits.
@randymathews3348 4 жыл бұрын
@@mustafanaik5866 no.. You don't
@mustafanaik5866 4 жыл бұрын
@@randymathews3348 the bits that come with the drill. What do you mean?
@randymathews3348 4 жыл бұрын
@@mustafanaik5866 you can buy better bits bro.. You run your saw w the blade it came w?
@GAZMANFOREVER 4 жыл бұрын
So the bits scratch at a level 6, with deeper grooves at a 7? *JerryRig has entered the chat*
@ProjectFarm 4 жыл бұрын
lol. Nice! He's got a great channel
@thatdude5104 4 жыл бұрын
@@ProjectFarm No, you have a great channel ;)
@mathewmantas 4 жыл бұрын
@@thatdude5104 No, They both have great channels! :D
@luukieboy886 4 жыл бұрын
Haha
@bignoseharry6561 4 жыл бұрын
Jerry Rigged ? Hmmn, is that sorta like "Jew'd Down" ? I bet there's not a site with that name on KZfaq.
@-QuickNick- 2 жыл бұрын
Worked with Milwaukee tools a few years ago in my last job, was impressed by how good the drillbit was, so I got myself an angle grinder, shock drillbit and shockwave bits. Just watched this to know if there's a brand even better than them, but as it seems I did nothing wrong and already went with the best. Good video, well done.
@ProjectFarm 2 жыл бұрын
Thanks and you are welcome!
@kevinlangley9644 2 жыл бұрын
For my personal use I've went with Makita but for my job ( maintenance director at a nursing home. You'd be surprised at the work we have to do. And believe it or not although the elderly can be very destructive its the employees that cause the most damage lol) I went with Milwaukee and i am very impressed with their products. I told my wife that when my Makitas finally die I'm going Milwaukee all the way. I've already bought a Milwaukee reciprocating saw, drill bits and a multitude of driver bits of all kinds. Even the razor knife and tape measure i bought have been very reliable. Just good quality. And I'm a very firm believer that in most things you get what you pay for. Although they're cheaper I've never had much luck with brands like Ryobi and the like. Only Ryobi piece I've got that has withstood the years is a table saw. Gotta admit it's been a trooper.
@GingrBreadMan 2 жыл бұрын
@@kevinlangley9644 lmfao I have a few thousand dollars easily into milwaukee but I keep around the cheapest tablesaw ryobi has and that thing has been impressive, mainly bought it because it was small and light for a table saw. I've had to do some modifications and repairs to keep it going but man for a cheap saw it's a champ.
@jethrowomber 4 жыл бұрын
The best bit, is the one I can find when I need it.
@craiggiese5037 4 жыл бұрын
Yes it is Haha
@MarantzSt153 4 жыл бұрын
*THIS*
@spookytowie7838 4 жыл бұрын
I can have a 100 of the Damn things and never can find one when I need it. 😆
@ArtzierzDJ 4 жыл бұрын
So true
@SteveReynold 4 жыл бұрын
For me that’s none ever.
@chauntikleer 4 жыл бұрын
"I never dreamed the channel would grow to 1 million subscribers." You got there by delivering high quality content with an understandable, no-nonsense/no-fluff delivery. Much of it is applicable to me - a fairly handy guy that likes to do a lot myself - and I really enjoy your videos. Thanks for helping us get thorough the coronavirus lockdown. I strongly prefer Torx and square drives. If you haven't already, I'd love to see a comparison of the performance of the common drive profiles.
@deadchannel991 4 жыл бұрын
Oh same here. More surface area=substantial difference in grip.
@duramax78 4 жыл бұрын
Yes please do a Robertson comparison.
@duramax78 4 жыл бұрын
You ever see AVE videos, check him out very awesome channel also.
@geothelameule 4 жыл бұрын
@@deadchannel991 friction does not depend on surface area, only on support reaction (ie how much you press on the thing) and on coefficient of friction between the two materials
@user-22- 2 жыл бұрын
Not many ladies here but despite doing mostly household repairs/projects, I don’t want to waste money on inferior products. Thanks for your work & here’s another sub! 👍🏼
@ProjectFarm 2 жыл бұрын
Thanks for watching and subscribing!
