PRx Performance Squat Rack Home Gym Assembly & Installation DIY Step-By-Step Guide | Great Gift Idea
Рет қаралды 30,417
3 жыл бұрынHello everyone. Welcome back to Mastering Mayhem. This video is a DIY video of the PRx Performance Squat Rack Home Gym Assembly & Installation Step-By-Step Guide Gift Idea. If this video was helpful and encouraging in enabling you to install this set please show your support by liking, sharing, commenting, clicking the notification bell and SUBSCRIBING if you are not already subscribed. Thanks again and until next time, I only hope all the best to you and yours.
Profile® PRO Squat Rack with Multi-Grip Bar
prxperformance.com/collection...
#prxperformace #homegym #diyinstallation
@r0mulyni2 3 жыл бұрын
Thank you buddy for detailed install.
@JoshR324 3 жыл бұрын
Just got this rack. Thanks for the best install video for it on KZfaq.
@MasteringMayhem 2 жыл бұрын
You’re very welcome
@sridhar125 3 жыл бұрын
awesome, thanks for the detailed instructions!
@MasteringMayhem 3 жыл бұрын
You bet. I’m hoping this will help a lot of people in assembling and installing the PRx system on their own. I hope you and yours are well.
@maskerade81 2 жыл бұрын
Thank you for this video.
@a.carvalho8317 2 жыл бұрын
Very informative!
@davidmolina8999 3 жыл бұрын
I'm installing one tomorrow. Wanted to make sure I'm prepared for it so I'm watching this. Very informative I now know what to take. Thanks and keep up the great work!
@MasteringMayhem 3 жыл бұрын
You’re welcome. Thanks again for the support 🙂✌️❤️
@davidmolina8999 3 жыл бұрын
@@MasteringMayhem kzfaq.infoVI4cbz1aYpk The finished product. The picture on the instruction manual was a bit overwhelming( for a first timer at least). I just followed along the video instead lol.
@MasteringMayhem 3 жыл бұрын
@@davidmolina8999 Just left a comment. Great job on it. Glad the video helped.
@arcck 3 жыл бұрын
Great video, man!
@MasteringMayhem 3 жыл бұрын
Thank you. Thanks for supporting the channel 🙂✌️❤️
@ralphkensley5165 3 жыл бұрын
Thank you for this
@MasteringMayhem 3 жыл бұрын
You’re welcome 🙂
@TheSapShop Жыл бұрын
Awesome video I do think that a lazer
@RCB504 3 жыл бұрын
You have the exact one I have and color.
@bertzel1977 Жыл бұрын
Great video, thanks for putting this together. How long did the install take?
@ramsesrodriguez3683 3 жыл бұрын
I have not seen many DIY in your videos, maybe this is a good opportunity to turn this expensive system into an inexpensive project
@olivia717 2 жыл бұрын
Awesome video and great detailed explanations! Getting ready to install mine. You’re not planning to come to San Diego soon, are you? 😝
@MasteringMayhem 2 жыл бұрын
Nooo time soon. Just saw this comment. Were you able to get the equipment assembled and installed?
@jjdawg1963 3 жыл бұрын
Man who's garage is that!!?? Oh it mine!!! Yeah, My man did a super awesome job!!!
@MasteringMayhem 3 жыл бұрын
Hey! It is a nice garage for sure! Thanks for stopping by the channel. I’ll get back to you about those accessories. I hope you and yours are well 🙂✌️❤️
@lloydwheeler2371 3 жыл бұрын
That turned out great I’d pay you to install mine.
@MasteringMayhem 3 жыл бұрын
If your near San Antonio or Austin Texas we can make it work. Unless you want to fly me and my family out to you? Or road trip? 🙂✌️❤️
@jgreen4880 3 жыл бұрын
Wow man that’s perfect did a great job if you wanna come do mine I’ll pay you
@MasteringMayhem 3 жыл бұрын
Thank you. It depends on where you live. Are you near Austin or San Antonio, Texas? Thanks for watching and I appreciate the comment. I hope 2021 is staring off well for you and yours. Don’t forget to enter my GIVEAWAY if you like power tools.
@richierich24d26 3 жыл бұрын
Hi! I live in San Antonio. How much do you charge for installation? I have the same rack without the folding bench. Thank you 🙏
@Liz-fv6jh 3 жыл бұрын
I’m so dizzy. My rack is otw. I wish they would install for me. Single lady here 🤚🏽. Luckily my dad will help me get it set up.
@MasteringMayhem 3 жыл бұрын
You two can definitely do it. Just take your time and trust your abilities. Let me know how it turns out. I hope my video helps. We hope you and yours are well 🙂✌️❤️
@thomasnguyen5330 3 жыл бұрын
What did you add to the bottom right post to level the rack since the garage has a slope?
@MasteringMayhem 3 жыл бұрын
I didn’t add anything, the slope was so minimal it didn’t affect the function of the customers rack. If it is significant enough to where it causes issues I would add a plastic or rubber boot of some sort or a plastic, rubber or even wood shim if need be. I hope that helps?
