Psytrance Kick Tutorial | Punch & Depth

Psytrance Kick Tutorial | Punch & Depth | by E-Clip

Рет қаралды 14,319

Күн бұрын

Psychedelic Tips Vol.3: bit.ly/ptv3tv1
Kick&Bass Class: bit.ly/3JLWlSc
Psychedelic Tips Vol.2: bit.ly/3TUoQ4M
E-Clip WebShop: www.eclipmusic.com/shop
Psytrance Kick Tutorial about the depth and punch. The most important elements in the Psytrance tracks are Kick and bass, as they will be the most repeated elements and therefore they will be heard most of the time, so we can not allow that we have any mistakes, as if we do, it will cause the whole track to sound not good as it could. In this video, I have shared plenty of advice on how to achieve the good-sounding psytrance kick that will provide enough depth and punch in your tracks.
Subscribe: bit.ly/EClipSubscribe
Website: www.eclipmusic.com/
Facebook: /
Soundcloud: / e-clip
Instagram: /
#Psytrance #PsychedelicTrance #Trance #E-Clip

Пікірлер: 73

@EClipChannel Жыл бұрын

Kick2 Preset Download Page: www.eclipmusic.com/post/psytrance-kick-tutorial-depth-punch

@psychogen604 Жыл бұрын

I guess its pushed out at the same time as the video.. in 2 hours, the link is "We Couldn’t Find This Page"

@EClipChannel Жыл бұрын

@@psychogen604 the page will be available in the same time as video. 18:00 CET , in 3hrs

@Plotkin_ 16 күн бұрын

Man you’re a true professional

@theunconciousmind7314 Жыл бұрын

I've been waiting for this 😁

@Skanoh Жыл бұрын

This is some great knowledge you dropped on us! Thank you so much:)

@swisavi Жыл бұрын

graet turturial!! watining for the bass line ////

@papuyonic Жыл бұрын

What a beautiful masterclass ❤

@DigitalMatterMusic Жыл бұрын

Big thanks x the preset, as always, big content!

@arthurcuevas5432 10 ай бұрын

amazing tutorial and amazing bassline Clip

@floatinganarchychannel3204 Жыл бұрын

Thank you for this amazing tutorial!

@myriaddsystems Жыл бұрын

Hurray! A Kick 2 indépendant tutorial😁

@TechVarLAB Жыл бұрын

Cool track !

@Solarisbr Жыл бұрын

keep the great work =D

@ricardolimalopes2343 8 ай бұрын

Thank you so much

@Nenko_Music Жыл бұрын

good stuff.thk you sir😎

@digitalbraincreativegames Жыл бұрын

Perfeito!!

@myriaddsystems Жыл бұрын

THANKS!

@zenyonnocomment4399 Жыл бұрын

Iove you bro. ❤

@kenjipereznagano3811 Жыл бұрын

Tnks so so so much! i apreciate a lot a lot!!!!!

@EClipChannel Жыл бұрын

You are welcome

@luapld Жыл бұрын

this topic is so logic but i was never thinking about it so exactly like you :D great 👍👍👍

@EClipChannel Жыл бұрын

Yea, I also never had the same thoughts before started making videos. I’m learning so much by doing this!

@luapld Жыл бұрын

@@EClipChannel then make more videos 😁

@cryptout Жыл бұрын

The last tip is golden, don't over tweak the Kiba in the beginning of the track but at the end.

@EClipChannel Жыл бұрын

😉

@ColdRane Жыл бұрын

Hey E-Clip, I really appreciate your Videos. I learn a lot from you. Could you please remove the Lense flares flying over the video? I find them very distractive. Thank you very much! :)

@truthbetold2012 Жыл бұрын

can you do one on making the high end wide and shimmery especially the hats.