@Winters506 2 жыл бұрын
The thoroughness of this man’s channel and effort he puts into bringing the most non biased product performance and information is unprecedented. Such an exceptional channel to watch. I will not buy a tool without checking to see what his findings were first.
@ProjectFarm 2 жыл бұрын
Thanks for sharing.
@sorsorsor11 4 жыл бұрын
When I'm ready to find a wife I will employ this guy.
@kennethhicks2113 4 жыл бұрын
LOL! Dang, too late for me!
@CJ9007 4 жыл бұрын
He’ll find ya the best one
@swampratt36 4 жыл бұрын
Dammit man , y'all fellas just ain't right 🤣 but on that note , wish I had a set of mud grips made of it .😳👍😬
@pebblez_ 4 жыл бұрын
God damn
@megatrolltrollington 4 жыл бұрын
@You Wish I'm interested to see the results of this test.
@TheHolyFlapjack 4 жыл бұрын
I would just like to give a tip, when you’re using the impact gun as much as you are in this video, as a dewalt owner myself, I have had a few drills burn out and I could never figure out why. The problem was that when under heavy load (like this video) I was covering the air ports to cool the motor as it is spinning in order to apply downward force like anyone trying to make sure the but doesn’t slip off, and it caused the motor windings to heat up and short out. My tip to you would be to rest you’re hand on the very back of the drill and not block the air ports to allow your impact gun to cool and live a much longer life.
@bdragonseven 4 жыл бұрын
At work, my little Milwaukee impact heats up pretty badly when I'm holding it down. The air coming out of it can and has gotten so hot, it burns the hand that's being used to hold the bit in place. Imagine the grease Carnage going on inside the thing!
@dozer8065 4 жыл бұрын
Not really a tip more of common sense, but thanks for pointing that out, ive seen lots of people do this, i found out just by the heat my handfelt and put 2in2 together
@jesseserfling6807 4 жыл бұрын
I have a friend who is an old sheet rocker he has his corded drill that he uses always on to keep the fan moving air over the motor. He swears by it
@MrCellardoor7 4 жыл бұрын
jesse serfling Absolutely correct, keep the circular saw running a little longer before and after the cut too.
@bblwarrantydepartment981 4 жыл бұрын
The Holy Flapjack that’s why I love my makita vent on the side
@truthserum9157 2 жыл бұрын
Videos like this is why I keep watching your channel, in just over 12 minutes you can find out what’s taking me years to find out, that’s why I almost always use first Milwaukee, second Makita, third DeWalt.
@ProjectFarm 2 жыл бұрын
Thanks! Glad to hear!
@jrpena7857 2 жыл бұрын
I don’t know much but I’ll tell you one thing. I don’t spend a dollar on a single toll until I see you talk about it. And honestly all my tools perform very reliably. Your work is very appreciated. Please don’t ever stop
@ProjectFarm 2 жыл бұрын
Thanks so much!
@kevinwallace1499 4 жыл бұрын
This video really had an impact on my purchasing decision.
@jimdavis1566 4 жыл бұрын
Me too. I realize I've been screwing up.
@evertith 4 жыл бұрын
I see what you did there
@kevinkent6710 4 жыл бұрын
@@jimdavis1566 That is a bit sad.
@nofthet5548 4 жыл бұрын
can we please keep this thread going ?
@AudioHead809 4 жыл бұрын
NATH TAYLOR depends on the thread pitch
@SlipFitGarage 4 жыл бұрын
I've said it several times before, and I'll say it again.... the amount of effort you put into creating these videos is very imprssive. Nice work.... AGAIN!
@nickadamson6053 Жыл бұрын
I have not done the in depth testing you've done by any means. I have, although, over the last couple years used most of the bits you tested in my day-to-day work. The Milwaukee bits really are just this good. I bought a 15 pack of the 2-inch about 2 months ago and the first bit I put in my impact driver is still there. I'm just about to swap it out because of a couple of sloppy/awkward use moments with it. I work as a carpenter/handyman/furniture repairman.
@ProjectFarm Жыл бұрын
Thanks for sharing.
