Pt.3 1JZ Tune Up | Paint and Reassembly

Рет қаралды 14,383

6 жыл бұрын

Help the channel out and subscribe to the build! The 1jz is all painted and put back together. All new seals, o-rings, and belts have been put on. Can't wait until the 280z is ready to get this BEAST installed!
Support the Channel / Build -- Subscribe + Follow Thanks!
Snapchat:StewartMotoring
/ stewartmotoring
/ stewartmotoring
Song
Spektrem - Shine [NCS Release]
• Spektrem - Shine | Pro...

Пікірлер: 36

@nikrbawker 5 жыл бұрын

I'd be a little hesistant to paint the aluminum pieces. The block block is fine, not the head though aluminum really helps reduce heat when fresh air hits it with the paint on it forms a barrier just like grime I'd think, guess we'd have to see some comprehensive controlled tests to be sure don't know if anyone has done that though never seen anyone paint an engines head before.

@theonlym12 6 жыл бұрын

I wish you would have showed actually replacing the seals and everything

@Photobombin 6 жыл бұрын

Thanks for the update. Great progress!

@Gilgamesh13x 6 жыл бұрын

Good luck buddy you’re doing an awesome job

@BassheadStewie 6 жыл бұрын

Run the cover last thing you want it a rock or something getting in the gears and it jumping time.....looks good tho...you can always get clear covers aswell

@whatskilz 6 жыл бұрын

Keep up the good work man. I hope you get some more views.

@mart182003 6 жыл бұрын

Keep the timing cover on, make a small window so you can see the cam gears. The timing cover will protect the belt and anything that's in the general location. My 02.

@StewartMotoring 6 жыл бұрын

I will probably do this

@Boostmonger_Jon 6 жыл бұрын

She's gunna rip guy! I ended up putting a 5.3 in my Z because of budget constraints but the JZs sound perfect in s30s

@StewartMotoring 6 жыл бұрын

I want to do a v8 build next! Good luck

@mikegadoury6172 6 жыл бұрын

Unless the cover provides some sort of function I'd leave it off because the red gears look amazing. Nice video as usual. Your dedication to the project is inspiring.

@StewartMotoring 6 жыл бұрын

So the cover keeps debris ie rocks from getting into the belt teeth and gears and doing damage or jumping time. Other than that nothing special ;)

@nikrbawker 5 жыл бұрын

Actually if you hit something your timing system grinds into what ever is in front of it, ground a big hole in a nearly brand new coolant hose on my 7m when I hit a deer, I'm a lot more cautious driving now but it could still happen again. A deer could be a human as well or a rock or anything giant around a dark blind corner when you're cozy tired and unexpecting. It definitely adds some additional reliability during wrecks crashes or hits. Had the timing cover been on that hose would have been unharmed. Sure the hose is cheap like $8 but still as a comparison keeping it on is free. Also could help you drive the car back home in such an event with little to no damage.

@InvincibleExtremes 6 жыл бұрын

Looking forward to seeing your nice z on the road. Lots of hard going into it.

@StewartMotoring 6 жыл бұрын

That makes two of us !

@StewartMotoring 6 жыл бұрын

I love your Z btw

@InvincibleExtremes 6 жыл бұрын

Built Not Bought TV I'm neck deep in designing the mustang irs setup. And already have the front end figured out. Will post a video about that some time later

@jeffthomas6139 6 жыл бұрын

If you can, save up for a clear cover set so you can still see the pulleys and protect them from debris (if they make them that is).

@SPECIAL300MED1 6 жыл бұрын

It would be cool if u could use the AC to cool your intercooler if you can like they did the demon charger

@foolix828 6 жыл бұрын

If i had and couldt chose, with or without the cover, i would say without, the red gears seriously did make the 1jZ Looks sooo good, and new paint did the job, looks almost like a brand new motor hahaha, Awesome man! Love the build and your videos!

@StewartMotoring 6 жыл бұрын

Thanks man!

@davewm9589 6 жыл бұрын

sooner or later some piece of junk will find its way up to the belt area. Cover should help prevent and damage to belt in that event. It looks very nice but you will not be looking at it while driving.

@StewartMotoring 6 жыл бұрын

Function over form kind of guy. Your right

@nikrbawker 5 жыл бұрын

Make a clear cover for it double function over form

@NARFALICIOUS 3 жыл бұрын

Did you replace the head gasket? Just wondering. About to crack open a 1JZ VVTi myself.

@StewartMotoring 3 жыл бұрын

I didn’t. I don’t think that is really necessary for some preventative maintenance that I did. Sure you can do it but not part of the normal maintenance before running the motor