@EClipChannel Жыл бұрын

Sure

@morsecode_GR Жыл бұрын

Hi E -Clip! Another great video. apply in my group kick - bass a pha-979 and with -1 or +1 i see a difference in hole mix. i hear more clear the kick bass. what your opinion?

@EClipChannel Жыл бұрын

That’s good, but I didn’t understand -1 or +1, but anyway, if you are getting results you need, then I don’t need to understand 🙂

@deoananas4745 9 ай бұрын

14:10 how did you made the totalyzer visible on top of everything in cubase while you click on other plugins? Very nice channel and video clips btw

@EClipChannel 9 ай бұрын

Yes, there is “always on top” option!

@SuckeroftheYear Жыл бұрын

@drdubs8934 Жыл бұрын

What kind of settings do you use on ur Digicheck? I know this is more or less taste but , are there some important ones i need to consider?

@EClipChannel Жыл бұрын

I think you should use what you are used to. I use other ones if I need to analyze in detail, spectrogram or waterfalls, as free response won’t show the decay of the frequencies which I believe is one of the most important things

@Martin-vj7zx Жыл бұрын

Kick is not tonal, but isn't it nice when the lowest frequency of the kick ends where the base starts and to make them the same frequency?

@EClipChannel Жыл бұрын

Defo. But not for all keys.

@ehlerszorgman1298 Жыл бұрын

With so much Eq and processing on the kick.... doesn't it effect the shape ? I have see on a scope after applying only eq on the kick in kick2 the shape of the kick changes dramatically

@EClipChannel Жыл бұрын

Of course, it does! That is the purpose of EQ!

@matheusmartins6125 Жыл бұрын

Eu n entendi nd , mas sei que ele e foda d mais kkkkkkkk

@PhreaSpirit 9 ай бұрын

phase correction on a mono synth?

@EClipChannel 9 ай бұрын

Of course! Why do you think that phase can be refered to a stereo only? If you have two mono signals, their phases can cancle or boose eachother. As well, the phase position of the mono signal can influence how it will sound ( not much, but it will ).

@PhreaSpirit 9 ай бұрын

@@EClipChannel Interesting. I need to wrap my head around it. Thanks for your answers and videos - they're very helpful!

@EClipChannel 9 ай бұрын

@@PhreaSpirit phase is just a direction of the cycle. The most important is when two oscilations of similar frequecy are meeting together. It can be one of more, stereo, mono, can be two mono…

@Kikudoxx Жыл бұрын

At 10:26 u say the kick is ending at 50hz. But the window size of kick 2 is at 340ms. Obviously in the amp envelope the kick is stopped before reaching 340ms. So the kick is not ending at 50hz. I always asked myself how the window size and pitch envelope is corresponding to each other

@EClipChannel Жыл бұрын

I said “for example”, the kick ends frequency dot is at 42hz but as I said, It's only for example, to me it doesn't matter what’s the frequency as I set it by the ears. I just used it as an example. But you can rewind and see that the end dot is set at 42hz and it can be possible that the end frequency is 50hz. But again, it doesn't matter. I just spoke about the hz to make a point on which I spoke about. And if you pay attention closely, I’m sure you understand the point.

@v_north Жыл бұрын

Amp envelope adjusting itself to kick length? If you draw back the amp env the kicks last ozillation goes, then the next etc. It's been a while but I believe that was how it worked.

@EClipChannel Жыл бұрын

@@v_north not sure what you are referring to. The Kick amp in the video is around 340ms, and the envelope is ending a bit earlier. You can check the grid in Kick2, and I know that 2x1/16 on 138 bpm is around 200ms. That’s why I said it's around 200ms. About the frequencies: The endpoint is 42hz. This means that at the 340ms point, the end frequency is 42hz, so I said around 50hz as a guess that if the frequency on 340ms is 42hz was that on 200ms the frequency ending around 50hz. That was only a guess, as I am not interested in exact numbers. The kick was designed by the ears. So the first comment was that I said something which I didn’t. The end frequency point in the video is 42hz, not 50hz as you wrote in the first comment.