@lancewalker429 Жыл бұрын
I am extremely grateful for the work that you do. As these bits are sold in bulk and are often used the most on a job site, these tests have shown me how important it is to figure cost and longevity into my future purchases. I wish I had watched this video before buying a pack of Milwaukee bits (after leaving harbor freight), but at least I know I'll be able to save some money when I inevitably have to replace them. Thanks for the info and all of the work you have done and continue to do. I'll try to be more patient and let you find the best options for my future purchases. You've not led me wrong yet.
@ProjectFarm Жыл бұрын
Thanks!
@anonymoose6873 4 жыл бұрын
This had impacted my life and twist forced me to hit the like button
@ProjectFarm 4 жыл бұрын
lol. Nice play on words!
@LochyP 4 жыл бұрын
I was driven to subscribe
@Jako1987 4 жыл бұрын
Nice bit of information
@LochyP 4 жыл бұрын
Screw this, you win.
@tiagoguerreiro9567 4 жыл бұрын
Me to and I subscribe. Great contents. Almost 1M 💪
@jamnchips 4 жыл бұрын
Imagine explaining to the significant other why you have drilled ~1k screws into wood for 'no reason'. You, sir, are a legend
@ProjectFarm 4 жыл бұрын
Thanks!
@seanrussell4489 4 жыл бұрын
@@ProjectFarm It's modern art!
@dougjb7848 4 жыл бұрын
@Jam'N'Chips Either that or bat-crap crazy.
@HappyMemoryy Ай бұрын
There was a reason though. Testing :)
@n0madfernan257 2 жыл бұрын
i'd close my eyes and i will not wonder how this guy would still makes me watch a one stop tv shopping for hand tools. a diy person myself and i love this channel.
@ProjectFarm 2 жыл бұрын
Thanks!
@fredieeguevara4869 2 жыл бұрын
Your hard work in maintaining neutrality in your tests is very much appreciated. Something that I would love to see tested is windshield wipers. I live in a hot dry climate and find myself replacing them often and wandering if the more expensive brands are any better than the cheap ones.
@ProjectFarm 2 жыл бұрын
kzfaq.info/get/bejne/nZmDa9iVurmvpI0.html
@jcewl93 7 ай бұрын
My personal experience has shown that the cheapest silicone beam wiper blades off eBay last longer and perform better than the expensive blades from Walmart. I'm talking about a $12 per PAIR set of blades vs $60+ per pair!
@trig 4 жыл бұрын
I have found that grinding the first 1mm of the tip of my driver bits has reduced cam out considerably. I use mostly stainless steel screws, in oak, and the screw heads are not always as well formed as they should be. Removing that first mm ensures the lands of the driver bit seat properly. It works so well that I now do this with all my driver bits as soon as I buy a new box whether they are for driving stainless or standard steel screws.
@ProjectFarm 4 жыл бұрын
Great tip! Thank you
@1pcfred 4 жыл бұрын
Heh I thought I was the only one that ground Phillips bits. But yeah when they get worn out I'll regrind them and they do seem to work better than new then.
@mediocrates1937 4 жыл бұрын
This is a good tip, I do it as well. It makes the bits more like JIS bits (Japanese Imperial Standard) which are standard in Japan, and though they look nearly identical to Phillips #2 bits/screws, Japanese bits/screws are not designed to cam out. Their engineering philosophy insists that an engineer design a torque rating for every single fastener used on an item, whether it be an automobile or a kids toy. It's neither better nor worse, just a different philosophy than the U.S./the West...
@cadelfistro1824 4 жыл бұрын
you can buy grund down phillips bits, its called PH2G or PH2R. they are made for self tappers like you used!
@1pcfred 4 жыл бұрын
@@mediocrates1937 sure the "I" doesn't stand for Industrial? And yeah JIS does make a mess of things. I just love standards. There's so many to choose from!
@firecharger 4 жыл бұрын
America's favorite farmer scientist! You've found your calling in life.
@watcher13th 4 жыл бұрын
Scientist? LOL
@maximumfunk5484 4 жыл бұрын
watcher13th I mean he uses very controlled scientific method to do all f his videos. Making sure everything is constant and testing multiple variables but only one at a time.
@MrTexasdieselguy 4 жыл бұрын
He is very much a Michael Farady style of scientist.
@chrisbrowne4669 Жыл бұрын
100 screws is about 2 hours work if you are installing and screwing down at the same time.. I often drive thousands in a week. In my experience the quality of each brand changes from month to month, as do the screws used. I have used all these brands. Milwaukee bits are sometimes great, sometimes soft. Over the last 5 years I have found Bosch to be the most consistently hard and longest lasting.