@75andre85 2 жыл бұрын
It says in the instructions if you have 24" stud spacing you can use just 3 lag screws (left middle and right holes). Would you recommend this or should I get 2x6 stringers since I have a 24" gap?
@MasteringMayhem 2 жыл бұрын
I would go with what they say works.
@darrennguyen8122 3 жыл бұрын
Do you need to worry about the studs being strong enough to hold the weights when not in use?
@MasteringMayhem 3 жыл бұрын
No sir. Studs can hold as many plates as you can put on the plate holder. 🙂✌️❤️
@lobsterlipps Жыл бұрын
Its been a couple of years has anyone had any wall issues? My only concern would be too much load on the wall. I have heavy items in the room above where this would go.
@victorfernandez1999 3 жыл бұрын
Im thinking of getting one of this racks, I’m installing it in a basement it has concrete walls will this rack work?
@MasteringMayhem 3 жыл бұрын
Yes, it will work. You need concrete anchors to attach it to that wall. Also, the ceiling has to be at least 108” high In order for the rack to be able to sit flush against the wall. 🙂✌️❤️
@mohakand1 3 жыл бұрын
My garage floor to ceiling height is 9 feet 1 inch. Will this prx rack fit with the mentioned height? Plz advise
@MasteringMayhem 3 жыл бұрын
It depends in which one you get. In the description of the model you are considering it should tell you how high your ceiling needs to be.
@victorpatrocino2953 3 жыл бұрын
This is awesome how much do you charge to do this? I’ll have you do mine if you don’t mine. Just moved to area
@MasteringMayhem 3 жыл бұрын
If you’re near Austin or San Antonio we can make it work.
@perrys8701 3 жыл бұрын
How do I get in contact with you for an installation of my PRX? I’m in Killeen
@Jcpineda26 3 жыл бұрын
How tick are those side arms? The side brackets and the stringers?
@MasteringMayhem 3 жыл бұрын
1/8” - 3/16” Thick from memory
@abermudez9592 3 жыл бұрын
Hi! How much do you charge for an install? I appreciate how detailed and precise you are. Great video!!
@MasteringMayhem 3 жыл бұрын
Hello. I charge between $250-450 depending on how many accessory pieces there are in addition to Squat rack.
@abermudez9592 3 жыл бұрын
@@MasteringMayhem Awesome! I live in a neighboring town to Killeen close to Ft. Hood. Do you travel that far?
@MasteringMayhem 3 жыл бұрын
@@abermudez9592 I sure do. IM me on my Instagram page with your contact info and I’ll send you a text tomorrow sometime.
@mattdecker8879 2 жыл бұрын
@@MasteringMayhem I live in central Illinois and need to find someone to put mine up. I have all the accessories. Wish you were closer
@kwhitevuu99 3 жыл бұрын
You can drill it? You don't have to worry about wall studs?
@MasteringMayhem 3 жыл бұрын
You have to put it in the studs of the wall.
@Alaskanxeotheze Жыл бұрын
How do I set up my T Bar?
@timothyluke3709 3 жыл бұрын
was this mounted into metal studs?
@MasteringMayhem 3 жыл бұрын
No, it was wood studs but you should be able to mount the rack to metal studs as well. Just pre-drill the studs or use self tapping screws.
@timothyluke3709 3 жыл бұрын
@@MasteringMayhem how big would you say the predrilled holes need to be?
@EatMeatStayHealthy 3 жыл бұрын
My house doesn’t have any studs. Can I use 3M heavy duty tape with gorilla glue
@MasteringMayhem 3 жыл бұрын
You can use that but it won’t work 🙂✌️❤️
@c0011j 3 жыл бұрын
I dont know if i missed it... how high was the ceiling for this garage?
@c0011j 3 жыл бұрын
nvm.. i can tell by the way the arms are out straight it is a 108 most likely.
@MasteringMayhem 3 жыл бұрын
@@c0011j he had a really high ceiling in this garage. Not your usual height. From what I remember it was 10’ high (120”).
@keithsmith1798 3 жыл бұрын
How long did it take you?
@MasteringMayhem 3 жыл бұрын
About 4 hours
@4x13 3 жыл бұрын
Is this 90" or 96" rack?
@MasteringMayhem 3 жыл бұрын
It’s the 96” rack. It was the taller one. Assembled it for a client.
@yukidejesus1956 2 жыл бұрын
do you really need 114in ceiling?
@MasteringMayhem 2 жыл бұрын
Yes. Otherwise when you lift the rack up for storage the lower ceilings will not allow it to store against the wall.
@Offline836 2 жыл бұрын
The PRX manual says 69 inches from bottom to top mounting bracket. Your paper says 75 inches.
@underminded02 2 жыл бұрын
Honestly, what’s with the mask? Go from not wearing one, to wearing one, to not wearing one??
@MasteringMayhem 2 жыл бұрын
I would only wear it when the customer was around. When I was by myself I’d take it off.
Poly Holy Yow Spanish
Рет қаралды 26 МЛН
Challenge Theory
Рет қаралды 30 М.
Kaizen DIY Gym
Рет қаралды 45 М.