@Kikudoxx Жыл бұрын

@@EClipChannel ahhh now I get the point!

@v_north Жыл бұрын

@@EClipChannel I think we answered the same time, thanks for the explanation😂👍

@molandsonsmotors9690 Жыл бұрын

Tuning the kick as a whole is wrong, tuning parts of it independently makes sence. Thank you for the video. P.S. peaks and valleys could be an indication of phase cancellations in certain areas as a result of a steep high pass filter, try to experiment with a DC filter also, it tends not to shift phase much, thats why they use it a lot in mastering scenarios. I love what you are doing and will definatelly obtain your tutorials as the knowledge you share is immence without question. one more thing, try FDR(frequency dependant ratio) type of compession on kick and bass.

@EClipChannel Жыл бұрын

Personally, I do not care if it shifts the phase, as I am using the PHA-979, so any phase shit I can correct with PHA-979. Not sure what peaks are you talking about, but peaks and phases don’t have anything in common. I was referring to the peaks of the frequencies. By “tuning the parts of the kick” I believe you talk about changing the pitch of certain parts of the kick, but pitching and tuning are not the same things. Tuning the body of the kick have sense only in certain keynotes, while in some it’s completely useless.

@molandsonsmotors9690 Жыл бұрын

@@EClipChannel Would it be better applying dynamic eq instead of linear phase eq on K&B?

@EClipChannel Жыл бұрын

@@molandsonsmotors9690 linear phase causes the pre-ringing on 30db per octave and also causes a pretty big latency. This is just a matter of choice. You can use linear-phase and later bounce and get rid of the pre-ring and then delete the linear-phase plugin to get rid of the latency. Or you can use Zero latency and just bring back the phase point as it was with pha-979. It’s a matter of choice, there's no right and wrong.

@EClipChannel Жыл бұрын

@@molandsonsmotors9690 SplitEq is a kind of a dynamic eq!

@TheTraveller604 Жыл бұрын

why your fab eq is clipping red ? everything is red on the road

@EClipChannel Жыл бұрын

It’s red bacuse it’s clipping! E-Cliping!

@TheTraveller604 Жыл бұрын

mmm what ?

@Yobott Жыл бұрын

@@TheTraveller604 it's a joke mate haha, as far as I see it's only the pro-q, probably boosted it a bit too much without pulling it down back in the chain, happens.. probably a mistake

@theunconciousmind7314 Жыл бұрын

I make my kicks so diffrent! I have so much more mids in the click or punch. I wonder if its because of my bad speakers or if i just have a diffrent style or taste.

@EClipChannel Жыл бұрын

🤷🏻‍♂️

@Solarisbr Жыл бұрын

how much latency does this cause? ty

@EClipChannel Жыл бұрын

Latency coused by what? But whatever the latency is, once the kick is designed, it will be bounced to wav, and whole channel with Kick2 and processing or saved as preset or exported. So the whole process won’t cause any latency for the track

@Solarisbr Жыл бұрын

@@EClipChannel Thanks master. But after you have the kick sampled... do you cut the space before the transient on the audio? Therefore, do you phase align it with the bass, also sampled? Btw, you played on my party, Deep Forest. Hugs!

@EClipChannel Жыл бұрын

@@Solarisbr as I said, there are so many things going on and it’s a too wide a topic to answer in one video. We could go on for a very long time with so many questions like this. There are many videos on my channel on the same topic

@diegopedrada7584 Жыл бұрын

Why would I waste so much time doing the kick if I can use a ready-made kick from some Pack???? Is there a logical reason for this???

@EClipChannel Жыл бұрын

Did anybody say that you need to do it? I don't remember saying it even once. But just because You don't want to make your kicks doesn't mean that nobody else doesn't want to do it! This video is for the ones that want to make their own kicks and that way avoid using the same kick as everyone else!