@ProjectFarm Жыл бұрын
Thanks for sharing.
@floofsale Жыл бұрын
Well if ur saying its true that Bosch is consistent... What would say is the reason it did poorly in this dudes tests? Seems like they are not consistent then... Considering many brands outperformed them. I wonder if its a regional thing... Or source of purchase. For example buying home depot branded Bosch might be less quality versus someone who buys Bosch from the manufacturer as a contractor or something.. different metals per region..or company... Hmmm. Who knows.. but its interesting. Where do you purchase your Bosche bits from?
@johnputnam1440 Жыл бұрын
I’m always impressed with what you test and am often shocked with brands that seem to be popular. That being said, how about doing a video on padlock lubricant and outdoor padlock deicer? Thanks for what you do!!
@ProjectFarm Жыл бұрын
Thanks and you are welcome! Thanks for the suggestion.
@200130769 Жыл бұрын
I'd also be interested in a padlock lube video.
@RebeccaQueen-ti1bk 7 ай бұрын
Fear Allah
@RebeccaQueen-ti1bk 7 ай бұрын
@@ProjectFarmdon't die as a disbeliever
@RebeccaQueen-ti1bk 7 ай бұрын
@@200130769trade interest not allowed
@JoshTolbertUrbana 4 жыл бұрын
The Bauers seem like a surprisingly good bit for the money. Here's a suggestion: try different drive types. I'd love to see a similar comparison for square-drive/Robertson, Philips, JIS, Pozidriv, Torx, and hex/Allen. When building stuff I tend to gravitate towards square-drive, Torx, and hex, but I've been really impressed with JIS when I've encountered it on Japanese motorcycles. Thanks again for all of the work you do for these videos.
@SusWorkYT 4 жыл бұрын
I agree with you Josh
@ProjectFarm 4 жыл бұрын
Thanks for the video idea.
@bertgrau9246 4 жыл бұрын
@FoxRcng708 I like the torx bits best, less likely to jump out of the screw . I go out of my way when I need screws to get the torx and stay away from the Philips
@MrWalleye 4 жыл бұрын
We mostly use Robertson's up here north of the border. Would really like to see how they stand up.
@niels-173 4 жыл бұрын
Since i started using torx I never bought philips heads anymore, torx almost never slip out even using minor pressure
@Mast3rJed1_ 4 жыл бұрын
You're almost to 1,000,000 Subs! Almost exactly three years since your first upload, Congrats 👏 🎉
@ProjectFarm 4 жыл бұрын
Thanks for watching!
@johnd7564 3 жыл бұрын
First video of yours I've ever seen. But I've seen hundreds of others' reviews. You REALLY stand out for providing clear, objective data. Instant like and subscribe. Wow! I just noticed there are nearly 2M subscribers for this channel. Well-deserved, I'd say.
@ProjectFarm 3 жыл бұрын
Thanks for watching and subscribing!
@juliendillingham6257 2 жыл бұрын
10 brands, 4 tests, 12 minutes, clear data, fully unbiased etc... You can't ask for much more.
@wombatburrito5896 3 жыл бұрын
As a tradesman , I sincerely appreciate your work. It is absolutely priceless being able to know what product chooches best without having to do all the crap you go through. Gods bless you and the work you do brother . Thank you from a humble glazier
@markthompson5983 3 жыл бұрын
I see you watch AVE.
@cowboy41231 2 жыл бұрын
Aunties your uncle?
@Nelson-sr2bi 2 жыл бұрын
Men of culture
@Davis38 4 жыл бұрын
You are very dedicated on what you do, I think that you are the best testing channel there is on KZfaq! Thanks for the content you bring us.
@ProjectFarm 4 жыл бұрын
Thank you very much! The positive feedback means a lot!!
@WineScrounger 4 жыл бұрын
I’ve said it, but it bears repeating 👍
@NoWr2Run 4 жыл бұрын
DAMN RIGHT HE IS, TAKES A HELL OF A LOT OF TIME & THE STUFF HE COMES UP WITH TO DO TESTS ARE UNMATCHED. LOVE P. F.
