PT Cruiser Transmission Removal

Рет қаралды 9,658

Жыл бұрын

Chrysler PT Cruiser automatic transmission removal procedure. The transmission was not pulling at all in 3rd and 4th gear and would need to be revved up to go into reverse and first gear. I used a transmission from a salvage yard with only 93K on it. I did replace the filter, gasket, axle seals, and flush the system before installing it. A little extra bonus near the end is my wife helping me and you can hear her snort and laugh.
Parts:
Transmission Filter: amzn.to/3YnLXqC
Transmission Fluid: amzn.to/3Hsj32q
Axle Seals: amzn.to/3FqEcap
Transmission Flush: amzn.to/3UUJLUj
Filming Gear:
Go Pro Hero 10 Kit: amzn.to/3S9kd55
Go Pro Endurance Battery: amzn.to/3S1KXUS
Manfrotto Camera Tripod: amzn.to/3BnmYch
Instagram: / 0p_0verhaul
TubeBuddy Link: www.tubebuddy.com/operationov...
Patreon: / operationoverhaul

Пікірлер: 22

@TherapyWithWind 6 ай бұрын

New subscriber. Replacing clutch plate in my step son's recently purchased 03 pt turbo 5-speed. Thank you for the great straight forward documentation with all the helpful camera angles! I've watched a couple videos for this transmission removal and yours is by far the best! Thank you for taking your time to share and post. Merry Christmas to you and yours!

@operationoverhaul 6 ай бұрын

Thank you for the comment and I am glad that it helped you out. If you have any questions or need anything while doing the job, please feel free to ask. I do not mind helping out. You have a Merry Christmas to you and your family as well.

@davidgriffin14 Жыл бұрын

Glad to see your wife helping you.

@operationoverhaul Жыл бұрын

She helps me out more than anyone really knows. She comes out to give me a hand whenever I need someone to hold stuff, move cars that will not crank, and will even help work on them by removing stuff for me.

@dangeraghty6715 10 ай бұрын

Thanks for taking the time to make this video, it's very helpful and saved me lots of knuckle busting hours.

@operationoverhaul 10 ай бұрын

You are very welcome. I did not see many videos of this online so I figured I would do a video while making the repair

@dangeraghty6715 10 ай бұрын

@@operationoverhaul It's appreciated, I have often thought of making a video on one of the many "Jack of all Trades" things I have to do to save money, so in running it through my mind (the video process) I realized it's a project in itself. Thanks again for taking the time, Kudos.

@operationoverhaul 10 ай бұрын

@@dangeraghty6715 your welcome and if you have any questions about the video process as well feel free to ask away.

@1cont Жыл бұрын

That's a good wife right there! Thanks for explaining this.

@operationoverhaul Жыл бұрын

She is a great one. Helps me out a lot. Your welcome and I appreciate your view as well

@genespell4340 9 ай бұрын

09-17-23I have been looking for a transmission leak for a while that was caused by a bad street repair. I found it today. It was that new part that you transferred to the "new" transmission that you installed. I didn't see a photo of it in the Chilton manual. That part is high enough on the transmission to not be hit by anything. Tomorrow after work I will be aggravating somebody at AutoZone and other parts stores for a gasket and hope nothing else is damaged on the part

@operationoverhaul 9 ай бұрын

Hopefully that fixes it for you

@MagicLost 9 ай бұрын

Im going to be doing this for a family friend and its gonna suck since i have to get all the tools necessary to do this plus the tranny to swap😢 its gonna be a bit be4 i can. Luckily, the current one is surviving, but idk how long...

@operationoverhaul 9 ай бұрын

When you get to the point where you are doing it and need any advice just let me know and I can help.

@robertovallecillo6406 Жыл бұрын

On torque down on axel next time put a screw driver between the rotor it help

@operationoverhaul Жыл бұрын

I did not even think about that but I normally put them on the ground with the tire on and it normally holds it. Was a good reason to make the wife work a little lol.

@cristianlobo-qy7ih Жыл бұрын

gooood🤙

@operationoverhaul Жыл бұрын

Thanks I appreciate it. I thought it would have been a harder job just because of how many issues and crappy these cars are lol but it was not bad at all.