@carlotodaro5052 7 ай бұрын
I'm not surprised how much you've grown. Excellent job and there's no way I can leave this site without subscribing. You put a lot of time, work and money into your reviews. I'll be checking out your reviews on drill bits and seeing what else I need to learn. thank you
@ProjectFarm 7 ай бұрын
Thanks for watching and subscribing.
@khandimahn9687 2 жыл бұрын
As someone who recently discovered the virtues of an impact driver over a drill, this is the exact content I need to make sure I'm getting the best value for my money.
@ethanstout8226 4 жыл бұрын
Bauer is next level. HF’s best kept secret. Cheapest and best of their “premium” brands.
@OneMouseGaming 4 жыл бұрын
I love my bauer drill/driver set , add in the LED light or two as they are a must. I really wish they sold a battery contact cover. I don't like having lipos sitting around with exposed contacts. I also got my compound sliding miter saw but i had to do a LOT of hand work and sanding to get the turntable and outfeed ledges to be level and true. That saw with my own zero clearance throat piece and my own DIY zero clearance fence. I had to put work into making the tool do what i wanted, + build a 3 foot infeed/outfeed table and tie it into the fence, but all the tools from HF that i have gotten have been champions. Even the belt/circle sander combo. I had to tweak the motors position to tension the belt, but adjustment is to be expected in any direct belt driven tool.
@johnboykin3128 4 жыл бұрын
I bought 2 for my last remodel, and owned a hammer drill for 3 years. Super tools
@delta34golf 4 жыл бұрын
So much awesomeness coming out of the Bauer line lately. Soon 5AH batteries.... maybe even 8AH batteries.. :D
@Industry-insider 4 жыл бұрын
I’ve tried most of them and makita gold are really the best all around, they don’t strip out too bad and they also don’t snap
@Anomaly188 4 жыл бұрын
It's not even their 'premium' brand. That's supposed to be Hercules. Bauer is their enthusiast semi-pro line.
@bocrocks 4 жыл бұрын
I use those Milwaukee bits every day at work, but i would love to see a comparison like this of the longer bits, like 3 and 6 inch
@satibel 4 жыл бұрын
Second that, seeing how the longest bits compare would be interesting, my guess is that they might actually last longer because the shaft flexes more.
@TheRebuilt1 2 жыл бұрын
Every time I watch his testing im amazed not at his findings but how I guy on a farm has better testing than companies with all these engineers and a plethora of resources/ Mad respect to this man.
@ProjectFarm 2 жыл бұрын
Thanks!
@snoopdogie187 2 жыл бұрын
I used the dewalt bits for awhile, which were great when I was using a 12v impact driver. Very little issues with them, and they didn't wear out that quickly. Now that I upgraded to a 20v impact driver, which has some power, the old dewalt bits shatter quickly, sometimes on the first use.
@ProjectFarm 2 жыл бұрын
Thanks for sharing.
@mikesummers2525 4 жыл бұрын
Can I send you a Father’s Day card because you’ve taught me more than mine.
@ProjectFarm 4 жыл бұрын
Glad the videos are helpful
@noahkladivo3752 4 жыл бұрын
I think thats a no...
@louis84100 4 жыл бұрын
@@noahkladivo3752 treated like a stepchild haha
@mharrison1325 4 жыл бұрын
Aww shut down. I'll be your dad if you need. My kids keep licking things when we're out places, I need at least one kid who's lower maintenance.
@jaywagner13 4 жыл бұрын
Lol
@cajunice3588 4 жыл бұрын
Dewalt would last us about 1 box of 3 1/2 screws since switching to milwaukee we are at 10 boxes and counting so for us it's a clear choice
@briankleinschmidt3664 2 жыл бұрын
I'm glad I invested in the Milwaukee bits, but they are hard as heck to get out of the box that holds them. I often have to use pliers to get them out.
@ProjectFarm 2 жыл бұрын
Thanks for the feedback.
@rambandagi1 2 жыл бұрын
If all could be as good as this guy in making reviews. No drama, No nonsense. Pure objective comparison. Thanks!
@ProjectFarm 2 жыл бұрын
You are welcome!
@Kurushineko 4 жыл бұрын
Scratches at level 6 with deeper grooves at level 7
@zubairejaz5188 4 жыл бұрын
😂
@warreschuurmans6462 4 жыл бұрын
Glass is glass, and glass breaks
@Dhdiebrhd 4 жыл бұрын
JerryRigEverthing
@bonob0123 4 жыл бұрын
corny
@chris4749 4 жыл бұрын
Thiago Moreira 😂😂
@reginogar1 5 ай бұрын
Let me tell you this, theres no reviewer so dedicated and hardworking like you man.
@ProjectFarm 5 ай бұрын
Thanks!
@evictioncarpentry2628 4 жыл бұрын
I've used about every bit in existence. All I've used the past two years are the Milwaukee 3 and 6 inch shockwave bits. They have the best fit/longevity in my experience.
@ProjectFarm 4 жыл бұрын
Great feedback! Thank you
@BrianSu 4 жыл бұрын
exactly!! The moment I saw a Milwaukee amongst the lot that he tested, I wondered what’s the point of the video then 😂😂
@trentonreese2713 4 жыл бұрын
as an electrician i use the milwaukee 6 inch bits almost exclusively in my bosch 12v impact. they last about 3 months with daily constant use and i usually only have to replace them because i lost it not because it stopped working good
@evictioncarpentry2628 4 жыл бұрын
@@trentonreese2713 That's half the problem - loosing them or someone borrowing it "for a second" and keeping it lol.
@charndeepsingh1617 2 жыл бұрын
I've got all Makita gear but those Milwaukee bits literally last forever and are a great fit, the one in my impact at the moment has had constant use for over a year and is still nice to use.
@ProjectFarm 2 жыл бұрын
Thanks for the feedback.
@dmac1259 Жыл бұрын
I've broken makita bits. I never managed to break a Milwaukee bit I just wore a few out from using them for so long.
@kmass77 Жыл бұрын
Have used many brands and landed on MIlwaukee based on its reliability and performance. Videos like this confirm the choice!
@ProjectFarm Жыл бұрын
Thanks for the feedback.
@dylanwilliams8182 4 жыл бұрын
I can’t imagine setting 1000 screws! Real commitment, great video!!
@ProjectFarm 4 жыл бұрын
lol. Yes, it took a while. Thank you
@kenhurley4441 4 жыл бұрын
@@ProjectFarm Did you hum the Beach Boys,,,,, Get a round Get a round I get a round while putting the screws in?
@armyofshea7941 4 жыл бұрын
“On the next Project Farm we test who makes the strongest Whiskey”...... then we see the M.E with a close up of his liver, “now that’s a lot of damage.”
@spicyF1 4 жыл бұрын
I would love for him to document his methodology for that test.lol
@e1woqf 4 жыл бұрын
🤣
@algalkin 4 жыл бұрын
Which whiskey can make you drunk faster? Which one's effect lasts longer?
@dadawesome784 4 жыл бұрын
@Project Farm- I’d offer my services to collaborate on this study.
@stanwooddave9758 4 жыл бұрын
I was taught it's Whiskey & Wild Women. So, if he needs a hand with some Wild Women, as a widower, I'd offer my service's. So he's not putting his life at risk from his wife. LOL
@bgrigg07 Жыл бұрын
I really like all your test videos. You don't waste time yakking about other stuff and get straight to the task at hand. No surprise that 2 yrs ago you were at 1M and now you're at 2.56M!
@ProjectFarm Жыл бұрын
Thanks!
@brandonfelix8116 2 жыл бұрын
No wera bits ?
@k5ryannc 4 жыл бұрын
You've made it to 1 million subscribers because you do a great job! Keep up the great work and content!
@ProjectFarm 4 жыл бұрын
Thanks! Will do!
@jahughchaffin6616 4 жыл бұрын
O
@jamdc2000 4 жыл бұрын
Shop teller: Why do you buy different brands? Me: Project Farm
@ProjectFarm 4 жыл бұрын
lol Thanks for the feedback.
@cameronbarbour2500 4 жыл бұрын
11:48
@darrylsjodin7184 2 жыл бұрын
I was shocked when I saw how many screws he had lined up! Thanks for sacrificing your shoulders and elbows!😀
@ProjectFarm 2 жыл бұрын
You are welcome!
@danielt8727 5 ай бұрын
Those tips at the end on how to make your bits last longer is just as much gold as the rest of the info. Thx for doing what you do well.
@ProjectFarm 5 ай бұрын
You are welcome!
@dough9950 4 жыл бұрын
I would love to see a comparison of different screw bit geometry, philips vs Robertson, torx , etc
@mattrinne 4 жыл бұрын
I second that emotion!
@ejwall 4 жыл бұрын
Yes!
@trendkilla254 4 жыл бұрын
I feel like torx is the best personally. Just a guess though.
@ianvaldivia1993 4 жыл бұрын
I will love to see that also
@OrlandoORC 4 жыл бұрын
Torx all the way.
@sasquatch5680 4 жыл бұрын
im always impressed of the skill and time you put in on these tests..WELL DONE
@ProjectFarm 4 жыл бұрын
Thank you very much!
@BlackfingerGarage 4 жыл бұрын
Agreed!
@Anonymous-it5jw 4 ай бұрын
Decades ago when I started working on fixing Japanese motorcycles and cars, I usually stripped the installed screws when using Philips bits made to USA specs. I later discovered that Japanese cross head screws are made to different, tighter specs(JIS or Japanese Industrial Standards), and you have to use drive bits made to JIS standards to avoid stripping screw heads and ruining the bits. If you ask your tool supplier, these JIS bits and screws are readily available.
@ProjectFarm 4 ай бұрын
Thanks for sharing.
@detroitboy65 Жыл бұрын
I have been using Milwaukee Shockwave bits for years. Simply, they are the best I have used in my 30 years of contracting! So well made are they that I have used one bit for as long as a 3 days before it starts camming-out! To get an idea about how much use that is, I drive about 2 pounds of screws per day (personally and about 10lbs for the entire crew) My entire crew uses Shockwaves and Milwaukee M18 impact drivers. we ALL love Milwaukee! Let me speak to their M18 tools too! I once dropped my impact Driver off a commercial roof, 44 feet onto a brick alley. It had only a scrape! and it still works fine to this day!
@ProjectFarm Жыл бұрын
Thanks for sharing.
@finnblackburn9583 4 жыл бұрын
Thanks for making these comparisons! I work as a mechanic and it always seems to throw the supply shops for a loop when I call them up and insist on specific brands for everything. Your reciprocating saw blade comparison introduced me to the Diablo brand and that really helped me out when I was working on equipment that I couldn't use torches around.
@ProjectFarm 4 жыл бұрын
I love it when the videos help viewers! It's a huge source of satisfaction and keeps me testing products!
@Omer-vs4fm 4 жыл бұрын
Easily one of the most useful and honest channels on KZfaq. Love how straightforward you are. Keep up the excellent work.
@ProjectFarm 4 жыл бұрын
I appreciate that!
@jasonpfister3629 Жыл бұрын
I use Milwaukee’s shockwave line of driver bits and have not been disappointed yet. From high torque applications to driving 100’s of 3” stainless deck screws, the bits I have seem to get lost or stolen before needing to be swapped out due to damage or breaking. I have a number of the shockwave cases of assortments of bits, but seem to use the 2 inch PH2 and T25 almost daily and have not broken one yet. Very impressed with the quality and it seems this test reflected that with the results.
@ProjectFarm Жыл бұрын
Thanks for sharing.
@Maintenance_Mark Жыл бұрын
I am currently redoing my old rotted deck on the house I just bought. The previous owner that built the deck used low-quality screws that rusted badly. I was using vice grips and a pry bar to remove the boards and screw is one by one. After watching this video I purchased a Philips DeWalt number 2 and used my impact and it has changed my life. The screws are actually coming out or at least the vast majority of them whereas before they weren't coming out at all. Before I started using the new dewalt bit and my impact I was using a drill with an old Phillips head I was only getting one or two out of 25 screws out. Now I'm getting them all out except one or two and if they don't come out they break which is fine too.
@ProjectFarm Жыл бұрын
Thanks for sharing.
@TheClearSight 3 жыл бұрын
for the normal average man you will never get a better testing channel on youtube than this. the amount of information and obversval data you get here is just insane.
@ProjectFarm 3 жыл бұрын
Thanks so much!
@exulan9570 4 жыл бұрын
5:34 scratches at a level 6 with deeper groves at a level 7
@nathanvaughn7744 4 жыл бұрын
Take my updoot
@FakeJeep 4 жыл бұрын
I see you're also a man of culture.
@andykay4554 4 жыл бұрын
"All we do is remove 1000 screws and your good to go"
@ProjectFarm 4 жыл бұрын
Thanks for the feedback.
@A-1ActionServices Жыл бұрын
I own a Locksmith Store, and like your test I've found and gotten the best results using the Milwaukee Shockwave. Use them EVERYDAY! So far so good. Enjoy your videos!!!
@ProjectFarm Жыл бұрын
Thanks!
@raphealwood4434 Жыл бұрын
I'm a fan of the Bauer brand.. I bought some just needing a quick replacement. And have noticed that as far as quality goes there well above the others. The way they grip to inside the screw is amazing!
@ProjectFarm Жыл бұрын
Thanks for the feedback.
@Fede_uyz 4 жыл бұрын
No nonsense, no fluff, no rambling. Straight info. I dont own any tools, i live in an apartment in a big city (being country that makes me feel gross) and dont own any tools other than the standard stuff to fix stuff around the house (screwdrivers, nails, hammer, etc) but i love your videos!
@knartfocker00 4 жыл бұрын
Dude, I love how succinct, scientific, relevant and usable every one of your videos is. Keep doing what you're doing.
@ProjectFarm 4 жыл бұрын
I appreciate that!
@MZ-mu6om 8 ай бұрын
Your absolute thorough commitment to this demonstration has me in the new SUB coloum. Many thanks and much appreciate your work.
@ProjectFarm 8 ай бұрын
Thanks for the sub!
@edwardsolyanko831 Жыл бұрын
My one and only. Best and favorite channel for tool reviews. Thank you so much for all the effort and time you put into these videos. From buying and driving to editing. Truly appreciated by me and by millions of others.
@ProjectFarm Жыл бұрын
Thank you very much!
@tristanschaper281 4 жыл бұрын
"Driving 1000 screws into a 2x4 puts tremendous load on the screws and the bit" -yeah, but what about the load on the Operator! How did you trigger finger and your hand and wrist feel after all of that? WOW! Job well done as always!!
@ProjectFarm 4 жыл бұрын
lol. Great point. The hand was numb for about 12 hours.
@mharrison1325 4 жыл бұрын
Anti-vibe gloves are a valuable asset for jobs like this, mowing/trimming etc.
@Denali_Rebel 4 жыл бұрын
Mike Harrison video on the best antivibe gloves haha
@catchara1496 4 жыл бұрын
*the vibes of this drill... they are not good.*
@michael931 4 жыл бұрын
I would say test anti-vibe gloves, but you would have to drive another 1000 screws....
@ttvalhercc2592 4 жыл бұрын
The amount of detail that goes into these quality vidoes is insane. Hats down man 🤣 precision experimenting 🔥🔥
@ProjectFarm 4 жыл бұрын
Appreciate it!
@justCarner 2 жыл бұрын
I LOVE the Makita bits both gold and their regular silver finish, even though I’m a Metabo HPT guy. Speaking of, Metabo HPT just put out a brand new bit set that people like me have been longing for and the case is the best in the business for sure, I haven’t put much work in with the hardware inside, but it’s black and looks nice with a little green branded logo band around each piece, similar to other common bit sets. I am just impressed with the case.
@ProjectFarm 2 жыл бұрын
Thanks for sharing.
@casualriley 4 жыл бұрын
Watching the bits snap and hearing the "crack" was incredibly satisfying for some reason, like shop monkey ASMR
@ProjectFarm 4 жыл бұрын
Glad you enjoyed!
Project Farm
Рет қаралды 1,5 МЛН
Фани Хани
Рет қаралды 1,4 МЛН
奧特羅羅 Ultraman
Рет қаралды 6 МЛН
Project Farm
Рет қаралды 2,1 МЛН
Project Farm
Рет қаралды 2,4 МЛН
Project Farm
Рет қаралды 1,4 МЛН
Project Farm
Рет қаралды 3,6 МЛН
Project Farm
Рет қаралды 4,9 МЛН
Project Farm
Рет қаралды 2,1 МЛН
Project Farm
Рет қаралды 1,3 МЛН